Mitsubishi Electric FR-PA07 Bedienungsanleitung

Enclosure surface operation panel

FR-PA07 INSTRUCTION MANUAL

INVERTER

Thank you for purchasing the enclosure surface operation panel (FR-PA07). This instruction manual

gives handling information and precautions for use of this product. Incorrect handling might cause

an unexpected fault. Before using this product, please read this manual carefully to use this product

to its optimum performance.

Please forward this instruction manual to the end user.

This product is an option dedicated for the FR-E800 */E700/D700/F700PJ/E700EX/D700-G series.

Refer to the inverter unit's Instruction manual for details on the operation panel functions, operation

methods and handling methods.

* Only the FR-E800 standard model is supported.

1. Connection

• Use the FR-CB20connection cable. Insert one end of the cable into the PU connector on the

inverter, and the other end into the connection connector on the FR-PA07 along the guides until

the clips click into place. (For the details of the FR-CB20, refer to the Instruction Manual of the

FR-CB20.)

• To disconnect the cable, hold down the clip at the cable end and gently pull the connector.

Safety precautions

Do not touch the setting dial or keys with wed hands. Doing so may cause an electric shock.

Do not install and operate the enclosure surface operation panel (FR-PA07) if it is damaged

or has parts missing.

Provide a safety backup device, such as an emergency brake, to protect machines and

product from hazardous conditions if the enclosure surface operation panel (FR-PA07)

becomes faulty.

Static electricity in your body must be discharged before you touch the product. Otherwise

the product may be damaged.

If halogens (including fluorine, chlorine, bromine, and iodine) contained in fumigants for wood

packages enter this product, the product may be damaged. Prevent the entry of fumigant

residuals or use an alternative method such as heat disinfection. Note that sterilization or

disinfection of wood packages should be performed before packing the product.

NOTE

Do not start operation with the inverter front cover removed.

Clip

FR-PA07 (back) PU connector

Clip

Example: FR-E700

2. Names and functions of the operation panel

(FR-PA07)

* Both PU and EXT are off on the inverters manufactured during or before the period shown by the serial

numbers described on page 7.

Unit indication

Hz: Lit to indicate frequency.

A: Lit to indicate current.

(Off to indicate voltage and

flicker to indicate set frequency

monitor.)

Rotation direction

indication

On:

Indicates that forward rotation

operation is being performed.

Slow flickering (1.4s cycle):

Reverse rotation operation

Fast flickering (0.2s cycle):

When the forward/reverse

rotation command is given

and the frequency

command is not given.

When the MRS signal is

input.

Start command forward

rotation

Start command reverse

rotation

Monitor (4-digit LED)

Shows the frequency,

parameter number, etc.

Monitor indication

Lit to indicate monitoring mode.

Operation mode indication

PU: Lit to indicate PU operation

mode.

EXT: Lit to indicate external

operation mode.

PU, EXT: Flicker to indicate

network operation mode. *

Setting dial

(Setting dial: Mitsubishi Electric

inverter dial)

Used to change the frequency

setting and parameter values.

Mode switchover

Used to change each setting

mode.

Stop operation

Uses to stop the operation

command.

When a fault occurs, it can be

reset.

Determination of each

setting

If pressed during operation,

monitor changes as below;

Operation mode

switchover

Used to switch between the PU

and external operation mode.

When using the external

operation mode (operation

using a separately connected

frequency setting potentiometer

and start signal), press this key

to light up the EXT indication.

Change Pr. 79 setting to change

to combined mode.)

PU: PU operation mode

EXT: External operation mode

MODE

SET

RUNRUN MONMON

EXTEXT

PUPU

HzHz

STOP

RESET

REV FWD

EXT

Running frequency

Output current

Output voltage

3. Operation

3.1 Basic operation

Basic operation is as follows.

The parameter copy function is not available in this product.

REMARKS

When Pr.551 PU mode operation command source selection = "9999 (initial value)", the

priority of the command source in PU operation mode is defined as follows: USB

connector > FR-PA07 > operation panel. (Whether a USB connector is provided

depends on the inverter model. For details, refer to the Instruction Manual of the

inverter to be used.)

SET

EXT

RUN MON

EXT

RUN MON

EXT

RUN MON

EXT

RUN MON

EXT

MODE

EXT

SET

Operation mode switchover

At power-ON (external operation mode)

PU operation mode

(output frequency monitor)

Monitor/frequency setting

Value change

Output current

monitor

Parameter setting

Parameter setting mode

Fault history

PU Jog operation mode

(Example)

and frequency alternating.

Frequency setting written

and complete

Output voltage

monitor

Display the

current setting

Parameter clear All parameter

clear

Fault history clear

Initial value change list

Value change

Parameter write complete

Parameter and a setting value

alternating.

[Operation for displaying fault history] (Refer to the Instruction Manual of

the inverter.)

The last eight fault records can be displayed. (On the display of the last

fault record, a decimal point LED is ON.)

When the fault history is empty, is displayed.

3.2 Operation lock (Press [MODE] for a while (2 seconds))



Set "10 or 11" in

Pr. 161

, then press for 2 seconds to make the setting dial and key operation

invalid.



When the setting dial and key operation is made invalid, appears on the operation panel.

When the setting dial and key operation is invalid, appears if the setting dial or key

operation is performed. (When the setting dial or key operation is not performed for 2 seconds, the

monitor display appears.)



To make the setting dial and key operation valid again, press for 2 seconds.

Operation using the setting dial and key of the FR-PA07 can be made invalid to

prevent parameter change, and unexpected start or frequency setting.

POINT

Set "10 or 11" (key lock mode valid) in Pr. 161 Frequency setting/key lock operation

selection.

Operation Display

1. Screen at powering on

The monitor display appears.

2. Press to choose the PU operation mode. PU indication is lit.

3. Press to choose the parameter setting

mode. (The parameter number read previously

appears.)

4. Turn until (Pr. 161) appears.

5. Press to read the currently set value.

" " (initial value) appears.

6. Turn to change it to the set value " ".

7. Press to set.

Alternating ... Parameter setting complete

8. Press for 2 seconds to show the monitor

mode.

Press for 2 seconds.

Functions valid even in the

operation lock status

Stop and reset with .

RUNRUN MONMON

EXTEXT

PUPU

HzHz

RUNRUN MONMON

EXTEXT

PUPU

HzHz

RUNRUN MONMON

EXTEXT

PUPU

HzHz

3.3 Use the setting dial like a potentiometer to perform operation

Note

Release the operation lock to release the PU stop by key operation.

POINT

Set "1" (setting dial potentiometer mode) in Pr. 161 Frequency setting/key lock

operation selection.

Changing example Changing the frequency from 0 Hz to 60 Hz during operation

Operation Display

1. Screen at powering on

The monitor display appears.

2. Press to choose the PU operation

mode.

PU indication is lit.

3. Change the Pr. 161 setting to "1".

(Refer to page 4 for change of the setting.)

Press twice to return the monitor to frequency monitor.

4. Press / to start the inverter.

5. Turn until " "(60.00 Hz)

appears. The blinking frequency is the set

frequency.

You need not press . The frequency blinks for about 5s.

REMARKS

If blinking "60.00" turns to "0.00", the Pr. 161 Frequency setting/key lock operation

selection setting may not be "1".

Independently of whether the inverter is running or at a stop, the frequency can be set by

merely turning the . (Use Pr. 295 Magnitude of frequency change setting to change the

frequency setting increments of .)

RUNRUN MONMON

EXTEXT

PUPU

HzHz

RUNRUN MONMON

EXTEXT

PUPU

HzHz

FWD REV

FWD

REV

RUNRUN MONMON

EXTEXT

PUPU

HzHz

4. Specifications

4.1 Standard specifications

* Temperature applicable for a short time, for example, in transit.

4.2 Outline drawing and panel cutting drawing

Item Specifications

Surrounding air

temperature -10°C to +50°C (non-freezing)

Ambient humidity 90%RH or less (non-condensing)

Storage temperature -20°C to +60°C*

Ambience Indoors (free from corrosive gas, flammable gas, oil mist, dust and dirt)

Altitude, vibration Maximum 1000m above sea level for standard operation. 5.9m/s2 or less

at 10 to 55 Hz (directions of X, Y, Z axes)

Power supply Power is supplied from the inverter.

Connection method Connection using the parameter unit connection cable (FR-CB20)

(15.5)

2-M3 screw

(Unit: mm)

5. Instructions



For the FR-E700 series inverters manufactured during or before the period shown by

the following serial numbers, there are restrictions mentioned below.

• Parameter copy ( ) is displayed, but parameter copy (reading, writing, or

verification) does not function. Display turns into the reading indication, but reading is not

executed. If writing or verification is executed, an error occurs.

• Initial value change list ( ) cannot be used.

• Easy setting mode (press and simultaneously (0.5 seconds)) cannot be used

to change the operation mode.

• SERIAL number check

Refer to the Instruction Manual of the inverter for the position of the rating plate.

* The parameter copy menu

()

is not displayed on this product connected to FR-E700 series

inverters manufactured after the above period.



The parameter copy ( ) is not displayed on this product when connected to FR-E800

series inverters.

Rating plate example The SERIAL consists of one symbol, two

characters indicating production year and

month, and six characters indicating control

number.

The last digit of the production year is indicated

as the Year, and the Month is indicated by 1 to

9, X (October), Y (November), or Z (December).

   

Symbol Year Month Control number

SERIAL (Serial No.)

Type SERIAL number Type SERIAL number

FR-E720-0.1K to 0.75K J7 FR-E740-0.4K to 7.5K D7

FR-E720-1.5K to 5.5K K7

FR-E720-7.5K L7

FR-E720-11K, 15K G7

HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN

6. Restricted Use of Hazardous Substances in

Electronic and Electrical Products

The mark of restricted use of hazardous substances in electronic and electrical products is applied

to the product as follows based on the “Management Methods for the Restriction of the Use of

Hazardous Substances in Electrical and Electronic Products” of the People's Republic of China.

电器电子产品有害物质限制使用标识要求

本产品中所含有的有害物质的名称、含量、含有部件如下表所示。

·产品中所含有害物质的名称及含量

上表依据SJ/T11364的规定编制。

○：表示该有害物质在该部件所有均质材料中的含量均在GB/T26572规定的限量要求以下。

×：表示该有害物质在该部件的至少一种均质材料中的含量超出GB/T26572规定的限量要求。

∗1 即使表中记载为 ×，根据产品型号，也可能会有有害物质的含量为限制值以下的情况。

∗2 根据产品型号，一部分部件可能不包含在产品中。

环境保护使用期限标识

部件名称∗2

有害物质∗1

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板组件（

包括印刷电路板及其构成的零部件，

如电阻、电容、集成电路、

连接器等）、电子部件

×○×○ ○ ○

金属壳体、金属部件

×○○○ ○ ○

树脂壳体、树脂部件

○○○○ ○ ○

螺丝、电线

○○○○ ○ ○

IB(NA)-0600350ENG-C (2002)MEE Printed in Japan Specifications subject to change without notice.

Inhaltsverzeichnis

Andere Mitsubishi Electric Wechselrichter Handbücher

Mitsubishi Electric

Mitsubishi Electric FR-A8NCE Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 800 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric fr-e700 series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A520-0.4K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-E500 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric A800-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-D720-0.1K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A7NC E kit-SC Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A862-05450-E Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-F720-00046 Merkblatt

Mitsubishi Electric

Mitsubishi Electric FREQROL HC Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-700PJ Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 800 Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-POL-H400K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-XCG-K Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A500L Series Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-D720-0.4K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A740-00023 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A7NS Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-E540-0.4K-EC Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-CC2 Merkblatt

Mitsubishi Electric

Mitsubishi Electric FR-A5NR Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric FR-A720-0.4K Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 800 Series Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

Astrel Group

Astrel Group Power Reducer Kurzanleitung

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung