Mitsubishi Heavy Industries SRK20ZG-S Bedienungsanleitung

INVERTER WALL MOUNTED TYPE

ROOM AIR-CONDITIONER

( Split system, air to air heat pump type )

SRK20ZG-S, SRK25ZG-S, SRK35ZG-S, SRK50ZG-S

Manual No. ’06

SRK-T

060

CONTENTS

1 GENERAL INFORMATION.................................................................... 1

1.1 Specific features............................................................................ 1

1.2 How to read the model name ....................................................... 1

2 SELECTION DATA ................................................................................ 2

2.1 Specifications ................................................................................ 2

2.2 Range of usage & limitations ....................................................... 6

2.3 Exterior dimensions ...................................................................... 6

2.4 Piping system ................................................................................ 8

2.5 Selection chart .............................................................................. 9

3 ELECTRICAL DATA .............................................................................. 10

3.1 Electrical wiring ............................................................................. 10

4 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER ......... 12

4.1 Operation control function by remote control switch................ 12

4.2 Unit ON/OFF button....................................................................... 13

4.3 Power blackout auto restart function .......................................... 13

4.4 Custom cord switching procedure .............................................. 13

4.5 Flap and louver control................................................................. 14

4.6 3D auto operation .......................................................................... 15

4.7 Timer operation ............................................................................. 16

4.8 Installation location setting .......................................................... 16

4.9 Outline of heating operation ........................................................ 17

4.10 Outline of cooling operation ........................................................ 18

4.11 Outline of automatic operation .................................................... 18

4.12 Protective control function........................................................... 19

5 APPLICATION DATA ............................................................................. 24

5.1 Selection of location for installation ........................................... 25

5.2 Installation of indoor unit ............................................................. 26

5.3 Installation of outdoor unit ........................................................... 29

5.4 Connection of refrigerant pipings ............................................... 29

5.5 Test run .......................................................................................... 31

5.6 Precautions for wireless remote control installation and

operation ........................................................................................ 31

6 MAINTENANCE DATA .......................................................................... 32

6.1 Troubleshooting procedures for electrical equipment .............. 32

6.2 Servicing ........................................................................................ 51

7 INTERFACE KIT (OPTIONAL PARTS).................................................. 52

7.1 Applicable model........................................................................... 52

7.2 List of connectable devices ......................................................... 52

7.3 Exterior dimensions ...................................................................... 52

7.4 Circuit board component layout .................................................. 52

7.5 System configuration.................................................................... 53

7.6 Installation of interface kit ............................................................ 54

7.7 Wired remote control .................................................................... 59

7.8 Insatallation of wired remote control .......................................... 60

7.9 Setting functions using the wired remote control ..................... 61

7.10 Super link adapter ......................................................................... 65

7.11 Operation permission/prohibition control .................................. 67

7.12 External control (remote display) /control of input signal......... 68

8 REFRIGERANT PIPING INSTALLATION / SERVICING MANUAL

FOR AIR CONDITIONERS USING R410A........................................... 69

8.1 Outline ............................................................................................ 69

8.2 Refrigerant piping installation ..................................................... 70

8.3 Installation, removal and servicing.............................................. 76

8.4 Refrigerant recovery ..................................................................... 81

Over heat of compressor

Error of signal transmission

Outdoor fan motor error

1 GENERAL INFORMATION

1.1 Specific features

The “MITSUBISHI HEAVY INDUSTRIES, LTD” room air-conditioner: SRK series are of split and wall mounted type and the unit

consists of indoor unit and outdoor unit with refrigerant precharged in factory. The indoor unit is composed of room air cooling or

heating equipment with operation control switch and the outdoor unit is composed of condensing unit with compressor.

(1) Inverter (Frequency converter) for multi-steps power control

¡Heating/Cooling

The rotational speed of a compressor is changed in step in relation to varying load, interlocked with the indoor and outdoor unit

fans controlled to change frequency, thus controlling the capacity.

¡Allowing quick heating/cooling operation during start-up period. Constant room temperature by fine-tuned control after the unit

has stabilized.

(2) Fuzzy control

¡Fuzzy control calculates the amount of variation in the difference between the return air temperature and the setting temperature

in compliance with the fuzzy rules in order to control the air capacity and the inverter frequency.

(3) Remote control flap & louver

The flap & louver can be automatically controlled by operating wireless remote control.

¡Flap swing : The flaps swing up and down successively.

¡Louver swing : The louvers swing left and right successively.

¡3D auto operation : Fan speed and air flow direction are automatically controlled, allowing the entire room to be efficiently

conditioned.

¡Memory flap : Once the flap & louver position is set, the unit memorizes the position and continues to operate at the

same position from the next time.

(4) Self diagnosis function

¡We are constantly trying to do better service to our customers by installing such judges that show abnormality of operation as

follows.

Outdoor heat exchanger liquid

pipe sensor error

Discharge pipe sensor error

Outdoor temperature sensor error

2 time flash

4 time flash

RUN light

keeps flashing

1 time flash

Trouble of outdoor unit

Over current

Current cut

2 time flash

3 time flash

RUN light

1 time flash

5 time flash

TIMER light

R410A models

Series No.

Inverter type

Product capacity

Wall mounted type

Split type room air-conditioner

1.2 How to read the model name

Example : SR K 35 Z G - S

Room temperature sensor error

Indoor fan motor error

Heat exchanger sensor error

2 time flash

6 time flash

TIMER light

1 time flash

RUN light

Rotor lock

6 time flash

7 time flash

2 time flash

RUN light

2 time flash

4 time flash Power transistor error

Item

Model SRK20ZG-S SRC20ZG-S

Cooling capacity(1) W 2000 (500~2800)

Heating capacity(1) W 2700 (500~4600)

Power source 1 Phase, 220-240V, 50Hz

Cooling input kW 0.44 (0.1~0.91)

Running current (Cooling) A 2.4/2.3/2.2

Heating input kW 0.62 (0.09~1.27)

Running current (Heating) A 3.0/2.9/2.8

Inrush current A 3.0/2.9/2.8

COP Cooling: 4.55 Heating: 4.35

Cooling Sound level Hi 35, Me 29, Lo 21 44

Noise level Power level dB 51 58

Heating Sound level Hi 35, Me 32, Lo 25 45

Power level 53 59

Exterior dimensions

Height ×Width ×Depth mm 268 ×790 ×199 540 ×780 ×290

Color Fine snow Stucco white

Net weight kg 8.5 35

Refrigerant equipment

Compressor type & Q’ty –RM-B5077MD1 (Rotary type) ×1

Motor kW –0.75

Starting method – Line starting

Heat exchanger Louver fins & inner grooved tubing Straight fins & inner grooved tubing

Refrigerant control Capillary tubes + Electronic expansion valve

Refrigerant(3) kg R410A 0.9 (Pre-Charged up to the piping length of 15m)

Refrigerant oil R0.35 (MA68)

Deice control Microcomputer control

Air handling equipment

Fan type & Q’ty Tangential fan ×1 Propeller fan ×1

Motor W 38 24

(Cooling) 7.4 30

Air flow (at High) (Heating) CMM 8.5 23

Air filter, Q’ty Polypropylene net (washable) ×2–

Shock & vibration absorber – Cushion rubber (for compressor)

Electric heater ––

Operation control

Operation switch Wireless-Remote control –

Room temperature control Microcomputer thermostat –

Pilot lamp RUN (Green), TIMER (Yellow), HI POWER (Green), 3D AUTO (Green)

Safety equipment

O.D mm (in) Liquid line: φ6.35 (1/4″) Gas line: φ9.52 (3/8″)

Connecting method Flare connecting

Attached length of piping Liquid line: 0.4 m

Gas line : 0.33 m –

Insulation Necessary (Both sides)

Drain hose Connectable

Power source cord 2 m (3 cores with Earth)

Size ×Core number 1.5 mm2×4 cores (Including earth cable)

Connection wiring Connecting method Terminal block (Screw fixing type)

Accessories (included)

Mounting kit, Clean filter (Allergen clear filter x1, Photocatalytic washable deodorizing filter x1)

Optional parts Interface kit

Notes (1) The data are measured at the following conditions.

2 SELECTION DATA

2.1 Specifications

Model SRK20ZG-S (Indoor unit)

SRC20ZG-S (Outdoor unit)

Item Indoor air temperature Outdoor air temperature Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612

Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

(2) The operation data are applied to the 220/230/240V districts respectively.

(3) The refrigerant quantity to be charged includes the refrigerant in 15 m connecting piping.

(Purging is not required even for the short piping.)

(4) If the interface kit (SC-BIK-E) (sold separately) is connected to the terminals on the indoor unit’s circuit board, a wired remote control (sold separately)

can be connected, a Super Link can be connected, and the unit can be turned on and off from a CNT terminal.

Operation data

(1)

Refrigerant

piping

Compressor overheat protection, Heating overload protection (High pressure control), Overcurrent protection,

Frost protection, Serial signal error protection, Indoor fan motor error protection, Cooling overload protection

The piping length is 7.5m.

(220/230/240V)

Item

Model SRK25ZG-S SRC25ZG-S

Cooling capacity(1) W 2500 (500~3000)

Heating capacity(1) W 3400 (500~4800)

Power source 1 Phase, 220-240V, 50Hz

Cooling input kW 0.62 (0.1~0.97)

Running current (Cooling) A 3.1/3.0/2.9

Heating input kW 0.93 (0.09~1.30)

Running current (Heating) A 4.5/4.3/4.1

Inrush current A 4.5/4.3/4.1

COP Cooling: 4.03 Heating: 3.66

Cooling Sound level Hi 36, Me 30, Lo 22 44

Noise level Power level dB 52 58

Heating Sound level Hi 36, Me 33, Lo 26 47

Power level 54 62

Exterior dimensions

Height ×Width ×Depth mm 268 ×790 ×199 540 ×780 ×290

Color Fine snow Stucco white

Net weight kg 8.5 35

Refrigerant equipment

Compressor type & Q’ty –RM-B5077MD1 (Rotary type) ×1

Motor kW –0.75

Starting method – Line starting

Heat exchanger Louver fins & inner grooved tubing Straight fins & inner grooved tubing

Refrigerant control Capillary tubes + Electronic expansion valve

Refrigerant(3) kg R410A 0.9 (Pre-Charged up to the piping length of 15m)

Refrigerant oil R0.35 (MA68)

Deice control Microcomputer control

Air handling equipment

Fan type & Q’ty Tangential fan ×1 Propeller fan ×1

Motor W 38 24

(Cooling) 7.6 30

Air flow (at High) (Heating) CMM 8.7 23

Air filter, Q’ty Polypropylene net (washable) ×2–

Shock & vibration absorber – Cushion rubber (for compressor)

Electric heater ––

Operation control

Operation switch Wireless-Remote control –

Room temperature control Microcomputer thermostat –

Pilot lamp RUN (Green), TIMER (Yellow), HI POWER (Green), 3D AUTO (Green)

Safety equipment

O.D mm (in) Liquid line: φ6.35 (1/4″) Gas line: φ9.52 (3/8″)

Connecting method Flare connecting

Attached length of piping Liquid line: 0.4 m

Gas line : 0.33 m –

Insulation Necessary (Both sides)

Drain hose Connectable

Power source cord 2 m (3 cores with Earth)

Size ×Core number 1.5 mm2×4 cores (Including earth cable)

Connection wiring Connecting method Terminal block (Screw fixing type)

Accessories (included)

Mounting kit, Clean filter (Allergen clear filter x1, Photocatalytic washable deodorizing filter x1)

Optional parts Interface kit

Notes (1) The data are measured at the following conditions.

Model SRK25ZG-S (Indoor unit)

SRC25ZG-S (Outdoor unit)

Item Indoor air temperature Outdoor air temperature Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612

Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

(2) The operation data are applied to the 220/230/240V districts respectively.

(3) The refrigerant quantity to be charged includes the refrigerant in 15 m connecting piping.

(Purging is not required even for the short piping.)

(4) If the interface kit (SC-BIK-E) (sold separately) is connected to the terminals on the indoor unit’s circuit board, a wired remote control (sold separately)

can be connected, a Super Link can be connected, and the unit can be turned on and off from a CNT terminal.

Operation data

(1)

Refrigerant

piping

Compressor overheat protection, Heating overload protection (High pressure control), Overcurrent protection,

Frost protection, Serial signal error protection, Indoor fan motor error protection, Cooling overload protection

The piping length is 7.5m.

(220/230/240V)

Item

Model SRK35ZG-S SRC35ZG-S

Cooling capacity(1) W 3500 (500~3900)

Heating capacity(1) W 4200 (500~5100)

Power source 1 Phase, 220-240V, 50Hz

Cooling input kW 1.05 (0.1~1.22)

Running current (Cooling) A 4.9/4.7/4.5

Heating input kW 1.14 (0.09~1.32)

Running current (Heating) A 5.3/5.1/4.9

Inrush current A 5.3/5.1/4.9

COP Cooling: 3.33 Heating: 3.68

Cooling Sound level Hi 40, Me 32, Lo 23 48

Noise level Power level dB 56 62

Heating Sound level Hi 41, Me 36, Lo 27 50

Power level 59 64

Exterior dimensions

Height ×Width ×Depth mm 268 ×790 ×199 540 ×780 ×290

Color Fine snow Stucco white

Net weight kg 8.5 38

Refrigerant equipment

Compressor type & Q’ty –RM-B5077MD1 [Rotary type] ×1

Motor kW –0.90

Starting method – Line starting

Heat exchanger Louver fins & inner grooved tubing Straight fins & inner grooved tubing

Refrigerant control Capillary tubes + Electronic expansion valve

Refrigerant(3) kg R410A 1.1 (Pre-Charged up to the piping length of 15m)

Refrigerant oil R0.35 (MA68)

Deice control Microcomputer control

Air handling equipment

Fan type & Q’ty Tangential fan ×1 Propeller fan ×1

Motor W 38 24

(Cooling) 8.5 30

Air flow (at High) (Heating) CMM 10.8 33

Air filter, Q’ty

Polypropylene net (washable)

–

Shock & vibration absorber – Cushion rubber (for compressor)

Electric heater ––

Operation control

Operation switch Wireless-Remote control –

Room temperature control Microcomputer thermostat –

Pilot lamp RUN (Green), TIMER (Yellow), HI POWER (Green), 3D AUTO (Green)

Safety equipment

O.D mm (in) Liquid line: φ6.35 (1/4″) Gas line: φ9.52 (3/8″)

Connecting method Flare connecting

Attached length of piping Liquid line: 0.4 m

Gas line : 0.33 m –

Insulation Necessary (Both sides)

Drain hose Connectable

Power source cord 2 m (3 cores with Earth)

Size ×Core number 1.5 mm2×4 cores (Including earth cable)

Connection wiring Connecting method Terminal block (Screw fixing type)

Accessories (included)

Mounting kit, Clean filter (Allergen clear filter x1, Photocatalytic washable deodorizing filter x1)

Optional parts Interface kit

Notes (1) The data are measured at the following conditions.

Model SRK35ZG-S (Indoor unit)

SRC35ZG-S (Outdoor unit)

Item Indoor air temperature Outdoor air temperature Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612

Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

(2) The operation data are applied to the 220/230/240V districts respectively.

(3) The refrigerant quantity to be charged includes the refrigerant in 15 m connecting piping.

(Purging is not required even for the short piping.)

(4) If the interface kit (SC-BIK-E) (sold separately) is connected to the terminals on the indoor unit’s circuit board, a wired remote control (sold

separately) can be connected, a Super Link can be connected, and the unit can be turned on and off from a CNT terminal.

Operation data

(1)

Refrigerant

piping

Compressor overheat protection, Heating overload protection (High pressure control), Overcurrent protection,

Frost protection, Serial signal error protection, Indoor fan motor error protection, Cooling overload protection

The piping length is 7.5m.

(220/230/240V)

Model SRK50ZG-S (Indoor unit)

SRC50ZG-S (Outdoor unit)

Item

Model SRK50ZG-S SRC50ZG-S

Cooling capacity(1) W 5000 (600~5300)

Heating capacity(1) W 5800 (600~7900)

Power source 1 Phase, 220-240V, 50Hz

Cooling input kW 1.66 (0.12~2.1)

Running current (Cooling) A 7.6/7.3/7.0

Heating input kW 1.70 (0.11~2.71)

Running current (Heating) A 7.9/7.5/7.2

Inrush current A 7.9/7.5/7.2

COP Cooling: 3.01 Heating: 3.41

Cooling Sound level Hi 47, Me 42, Lo 26 48

Noise level Power level dB 61 61

Heating Sound level Hi 48, Me 40, Lo 34 50

Power level 62 64

Exterior dimensions

Height ×Width ×Depth mm 268 ×790 ×199 640 ×850 ×290

Color Fine snow Stucco white

Net weight kg 8.5 43

Refrigerant equipment

Compressor type & Q’ty –5CS102XFA [Scroll type] ×1

Motor kW –1.5

Starting method – Line starting

Heat exchanger Slit fins + Louver fins & inner grooved tubing Straight fins & inner grooved tubing

Refrigerant control Capillary tubes + Electronic expansion valve

Refrigerant(3) kg R410A 1.35 (Pre-Charged up to the piping length of 15m)

Refrigerant oil R0.36 (RB68A)

Deice control Microcomputer control

Air handling equipment

Fan type & Q’ty Tangential fan ×1 Propeller fan ×1

Motor W 38 34

(Cooling) 11.5 42

Air flow (at High) (Heating) CMM 13.0 42

Air filter, Q’ty

Polypropylene net (washable)

–

Shock & vibration absorber – Cushion rubber (for compressor)

Electric heater ––

Operation control

Operation switch Wireless-Remote control –

Room temperature control Microcomputer thermostat –

Pilot lamp RUN (Green), TIMER (Yellow), HI POWER (Green), 3D AUTO (Green)

Safety equipment

O.D mm (in) Liquid line: φ6.35 (1/4″) Gas line: φ12.7 (1/2″)

Connecting method Flare connecting

Attached length of piping Liquid line: 0.4 m

Gas line : 0.33 m –

Insulation Necessary (Both sides)

Drain hose Connectable

Power source cord 2 m (3 cores with Earth)

Size ×Core number 1.5 mm2×4 cores (Including earth cable)

Connection wiring Connecting method Terminal block (Screw fixing type)

Accessories (included)

Mounting kit, Clean filter (Allergen clear filter x1, Photocatalytic washable deodorizing filter x1)

Optional parts Interface kit

Notes (1) The data are measured at the following conditions.

Item Indoor air temperature Outdoor air temperature Standards

Operation DB WB DB WB

Cooling 27ºC 19ºC 35ºC 24ºC ISO-T1, JIS C9612

Heating 20ºC – 7ºC 6ºC ISO-T1, JIS C9612

(2) The operation data are applied to the 220/230/240V districts respectively.

(3) The refrigerant quantity to be charged includes the refrigerant in 15 m connecting piping.

(Purging is not required even for the short piping.)

If the piping length is longer, when it is 15 to 25m, add 20 g refrigerant per meter.

(4) If the interface kit (SC-BIK-E) (sold separately) is connected to the terminals on the indoor unit’s circuit board, a wired remote control (sold

separately) can be connected, a Super Link can be connected, and the unit can be turned on and off from a CNT terminal.

Operation data

(1)

Refrigerant

piping

Compressor overheat protection, Heating overload protection (High pressure control), Overcurrent protection,

Frost protection, Serial signal error protection, Indoor fan motor error protection, Cooling overload protection

The piping length is 7.5m.

(220/230/240V)

2.2 Range of usage & limitations

2.3 Exterior dimensions

(1) Indoor unit

Models SRK20ZG-S, 25ZG-S, 35ZG-S, 50ZG-S

Indoor return air temperature

(Upper, lower limits)

Refrigerant line (one way) length Max. 15m

SRK20ZG-S, 25ZG-S, 35ZG-S SRK50ZG-S

Cooling operation : Approximately 18 to 32˚C

Heating operation : Approximately 15 to 30˚C

Cooling operation : Approximately -15 to 46˚C

Heating operation : Approximately -15 to 21˚C

Power source voltage Rating ±10%

Voltage at starting Min. 85% of rating

Frequency of ON-OFF cycle Max. 7 times/h

(Inching prevention 5 minutes)

Max. 4 times/h

(Inching prevention 10 minutes)

ON and OFF interval Max. 3 minutes

Outdoor air temperature

(Upper, lower limits)

Vertical height difference between

outdoor unit and indoor unit

Max. 10m (Outdoor unit is higher)

Max. 10m (Outdoor unit is lower)

Max. 25m

Max. 15m (Outdoor unit is higher)

Max. 15m (Outdoor unit is lower)

Item

Models

Unit: mm

Piping hole (ø65)

( )

Piping hole (ø65)

53.5

380.6

Pipng for Liquid 448.6 (ø6.35)

20, 25, 35 : ø9.52

50 : ø12.7

Pipng for Gas

Drain hose 520 (ø16)

53.5

44.5

252.2 7.5

8.3

102.5

585

102.5

133.5450206.5

202450138

44.5 43.2

39.3

200

17.5 60 27

788

199 3

Terminal block

Piping hole right(left)

268

790

VIEW A

→

Drain holes

286.4

290

49.6 43.5

850

203.1 510 136.9

476

2-16×12

314 12

328

Terminal block

Service valve (Liquid)

ø6.35 (1/4'')

Service valve (Gas)

ø12.7 (1/2'')

Ground

terminal

124 34.6

20˚

42.7

100.3

640

Model SRC50ZG-S

Unit: mm

(2) Outdoor unit

Models SRC20ZG-S, 25ZG-S, 35ZG-S

2-16×12

Drain holes (ø20)

138.4

40˚

61.9

18.9165.1510104.9

439.1

111.4

99.4

349.5

313.1

43.1

290

350

23.5312.5

33.5

40˚

42.595.9

540

780

Service valve (Liquid)

Flare connection ø6.35 (1/4'')

Service valve (Gas)

Flare connection ø9.52 (3/8'')

Terminal block

Andere Handbücher für SRK20ZG-S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mitsubishi Heavy Industries Klimaanlage Handbücher

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZMA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTC25VH1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK63ZMA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SKM20ZG-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK20ZMX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK25ZXA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDTC71VNXPVD Produkthandbuch

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDT28KXE6A Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries KXZ Series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDC112KXEN6 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK17ZMP-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDF Series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries KX6 series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDT71VNXVD Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRRM25ZE Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK35ZSX-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK53QE3 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK50ZJ-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDU Series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRF25ZMXA-S Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Hi-COP Series Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SRK28HD Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SCM50ZS-S1 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries FDT Series Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung