Mixcder X1 Bedienungsanleitung
User Manual • Uživatelský manuál • Užívateľský manuál •
Használati utasítás • Benutzerhandbuch
Model: X1
True Wireless Stereo Earphones
2
Content • Obsah • Tartalom • Inhalt
English
3 – 14
Čeština
15 – 26
Slovenčina
27 – 38
Magyar
39 – 50
Deutsch
51 – 62
Importer • Dovozce • Dovozca • Importőr • Importeur
Alza.cz a.s.
Jankovcova 1522/53
Prague 7
www.alza.cz
3
Dear customer,
Thank you for purchasing our product. Please read the following
instructions carefully before first use and keep this user manual for future
reference. Pay particular attention to the safety instructions. If you have
any questions or comments about the device, please contact the customer
line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
4
1Product Overview
2Package Contents
1× Pair of Wireless Earphones 1× Charging Case
1× Type-C Cable 1× User Manual
Touch control
Microphone
Indicator
light
Smart LED display
Charging port
Type-C
5
3Charging
Prior to the first use, please make sure both the earphones and charging
case are fully charged.
3.1 Charge the Charging Case
Please use the supplied charging cable to connect the charging case to a
charger or PC to charge. While charging, the LED digital display will show
the current battery capacity.
3.2 Charge the Earphones
Put the earphones back into the charging case, and the earphones will
power off and be charged automatically. During charging, the earphone
LED turns solid red; after fully charged, LED turns off. When the battery is
low, the LED indicator flash red.
6
4Operating Instructions
4.1 Pairing Single Earphone with Your Device
1. Take out the L or R earphone from the charging case, it will
automatically power on (LED flashes Red and Blue alternately).
2. Turn on the Bluetooth on your device and choose Mixcder X1
to pair. The LED turns off when the earphone pairs with the
device.
4.2 Pairing the L&R Earphones with Your Device
1. Take out the L&R earphones from the charging case, and they
will automatically power on (LED flashes Red and Blue
alternately) and pair with each other.
2. Once they successfully paired with each other, LED of one
earphone goes off and the other flashes Red and Blue
alternately.
3. Please turn on the Bluetooth on your device and choose
Mixcder X1 to pair. The LED turns off when the earphones pair
with the device.
Note: If you have previously paired the earphones with a device, they will
reconnect with the device automatically when you turn them on.
7
5Control Instructions
Function
Operation
Manual boot
Touch and hold the touch control for 3s.
Invoke voice
assistant
In the standby mode (when connected with the
device), touch L or R touch control for 3 times.
Answer a call
Touch L or R touch control twice.
End a call
Touch L or R touch control twice.
Reject a call
Touch L or R hold the touch control.
Increase volume
Touch the R touch control once. If only one
earphone connects to the device, touch L or R
touch control once.
Decrease volume
Touch the L touch control once.
Play/Pause
Touch L or R touch control twice.
Skip to previous
track
Touch and hold the R touch control when both L
and R earphone connect to the device.
Skip to next
track
Touch and hold the L touch control when both L
and R earphone connect to the device. If only
one earphone connects to the device, please
touch and hold the touch control.
8
6Safety Precautions
Mixcder X1 are of excellent quality, and in order to extend lifespan, please
refer to the instructions below:
1. Please keep the earphones out of extreme heat, humidity and
corrosion environment.
2. Please prevent the earphones from being struck, fell, warped, soaked
etc.
3. Please don't dismantle the earphones or the charging case.
4. Please don't overcharge the earphones for quite a long time,
otherwise, it will decrease lifespan.
5. Please use DC 5 V/500 mA chargers/adapters certified by a regulated
manufacturer.
6. Please stop using the earphones if it causes any discomfort or pain.
7. Keep out of reach of children, risk of swallowing small parts or
suffocating on them.
9
7Protecting Your Hearing
The Headphone is held close to your ears, so loud sounds pose a potential
hearing risk. It is highly recommended that setting low volume level before
putting on the headphone and avoiding exposing yourself continuously to
high volumes. If you need to use the headphone for a long period, rest ten
minutes for a half hour using
8Troubleshooting
Q: What to do if the earphones crash?
A: Please put them back into the charging case and then take them out.
Touch and hold the touch control for about 8 seconds.
Q: What if the earphones doesn’t work properly?
A: Please put them into the charging case and then take them out. Touch L
or R earphone twice, and the earphone will enter the pairing mode again.
10
9Specifications
Microphone
Spec.
Microphone Unit
2.75*1.85*0.95mm
Directivity
Omni-directional
S.P.L
42±3dB
Impedance
300Ω
Operating
Voltage
2V
Speaker
Spec.
Speaker
Diameter
Φ13.0±0.05mm
S.P.L
115.5±3dB
Impedance
26Ω±15%
THD
Less Than 3% at 1000Hz
Frequency
Response
20HZ-20KHZ
Wireless
Tech.
Wireless Version
Bluetooth v5.1
Wireless
Distance
10m (indoor), 20m (outdoor)
Transmission
Frequency
2.402GHz-2.480GHz
Support Profile
A2DP/AVRCP/AVDTP/AVRCP/HFP
/SPP/SMP/ATT
Pairing Name
Mixdcer X1
Battery
Spec.
Battery
Capability
Earphone: 30mAh
Charging Case: 500 mAh
Andere Handbücher für X1
1
Inhaltsverzeichnis
Sprachen:
Andere Mixcder Kopfhörer Handbücher
Mixcder
Mixcder Drip Bedienungsanleitung
Mixcder
Mixcder PRO911 Bedienungsanleitung
Mixcder
Mixcder SHAREME 7 Bedienungsanleitung
Mixcder
Mixcder SH302 Bedienungsanleitung
Mixcder
Mixcder T1 Bedienungsanleitung
Mixcder
Mixcder X1 Bedienungsanleitung
Mixcder
Mixcder SHAREME 7 Bedienungsanleitung
Mixcder
Mixcder MAT2 Bedienungsanleitung
Mixcder
Mixcder ShareMe Pro Bedienungsanleitung
Mixcder
Mixcder ANC-G5 Bedienungsanleitung
