Mitsubishi Heavy Industries SRK18YL-S Bedienungsanleitung

Thank you for purchasing a MITSUBISHI HEAVY INDUSTRIES, LTD. Air Conditioner.

To get the best long-lasting performance, read and follow this User’s Manual carefully before using your air-

conditioner.

After reading, please store the Manual in a safe place and refer to it for operational questions or in the

event of any irregularities.

This air-conditioner is intended for domestic use.

Terima kasih Anda telah membeli MITSUBISHI HEAVY INDUSTRIES, LTD. Air Conditioner.

Untuk mendapatkan kinerja unit yang terbaik dan tahan lama, silakan Anda membaca dan mengikuti

Buku Pedoman Pengguna ini secara seksama sebelum menggunakan air-conditioner ini.

Selesai membaca, simpan kembali Buku Pedoman ini di tempat yang aman dan jadikan buku ini

sebagai bahan acuan jika ada yang belum jelas mengenai pengoperasian unit atau jika ada kelainan

pada unit.

Air-conditioner ini hanya diperuntukkan di dalam ruangan.

Terima kasih kerana membeli alat penghawa dingin hasil keluaran daripada Industi Berat Mitsubishi,

Ltd (MITSUBISHI HEAVY INDUSTRIES, LTD).

Bagi mencapai prestasi penghawa dingin yang terbaik dan penggunaan yang berpanjangan, sila baca

dan fahami buku panduan pengguna ini dengan sepenuhnya sebelum menggunakan alat penghawa

dingin ini.

Selepas membaca buku panduan ini, sila letakkan buku panduan ini di tempat yang selamat. Sila

rujuk kepada buku panduan ini jika anda mempunyai apa-apa soalan tentang pengendalian alat ini

ataupun semasa keadaan yang luar biasa.

Alat penghawa dingin ini adalah untuk penggunaan di dalam negara sahaja.

USER’S MANUAL

BUKU PANDUAN PENGGUNA

SRK10YL-S

SRK13YL-S

SRK18YL-S

INSTALLATION DIRECTIONS

PETUNJUK PEMASANGAN

BUKU PEDOMAN

ARAHAN-ARAHAN PEMASANGAN

USER’S MANUAL

INSTALLATION DIRECTIONS

AIR-CONDITIONER

RMA012A031A

AIR-CONDITIONING & REFRIGERATION SYSTEMS

3-1, Asahi, Nishibiwajima-cho, Kiyosu, Aichi, 452-8561, Japan

http://www.mhi.co.jp

MITSUBISHI HEAVY INDUSTRIES - MAHAJAK AIR CONDITIONERS CO., LTD.

220 Lad Krabang Industrial Estate Free Zone 3, Soi Chalongkrung 31,

Kwang Lamplatiew, Khet Lad Krabang, Bangkok 10520, Thailand

Tel:+66-2-326-0401

Fax : +66-2-326-0419

http ://www.maco.co.th/

MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONERS AUSTRALIA, PTY. LTD.

9C Commercial Road Kingsgrove NSW 2208 PO BOX 318 Kingsgrove NSW 1480

Tel:+61-2-8571-7977

Fax : +61-2-8571-7992

http://www.mhiaa.com.au

–1–

contents

Safety precautions ....................................................................................................................... 2

Choice of operations and features ...............................................................................................4

Name of each part and its function ............................................................................................. 5

Operation and indication section for remote control .................................................................. 7

AUTO mode operation procedure .............................................................................................. 8

Temperature adjustment during AUTO ...................................................................................... 8

About FAN SPEED ..................................................................................................................... 8

COOL/DRY/FAN mode operation procedure ............................................................................ 9

Air-conditioner operating conditions .......................................................................................... 9

Air flow direction adjustment procedure .................................................................................. 10

3D AUTO operation procedure ................................................................................................ 10

SLEEP operation procedure ...................................................................................................... 11

OFF-TIMER operation procedure ............................................................................................ 11

ON-TIMER operation procedure .............................................................................................. 12

SLEEP operation + ON-TIMER operation procedure ............................................................. 12

PROGRAM TIMER operation procedure ................................................................................ 13

Present time setting procedure ..................................................................................................13

HIGH POWER/ECONOMY operation procedure ................................................................... 14

Concerning CLEAN operation ................................................................................................. 15

Emergency run operation .......................................................................................................... 15

Power blackout auto restart function ........................................................................................ 15

Installation location setting ....................................................................................................... 16

Remote control handling procedure .......................................................................................... 17

When the operation fails with the remote control .................................................................... 17

Operating hints .......................................................................................................................... 18

Maintenance .............................................................................................................................. 18

Has the unit been installed correctly? ....................................................................................... 20

Troubleshooting ........................................................................................................................ 20

Please remember! ...................................................................................................................... 21

When to contact your distributor without delay ....................................................................... 22

Self diagnosis function .............................................................................................................. 23

USER’S MANUAL

–2–

Safety precautions

•Before starting to use the system, please read these “Safety precautions” carefully to ensure proper operation of the system.

•The safety precautions are classified as “ DANGER” and “ CAUTION”. Precautions as shown in the column “ DANGER” indicate

that improper handling could lead to drastic result like death, serious injury, etc. Even precautions as shown in the column “ CAUTION”

might pose a serious problem, depending on the circumstances. Please observe these precautions with great care, since they are essential to your

safety.

•Symbols which appear frequently in the text have the following meaning:

•When you have read this instruction manual, please keep it without missing. If someone else takes over as operator, make certain that the manual

is also passed on to the new operator.

Strictly prohibited Provide proper earthing

Observe instructions with

great care

❚INSTALLATION PRECAUTIONS

Make sure that the system has been

properly earthed.

Depending on the place of installa-

tion, an earth leakage breaker may

be necessary.

Do not install it where flammable gas

may leak.

Make sure to install the drain hose

properly so that all the water is

drained out.

The system is for domestic, residential

etc. use.

The system must be installed by your

dealer or a qualified professional.

If used in severer environments,

such as an engineering workplace,

the equipment may function poorly.

It is not advisable to install the sys-

tem by yourself, as faulty handling

may cause leakage of water, electric

shock or fire.

Gas leaks may cause fire. If you do not install an earth leak-

age breaker, you may get an elec-

tric shock.

Improper installation may lead to

water drop in the room resulting

in wet furniture.

Earth cables should never be

connected to a gas pipe, water

pipe, lightning conductor or tel-

ephone earth cable. Incorrect in-

stallation of the earth cable may

produce an electric shock.

CAUTIONDANGER

❚OPERATION PRECAUTIONS

Do not expose yourself to the cooling

air for a long period.

Do not insert anything into the air inlet.

DANGER

The appliance is not intended for use by

persons (including children) with reduced

physical,sensory or mental capabilities,

or lack of experience and knowledge, un-

less they have been given supervision or

instruction concerning use of the appli-

ance by a person responsible for their

safety.

Store the remote control out of reach of

infants.

This could affect your physical

condition and cause health prob-

lems.

Do not place a flammable insecticide

or paint spray near the blower, nor

spray it directly on the system.

Do not handle the switches with wet

hands.

Only use approved fuses.

Do not swing from the indoor unit.

This may cause injury, as the in-

ternal fan rotates at high speed.

Use of steel or copper wire in-

stead of an approved fuse is

strictly prohibited, as it may

cause a breakdown or fire.

This may cause an electric

shock.

If the indoor unit falls down,

you may get injured.

This may result in a fire.

CAUTION

Do not wash the air-conditioner with

water.

You should not expose any combus-

tion appliance directly to the air

stream of the air-conditioner.

Children should be supervised to

ensure that they do not play with

the appliance.

The appliance may then work

inadequately.

This could cause an electric

shock.

Do not place anything containing wa-

ter, like vases, on top of the unit.

The system should only be used for its origi-

nal purpose and not for anything else like,

for instance, preservation of food, plants or

animals, precision devices or works of art.

Failure to observe this may re-

sult in the batteries being swal-

lowed or other accidents.

The system is only intended

for use in ordinary domestic

rooms. Any other use of the

system may damage the qual-

ity of food, etc.

Water entering the unit could

damage the insulation and there-

fore cause an electric shock.

–3–

❚Safety precautions

CAUTION

❚PRECAUTIONS FOR RELOCATION OR REPAIRS

DANGER

Do not operate the system without

the air filter.

When you clean the system, stop the

unit and turn off the power supply.

Do not install the system where the air-

flow direction is aimed directly at

plants or animals.

Do not sit on the outdoor unit nor put

anything on it.

After a long period of use, check the

unit's support structure from time to

time.

Do not place household electrical ap-

pliances or household items under

neath the indoor or outdoor units.

Stand firmly on a stepladder or other

stable object when removing the inlet

panel and filters.

Do not touch the aluminum fins on the

air heat exchanger.

Do not place objects near the out-

door unit or allow leaves to gather

around the unit.

Contact your dealer to clean inside the

indoor unit, do not attempt to do by

yourself.

This will damage their health. If the unit falls down or things

drop off it, people could get hurt.

If you do not repair any damage

right away, the unit may fall

down and cause personal injury.

It may result in injury. Condensation falling from the

unit may stain objects and cause

accidents or electrical shock.

It can cause malfunction of the

system due to clogging of the

heat exchanger.

Failure to observe this may result

in injury through insecure objects

toppling over.

Never open the panel while the

internal fan is rotating.

If there are objects or leaves

around the outdoor unit, small

animals may enter unit and con-

tact electrical parts and may

cause a break-down, smoke or

fire.

The use of a non-approved deter-

gent or improper washing method

may damage the unit’s plastic com-

ponents and cause leaks. Damage,

smoke, or fire may also happen if

the detergent comes in contact with

electrical parts or the unit’s motor.

Consult your dealer for repairs.

If you notice anything abnormal (smell of

burning, etc.), stop the system, turn off

the power supply and consult your

dealer.

In case the air-conditioner is relo-

cated elsewhere, contact your dealer

or a professional fitter.

If the air-conditioner fails to cool or warm the room, it may have a refrigerant

leakage. Contact your dealer.

If refrigerant needs to be added, check with your dealer for proper instruc-

tions.

Wrong repairs could cause an

electric shock, fire, etc.

Faulty installation may cause wa-

ter leakage, electric shock, fire,

etc.

Continued use of the system in ab-

normal circumstances may result

in malfunctioning, electric shock,

fire, etc.

If the refrigerant comes in contact with the bare skin, it may cause cold injury.

If the refrigerant gas is inhaled excessively, it may cause deterioration of nerve function

like dizziness and headache, or deterioration of heart function like irregular heartbeat and

heart palpitation temporarily. If refrigerant unexpectedly leaks from the unit onto a fan

heater, stove, hotplate or other heat source, harmful gases could be generated.

If you operate the system together

with a combustion appliance, you

must regularly ventilate the indoor air.

Do not control the system with main

power switch.

It can cause fire or water leakage.

In addition, the fan can start un-

expectedly, which can cause per-

sonal injury.

Insufficient ventilation may

cause accidents due to oxygen

deficiency.

Do not shut off the power supply imme-

diately after stopping the operation.

Wait at least 5 minutes, otherwise

there is a risk of water leakage or

breakdown.

Do not perform any repairs or modifica-

tions by yourself. Consult the dealer if

the unit requires repair.

If you repair or modify the unit, it

can cause water leaks, electric

shocks or fire.

Stop the unit and turn off the power

if you hear thunder or there is a

danger of lightning.

It may damage the unit.

–4–

Choice of operations

Features

Page 9

Drying by extracting damp from the room.

Page 9

Cooling by extracting heat from the room.

COOL DRY

Functioning of microcomputer depends on setting and room tem-

peratures. It dehumidifies while keeping room temperature almost

constant.

Page 8

Automatic selection of operating mode.

Page 9

Fanning by circulating room air.

The Auto mode automatically

selects the operation mode

(COOL or DRY), depending

on the room temperature

when switched on.

AUTOFAN

Page 10

Page 11, 12

There are three timers, for SLEEP, ON and

OFF. They can be set as desired.

Page 13

When using the timer to switch on, the sys-

tem should become operational shortly be-

fore the set time, depending on the room

temperature so that the desired temperature

should be reached at the set time.

Amenity facility

TIMER procedure

•SWING FLAP

Flap moves up and down continuously.

•SWING LOUVER

Louver moves left and right continuously.

•MEMORY FLAP (FLAP OR LOUVER STOPPED)

Once the flap or louver position has been set, the

unit will memorise it and continue in the same posi-

tion the next time.

Adjustment of

airflow

Page 14

Turning up the power operates the air-con-

ditioner in the power cooling mode.

HIGH POWER mode

Page 14

This is an economic level of operation.

ECONOMY mode

Choice of operations and features

–5–

Name of each part and its function

INDOOR UNIT

Draws in the indoor air.

Removes dust or dirt from the inlet air.

Page 18

Drains water from the dehumidified air.

Page 10

Air blows out of here.

Accesso

ies

Wireless remote control

Battery (R03

×2)

Wood

screw (Quantity:2)

(for remote control holder mounting)

Wireless remote

control holder

Air inlet panel

Unit indication section and remote control signal receiver

Air-cleaning filter

Air filter

Wireless remote control

Drain hose

Left/right air flow adjustment louver

Up/down air flow direction adjustment flap

Air outlet

Unit operation switch

Room temperature detector

Refrigerant piping connection electric flex

Air outlet

Outdoor unit fan

Heat exchanger

Air inlet

(On side & rear surface)

Photocatalytic washable

deodorizing filter (Orange)

Natural enzyme filter

(Green)

–6–

Unit indication section

How to open the air inlet panel

Push both sides evenly and press further lightly at the center.

Place fingers at the recesses on both sides of the panel and pull up the panel

to this side so that it will be opened by about 60 degrees.

Unit ON/OFF button

Secure either the upper or lower edge of the air inlet panel by lightly pushing it

in, and then close the panel.

When removing the air inlet panel for internal cleaning or others, open the

panel by 80 degrees and then pull it to this side.

In emergencies, this button can be used for turning on/off the unit when

remote control is not available. Page 15

Removal, installation of air inlet panel

3D AUTO light (green)

Illuminates during 3D AUTO operation.

HI POWER light (green)

Illuminates during HIGH POWER operation.

RUN light (green)

Illuminates during operation

and CLEAN operation.

TIMER light (yellow)

Illuminates during TIMER operation.

Unit ON/OFF button

How to close the air inlet panel

–7–

Operation and indication section for remote control

Operation section

FAN SPEED button

Each time the button is pushed, the

indicator is switched over in turn.

•The above illustration shows all controls, but in practice

only the relevant parts are shown.

OPERATION MODE select button

Each time the button pushed, the

indicator is switched over in turn.

ON/OFF (luminous) button

Press for starting operation, press again

for stopping.

HI POWER/ECONO button

This button changes the HIGH POWER/

ECONOMY mode.

Page 14 AIR FLOW (UP/DOWN) button

This button changes the air flow (up/down) mode.

This button changes the air flow (left/right) mode.

Page 10

SLEEP button

This button changes to SLEEP operation.

Page 11

CLEAN switch

This switch changes the CLEAN mode.

Page 15

ON TIMER button

This button selects ON TIMER operation.

Page 12

AIR FLOW (LEFT/RIGHT) button

Page 10

3D AUTO button

This button sets 3D AUTO operation.

This button cancels the ON timer, OFF

timer, and SLEEP operation.

CANCEL button

RESET switch

Switch for resetting microcomputer and

setting time. Page 13, 17

Indication section

SLEEP indicator

Indicates during SLEEP operation.

TEMPERATURE indicator

Indicates set temperature.

(Does not indicate temperature when operation

mode is on AUTO)

FAN SPEED indicator

Indicates set air flow rate with lamp.

CLEAN indicator

Indicates during CLEAN operation.

ON/OFF TIMER indicator

Indicates during ON/OFF TIMER operation.

AIR FLOW indicator

Shows selected flap and louver mode.

3D AUTO indicator

Indicates during 3D AUTO operation.

HI POWER/ECONO MODE indicator

Indicates during HIGH POWER/ECONOMY

mode operation.

Transmission procedure

When each button on the remote control is pressed with the remote control pointing towards the air-conditioner unit a signal is transmitted.

When the air-conditioner receives the signal correctly, it will beep.

[

OPERATION MODE indicator

Indicates selected operation with lamp.

(Auto)

•

(Cool)

•

(Fan)

•

(Dry)]

OFF TIMER button

This button selects OFF TIMER operation.

Page 11

TEMPERATURE button

This button sets the room temperature.

(This button changes the present time and

TIMER time.)

TIME indicator

Indicates present time or timer setting time.

Page 10

–8–

■Each time the button is pressed, the switch over occurs in the following order

–6 →–5 →............ –1 →±0 →+1 ............ +6.

When +6 is indicated, even if the button is pressed, the indicator does not change.

■Each time the button is pressed, the switch over occurs in the following order

+6 →+5 →............ +1 →±0 →–1 ............ –6.

When –6 is indicated, even if the button is pressed, the indicator does not change.

About FAN SPEED

■You can choose the capacity of your air-conditioner when cooling or fan.

Temperature adjustment during AUTO

■

Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button.

AUTO mode operation procedure

■Automatically selects the operation mode (COOL, DRY) depending on the room temperature when switched on.

Air flow direction adjustment proce-

dure. Page 10

When a change in temperature is desired.

Press the or button.

•Air is not blown out during the opera-

tion.

Page 21

•If you don’t want the AUTO mode program, change

to COOL, DRY or FAN instead of AUTO.

Page 9

AUTO mode can be oper-

ated by simply pressing

the ON/OFF button.

To stop: Press the ON/OFF button.

When the unit is not in AUTO mode:

Press MODE button.

Move the [ mark] to the (Auto) position.

Aim the remote control at the air-conditioner.

Press the ON/OFF button.

When it is a little cold

Press the button.

When it is a little hot

Press the button.

Press the FAN SPEED button.

Move the [ mark] to the desirable fan speed position.

Operation capacity by your choice FAN SPEED

Set automatically by microcomputer AUTO

Powerful operation with high capacity HI

Standard operation MED

Energy-saving operation LO

AUTO HI MED LO

NOTE

–9–

COOL/DRY/FAN mode operation procedure

Air flow direction adjustment procedure. Page 10

Program changing procedure

Set the new program.

•The operation program can also be set or changed when

the air-conditioner is not in operation.

Aim the remote control at the air-conditioner.

Press the MODE select button.

Move the [ mark] to the desirable operation position.

(Cool), (Fan), (Dry)

Press the ON/OFF button.

Press the TEMP button.

Press or button for the desired temperature.

Standard

To stop: Press the ON/OFF button.

•Air is not blown out during the operation.

Page 21

NOTE

Air-conditioner operating conditions

■Use within the following operational range. Operating outside of this range may result in the protection devices being activated, preventing

the unit from working.

Cooling operation

Outside temperature Approximately 21 to 43 °C

Inside temperature Approximately 21 to 32 °C

Below approximately 80%

The long-term use of the unit with a humidity level exceeding 80% may result in condensation forming on the

surface of the indoor unit, leading to water drips.

Press the FAN SPEED button

Set the fan speed as desired.

Inside humidity

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Heavy Industries Klimaanlage Handbücher

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZM-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK25ZJX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20HG Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK10CRS-S3 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20HD Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries KXZ Series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDT71VNXVD Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries 100 VNX-W Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZIX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZG-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTCVA402HESP2R Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK25QA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20MA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK63ZR-WF Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK63ZMA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK24YRA-W Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTVA402HEN1R Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK25GZ-L1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZD-S1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDC112KXEN6 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZMA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries 25ZMX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries DXK06ZSA-W Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK35ZJX-S Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung