Mitsubishi Electric GT15V-75V4R1 Bedienungsanleitung

User's Manual

Thank you for choosing Mitsubishi Electric Graphic Operation Termi-

nal (GOT).

MODEL GT15V-75V4R1 Video/RGB Input Unit

MODEL

GT15V-75V4 Video Input Unit

MODEL

GT15V-75R1 RGB Input Unit

Prior to use, please read both this manual and detailed manual

thoroughly to fully understand the product.

MODEL GT15V-75V4R1-U

MODEL

CODE 1D7M54

IB(NA)-0800348-G(1706)MEE

A-1

SAFETY PRECAUTIONS

(Always read these precautions before using this equipment.)

Before using this product, please read this manual and the relevant manuals

introduced in this manual carefully and pay full attention to safety to handle the

product correctly.

The precautions given in this manual are concerned with this product. In this

manual, the safety precautions are ranked as "WARNING" and "CAUTION".

Note that the caution level may lead to a serious accident according to the

circumstances. Always follow the instructions of both levels because they are

important to personal safety.

Please save this manual to make it accessible when required and always forward

it to the end user.

Indicates that incorrect handling may cause hazardous

conditions, resulting in death or severe injury.

Indicates that incorrect handling may cause hazardous

conditions, resulting in medium or slight personal

injury or physical damage.

WARNING

CAUTION

A-2

[DESIGN PRECAUTIONS]

[MOUNTING PRECAUTIONS]

Do not bunch the control wires or communication cables with the main circuit

or power wires, or lay them close to each other.

As a guide, separate the lines by a distance of at least 100mm (3.94 inches)

otherwise malfunctions may occur due to noise.

Be sure to shut off all phases of the external power supply used by the system

before mounting or removing this unit onto/from the GOT.

Not doing so can cause the unit to fail or malfunction.

Use this unit in the environment that satisfies the general specifications

described in the User's Manual for the GOT used.

Not doing so can cause an electric shock, fire, malfunction or product damage

or deterioration.

Tighten the mounting screws within the specified torque range.

Undertightening can cause the GOT to drop, short circuit or malfunction.

Overtightening can cause a drop, short circuit or malfunction due to the

damage of the screws or the GOT.

Do not touch the conductive and electronic parts of the unit directly.

Doing so can cause a unit malfunction or failure.

CAUTION

WARNING

CAUTION

A-3

[WIRING PRECAUTIONS]

Be sure to shut off all phases of the external power supply used by the system

before wiring.

Failure to do so may result in an electric shock, product damage or

malfunctions.

Exercise care to avoid foreign matter such as chips and wire offcuts entering

the GOT. Not doing so can cause a fire, failure or malfunction.

Make sure to securely connect the cable to the connector of unit.

Incorrect connection may cause malfunctions.

Do not hold the cable by hand and pull it out from the unit.

When removing the cable from the unit, make sure to hold the connector by

hand and pull it.

Failure to do so may cause malfunctions or damage to the unit or cable.

Solder the coaxial cable connector correctly.

Incomplete soldering may cause a malfunction.

WARNING

CAUTION

A-4

[STARTUP/MAINTENANCE PRECAUTIONS]

[DISPOSAL PRECAUTIONS]

[TRANSPORTATION PRECAUTIONS]

When power is on, do not touch the terminals.

Doing so can cause an electric shock or malfunction.

Before starting cleaning, always shut off GOT power externally in all phases.

Not doing so can cause a unit failure or malfunction.

Undertightening can cause a short circuit or malfunction.

Overtightening can cause a short circuit or malfunction due to the damage of

the screws or unit.

Do not disassemble or modify the unit.

Doing so can cause a failure, malfunction, injury or fire.

Do not drop the module or subject it to strong shock.

A module damage may result.

Before touching the unit, always touch grounded metal, etc. to discharge static

electricity from human body, etc.

Not doing so can cause the unit to fail or malfunction.

When disposing of the product, handle it as industrial waste.

Make sure to transport the GOT main unit and/or relevant unit(s) in the

manner they will not be exposed to the impact exceeding the impact

resistance described in the general specifications of the User's Manual for the

GOT used, as they are precision devices.

Failure to do so may cause the unit to fail.

Check if the unit operates correctly after transportation.

WARNING

CAUTION

A-5

REVISIONS

* The manual number is noted at the lower right of the top cover.

Print Date *Manual Number Revision

Mar., 2006 IB(NA)-0800348-A First edition

Feb., 2007 IB(NA)-0800348-B

Chapter1, Section 2.4.1

Compliance with the EMC and Low

Voltage Directives

Jul., 2007 IB(NA)-0800348-C

Compliance with the EMC and Low

Voltage Directives, Chapter 2, 3, 4

Jun., 2009 IB(NA)-0800348-D

Compliance with the EMC and Low

Voltage Directives

Jun., 2011 IB(NA)-0800348-E

Compliance with the Radio Waves Act

(South Korea)

May, 2015 IB(NA)-0800348-F

Cover

Jun., 2017 IB(NA)-0800348-G

Cover

This manual confers no industrial property rights or any rights of any other kind,

nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot be

held responsible for any problems involving industrial property rights which may

occur as a result of using the contents noted in this manual.

Partial addition

Addition

Partial corrections

Addition

Partial corrections

A-6

CONTENTS

1. OVERVIEW .................................................................................................... 1

2. SPECIFICATIONS ......................................................................................... 4

2.1 Video input unit specifications ................................................................. 4

2.2 RGB input unit specifications ...................................................................5

2.3 Video/RGB input unit specifications ........................................................ 6

2.4 Cable specifications ................................................................................. 7

2.4.1 Specifications of the cables (coaxial cables) used when

displaying video images .................................................................. 7

2.4.2 Specifications of the cables (9-core combined cables) used

when displaying RGB screens ...................................................... 10

3. PART NAMES AND EXTERNAL DIMENSIONS ......................................... 11

3.1 Part names and external dimensions of the video input unit ................. 11

3.2 Part names and external dimensions of the RGB input unit .................. 12

3.3 Part names and external dimensions of the video/RGB input unit ........13

3.4 External dimensions of the extension interface relay board .................. 14

4. INSTALLATION PROCEDURE ................................................................... 15

A-7

Packing List

The following items are included.

Compliance with the EMC and Low Voltage Directives

To configure a system meeting the requirements of the EMC and Low Voltage Directives

when incorporating the Mitsubishi GOT (EMC and Low Voltage Directives compliant) into

other machinery or equipment, refer to "EMC AND LOW VOLTAGE DIRECTIVES" of the

General Description included with the GOT used.

The CE mark, indicating compliance with the EMC and Low Voltage Directives, is printed on

the rating plate of the GOT.

Model Product Quantity

GT15V-75V4

Video input unit 1

Mounting screw set (2 screws,2 stickers) 2

Extend interface relay board 1

GT15V-75R1

RGB input unit 1

Mounting screw set (2 screws,2 stickers) 2

Extend interface relay board 1

GT15V-75V4R1

Video/RGB input unit 1

Mounting screw set (2 screws,2 stickers) 2

Extend interface relay board 1

Manuals

The following shows manuals relevant to this product.

For relevant manuals, refer to the PDF manuals stored in the DVD-ROM for the drawing

software used.

Detailed Manual

Manual name Manual number

(Model code)

GT15 User's Manual

(Sold separately)

SH-080528ENG

(1D7M23)

GOT1000 Series Connection Manual (Microcomputer,

MODBUS Products, Peripherals) for GT Works3

(Sold separately)

SH-080871ENG

(1D7MC5)

Relevant Manuals

1. OVERVIEW

This User's Manual is related to the following units.

• MODEL GT15V-75V4 Video Input Unit (hereinafter referred to as the Video

Input Unit)

• MODEL GT15V-75R1 RGB Input Unit (hereinafter referred to as the RGB

Input Unit)

• MODEL GT15V-75V4R1 Video/RGB Input Unit (hereinafter referred to as the

Video/RGB Input Module).

When mounting the above units with the GT1585V-STBA, GT1575V-STBA

(hereinafter referred to as GOT), the images taken by video cameras or screens

on personal computers can be displayed on the GOT.

The video input unit can display the images taken by up to 4 video cameras on

the GOT.

GOT can be used as a vision sensor monitor.

*1: Power on the video camera simultaneously with the GOT.

*2: Power supply for the camera may be necessary depending on the

vision sensor to be used.

Image data

GOT

GT15V-75V4

Camera power pack

Video camera

Vision sensor (AS50VS or other)

The RGB input unit can display a personal computer display on the GOT.

Video input is also available using an RGB output type vision sensor.

*1: When connecting with a personal computer, ground wire of the

computer should be grounded.

For the video/RGB input unit, functions of both video input unit (GT15V-75V4) and

RGB input unit (GT15V-75R1) are available.

When connecting to a personal computer

GOT+GT15V-75R1

When connecting to a video camera using an RGB output type vision sensor.

RGB output type

vision sensor

GOT+GT15V-75R1

A1254

348

GOT

GT15V-75V4R1

Video camera

Computer PLCs for line control

Don ot mount not desmount

amo dule while th e powe r is

supplied.

CAUTION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Electric E/A-System Handbücher

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65VBTCE3-32D-U Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65FBTA42-16DTE Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A7AX E kit-SC Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MelcoREMOTE Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric GT15V-75V4 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65SBTC1-32DT Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65SBTC1-32DT1 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric QD62 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric CL1XY2-DT1D5S Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric A1S66ADA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65BTS-RPH Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65VBTCE3-16D Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65SBTB1-32T-U Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65SBTC1-32DT2 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric NZ2GFSS2 32D S1 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELSEC L Seies Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F FX5 Service-Handbuch

Mitsubishi Electric

Mitsubishi Electric AJ65SBTB2N-16A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65SBTC1-32T1 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65VBTS3-16D Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric AJ65FBTA2-16T Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung