Mitsubishi Electric NP180 Series Benutzerhandbuch

Narrow Pixel Pitch Direct View LED

NP180 Series

NP160 Series

Setup Manual

Rev. 2.2

March 29, 2019

2NP180/160 Series Setup Manual

Contents

OVERVIEW..................................................................... 3

1. PRODUCT LINE ........................................................3

2. FLOWCHART............................................................ 4

PHYSICAL INSTALLATION.......................................... 5

1. SAFETY PRECAUTION...............................................5

2. PREPARATION .........................................................6

Necessary network cables............................................6

Necessary tools ..............................................................6

Lock screw releasing (front models) ..........................6

Connection diagram .....................................................7

Connection details....................................................... 10

Input board installation (when necessary).............. 12

Unit placing................................................................... 13

Work space for installation ........................................ 13

3. LED UNIT MOUNTING........................................... 14

Base stand..................................................................... 14

LED units........................................................................ 14

ELECTRICAL ADJUSTMENT .......................................19

1. INITIAL SETTING......................................................19

DIP switch on power unit (160 Series) ..................... 19

DIP switch on control unit..........................................20

Turning-on .................................................................... 21

Wallaby setup...............................................................22

2. BASIC SETTING...................................................... 23

Configuration................................................................23

Color calibration memory..........................................26

System memory...........................................................28

Input memory...............................................................29

Display memory...........................................................30

Memory calling .............................................................31

3. ADVANCED SETTING (WHEN NECESSARY)........... 32

Detailed system memory setting..............................32

Detailed input memory setting.................................36

OPS computer setting ................................................37

Wallaby menu bar.......................................................38

MAINTENANCE...........................................................39

1. LED MODULE REPLACEMENT............................... 39

Front maintenance models........................................39

Rear maintenance models......................................... 41

2. BOUNDARY ADJUSTMENT .................................... 43

3. COLOR ADJUSTMENT ........................................... 44

4. CIRCUIT BOARD REPLACEMENT............................ 46

5. STATUS INFORMATION......................................... 47

Information menu........................................................47

Status indicators...........................................................48

REVISION HISTORY....................................................49

Overview 3

Overview

Piling up the LED units, various sizes of the direct view LED walls can be configured.

1. Product line

Main Products

Range

Model

LED unit

Control unit

Power unit /

Adapter

Servicing

HD stack

height

12NP180

12NP180F

VS-12NP180F

VS-12NP180FD

VC-NP1000

S-NP18ACS

Front

Even

VS-12NP180FH

Odd

12NP180R

VS-12NP180R

VS-12NP180RD

Rear

Even

VS-12NP180RH

Odd

15NP180

15NP180F

VS-15NP180F

Front

15NP180R

VS-15NP180R

Rear

15NP160

15NP160F

VS-15NP160F

S-NP15PWR

Front

15NP160R

VS-15NP160R

Rear

Optional products

You can choose suitable options for various system configurations.

For 180 Series

Spare

LED module

12NP180F

12NP180R

S-NP1218FS

S-NP1218RS

15NP180F

15NP180R

S-NP1518FS

S-NP1518RS

AC power cord:

Adapter to LED unit

2 m

5 m

8 m

JC-PC3AC2

JC-PC3AC5

JC-PC3AC8

For 160 Series

Spare

LED module

15NP160F

15NP160R

S-NP15FS

S-NP15RS

DC power cord:

power unit to LED

unit

2 m

5 m

8 m

12 m

15 m

20 m

30 m

60 m

JC-PC3DC2

JC-PC3DC5

JC-PC3DC8

JC-PC3DC12

JC-PC3DC15

JC-PC3DC20

JC-PC3DC30

JC-PC3DC60

Redundant power unit

S-NP15PWR-EX

Common

SDI input board

DP-1SDI-3G

HDBaseTTM input board

VC-LM1HD

AC power cord:

electrical outlet to

equipment

(3 meters)

North

America

JC-PC3MUS (16 AWG)

Europe

JC-PC3ME

Russia

JC-PC3MR

Japan

JC-PC3MJ

Recommended

Intel®OPS board

Advantech DS280

(i7-6822EQ, 4+4 GB DDR4,

SSD or HDD)

Adjustment software

Wallaby for NP

LED detachment tool

(for front maintenance

model)

S-160DT

Spacers

(for edge protection

at LED unit mounting)

S-160SP

4NP180/160 Series Setup Manual

2. Flowchart

Base stand installation (p. 14)

LED unit mounting (p. 14)

Cable connection (p. 10)

Initial setting (p. 19)

Configuration setting (p. 23)

Auto color calibration (p. 26)

Edge brightness compensation (p. 26)

Manual color adjustment (p. 44)

Luminous sensor run (p. 28)

Input signal scanning (p. 29)

Detailed Input signal setting (p. 36)

Scaling setting (p. 30)

Detailed system setting (p. 32)

Finish

Physical installation 5

Physical installation

1. Safety precaution

This product requires special installation to

prevent falling or toppling. This should be done

by installation specialists.

Be sure to read this manual and the user’s manual

for your safety before starting assembly or

installation.

Be sure to use supplied accessories for assembly

or installation.

Attach all the screws and fixtures specified in this

manual securely.

Do not dissolve or revamp the product except the

areas which are specified in this manual.

Do not install this product on an inclined place or

unstable place. The product may drop or fall over

which may cause injury.

Reinforce the wall surface and floor so that it can

support the total weights of the products

permanently and resist earthquakes, possible

vibrations, and external forces.

Ensure that the safety factor per bolt is more than

12 (or ensure that the total bolts bear 12 times of

the total weights of the products and the

brackets).

Do not install the product near a heater or in a

humid, dusty or smoky location.

Do not install the product with its intakes, exhaust

slots and ventilation holes blocked. Inside the unit

may overheat and cause a fire or breakdown.

Be sure to mount/demount the LED units by 2 or

more people. These works may be perilous

particularly on a height or a narrow scaffold.

Unplug immediately if there is something wrong

with your product.

Be careful not to twist or bend the LED surface.

Be careful not to bump or apply pressure on the

LED surface and the edges.

Do not place the LED surface down. In case you

have to, be sure to place it on a flat surface with

a something soft like a blanket underneath. And

be careful not to scratch the LED surface or allow

the surface to be subjected to excessive pressure.

Also do not leave the LED unit face-down for a

long while.

Electrostatic discharge may harm the surface of

the LED units. To prevent such damage, you

should discharge static electricity from your body

before you contact with the LED units. In addition,

during the installation/maintenance work,

remove any static charge that your body may

have accumulated by touching a metal-grounded

object periodically as an example.

Wear gloves for protection to handle the

products. However, touch the LED surface with

degreased bare hands.

The front maintenance models use magnets.

Keep away pacemakers, medical devices or

general electronics devices that are affected by

magnetic attraction. Magnetic fields may affect

the operation of these devices.

Do not reel or bind up the power cords to use.

They may get hot and be in danger of fire.

6NP180/160 Series Setup Manual

2. Preparation

Necessary network cables

Prepare the following commercially-available network cables. The length and quantity vary depending on the

system configurations.

For video

transmission

control unit to LED units

Up to 10 m:

Up to 15 m:

Up to 20 m:

CAT 7 network cables

CAT 7 solid conductor or CAT 7A network cables

Mitsubishi confirmed network cables

between LED units

Recommended:

0.7 m or longer

CAT 7 network cables

For controlling

(160 Series)

control unit to power unit

Up to 60 m*:

CAT 5 or higher network cables

between power units

Recommended:

0.2 m or longer

*: It is the total length between the control unit and the last cascaded power unit.

Necessary tools

Hex key

5 mm

Philips screwdriver

Wrench

13 mm (for nuts that fix the adjustment screws)

Digital level

Recommended: accuracy: 0.05° or finer, length: 600 mm or longer

Spacers

(for edge protection at

LED unit mounting)

S-160SP (p. 3): a set of 0.075, 0.100, 0.125, 0.188 mm thickness spacers

Recommended thickness when using store-bought spacers: 0.07 mm to 0.19 mm

Thin spacers

(for LED unit height alignment)

Recommended thickness: 20 μm to 50 μm, tapes or shim rings etc. (p. 17)

Lock screw releasing (front models)

Before installation, remove 12 lock screws for transportation

with a screw driver from each LED unit of the front

maintenance models.

Without releasing, you may not able to remove an LED

module (p. 39) if the LED wall doesn’t have enough back

space.

The rear maintenance models don’t have such lock screws.

Physical installation 7

Connection diagram

Before installation, calculate necessary cable length for external connection to prepare them.

12NP180

For even numbers of full HD stack height (an example of 2x2 full HD resolution)

For odd numbers of full HD stack height (an example of 2x1 full HD resolution)

Numbers mentioned in this diagram are for a full HD resolution.

Store-bought network cables (p. 6)

Optional AC power cords from outlet

Optional AC power cords

Supplied AC power cords

Network switch

Wallaby

Control unit x1

x10

VS-12NP180*

VS-12NP180*D

VS-12NP180*

Network switch

Wallaby

x10

VS-12NP180*

VS-12NP180*H

Adapter x3

Control unit x1

8NP180/160 Series Setup Manual

15NP180

An example for 4K resolution

Numbers mentioned in this diagram are for a full HD resolution.

Store-bought network cables (p. 6)

Optional AC power cords from outlet

Optional AC power cords

Supplied AC power cords

Network switch

Wallaby

Control unit x1

x15

Adapter x3

Physical installation 9

15NP160

An example for 4K resolution

Numbers mentioned in this diagram are for a full HD resolution.

Store-bought network cables (p. 6)

Optional AC power cords

Optional DC power cords

Supplied DC power cords

Supplied control cables

x15

Power unit x3

Control unit x1

Wallaby

Network switch

10 NP180/160 Series Setup Manual

Connection details

Connect the cables in between the LED units while LED unit mounting (p. 14).

Image signal cables

With the store-bought network cables (p. 6), create

a close loop from OUT to IN in each output channel

on the control unit through the LED units.

The connectors on the LED units of 180 Series are

located on a side.

Each output channel on a control unit has its own

display area as below. Connect the cables to the

associated LED units with each area.

12NP

15NP

CH 4 and 5 are not used in these models.

Connection rules

One control unit displays up to the full HD

resolution (1920 x 1080 pixels). Multiple control

units are needed for larger sizes.

Up to 64 control units can be cascaded in an

LED wall.

They are two-way traffic. Even if one of the LED

units fails in a loop, only the failed unit loses the

image and the downstream units keep showing

the images.

Downstream units

0 1920 3840

1080

2160

OUT IN

0 1920

1080

CH 1 | CH 2 | CH 3 | CH 4 | CH 5

0 1920

1080

CH 1 | CH 2 | CH 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Electric Industrieelektrik Handbücher

Mitsubishi Electric

Mitsubishi Electric C Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric RV-FR Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric A1SJ71DN91 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MV Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric NF400-SEW Bedienungsanleitung

Beliebte Industrieelektrik Handbücher anderer Marken

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Technisches Handbuch

Abtech

Abtech HVJB Series Leitfaden

Murata

Murata GRM0335C1H8R1DA01 Series Bedienungsanleitung

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Bedienungsanleitung

Eaton

Eaton Ulusoy HMH24-04 Bedienungsanleitung

Newlong

Newlong NP-7H Bedienungsanleitung

Murata

Murata GJM0335C1E4R4BB01 Series Bedienungsanleitung

Stahl

Stahl 8575/12 Bedienungsanleitung

SI Pegasus Bedienungsanleitung

Murata

Murata GRM1555C1H2R7CA01 Seies Bedienungsanleitung

Murata

Murata GRM0225C1E6R4BA03 Series Bedienungsanleitung

Cooper Power Systems

Cooper Power Systems VXE15 Bedienungsanleitung

S&C

S&C Vista SD Bedienungsanleitung

Murata

Murata GRM0335C2A7R3CA01 Series Bedienungsanleitung

Siemens

Siemens 3VA9988-0BM10 Bedienungsanleitung

Siemens

Siemens SITRANS LVS100 Bedienungsanleitung

Murata

Murata GRM32ER60G227ME05 Series Bedienungsanleitung

Siemens

Siemens SENTRON SUPERSWITCH 3KL82 Series Bedienungsanleitung