MK Martin Pulsar 48 side Programmierhandbuch
MK Martin Enterprise Inc.
3950 Steffl er Rd Elmira, ON, Canada N3B 2Z3
Tel: 519-664-2752
Toll Free: 1-855-664-2752
Fax: 519-664-3695
E-mail: [email protected]
www.mkmartin.ca
Pulsar Finishing Mower Operator’s / Parts Manual
THIRD ANGLE PROJECTION
5
4
3
1
Folder
S:\Solidworks\Solidworks_Elo\Finish Mower\EURO Finishing Mower\60 Finishing Mower\60 Rear Discharge\53285.SLDASM
DWG. NO.
REV
Model
SCALE 1:24
SHEET 3 OF5
DATE DRAWN
MATERIAL
53285
May-17-16 10:54:20 AM
DESCRIPTION
Finishing Mower 60 rear
S:\Solidworks\Solidworks_Elo\Finish Mower\EURO Finishing Mower\60 Finishing Mower\60 Rear Discharge\
Weight(lbs.)
0
Width
Height
Length
0 0
422.75
0
Blank Size
Unit of Measure
ITEM ID.
53285
Config ID
53285
DIMENSIONS ARE IN INCHES
TOLERANCES NON SPECIFIED:
FRACTIONAL
1/64
BEND
1.0
TWO PLACE DECIMAL
0.01"
THREE PLACE DECIMAL
0.002"
Notes
DO NOT SCALE DRAWING
REV: 18-1
Table of Contents
Warranty -------------------------------------------------------------------------------------------------
Registration ---------------------------------------------------------------------------------------------
Safety -----------------------------------------------------------------------------------------------------
Assembly ------------------------------------------------------------------------------------------------
Decal Location -----------------------------------------------------------------------------------------
Operation ------------------------------------------------------------------------------------------------
Sign O Form -------------------------------------------------------------------------------------------
48 - 72 Parts --------------------------------------------------------------------------------------------
Deector Parts ------------------------------------------------------------------------------------------
Belt Arrangement --------------------------------------------------------------------------------------
Gearbox --------------------------------------------------------------------------------------------------
PTO Driveline Dimensions --------------------------------------------------------------------------
PTO -------------------------------------------------------------------------------------------------------
Maintenance -------------------------------------------------------------------------------------------
Bolt Torque Chart --------------------------------------------------------------------------------------
2
3-4
5-6
7
8-9
10-11
12
14-16
16-17
17
18-19
20
21-22
23
24
2
Warranty
Eff ective on products retailed on or after November 1, 2017
Two Year Limited Consumer Warranty
Five Year Limited Consumer Warranty on Gearboxes
90 Day Limited Commercial Warranty including Gearboxes
Commercial includes rental and industrial applications.
Warranty begins at the time of customer delivery and is activated upon warranty registration receipt
at MK Martin Enterprise Inc.
Warranty coverage is null and void unless the Warranty Registration form has been completed
in full and is on le at
MK Martin Enterprise Inc.
Keep your registration copy in a safe place, it is required as proof of warranty activation.
This new and unused product is warranted by
MK Martin Enterprise Inc.
to be free from defects in material and workmanship under
normal use and regular service as described in the owner’s manual, for a consumer period of 2 years and 5 years for gearboxes,
from the date of delivery, and commercial period of 90 days, including gearboxes, from the date of delivery. Warranty is limited to
the replacement of parts and / or repair of the product.
If issues develop within the warranty period with the product, contact the local dealer from which you purchased the unit. Only
MK
Martin
authorized dealers may make repairs to the product or a ect the replacement of defective parts, unless otherwise approved
by
MK Martin
. Repairs / replacement will be done at no charge within a reasonable time after the receipt of the product.
This warranty does not cover the following items:
1. Normal replacement of service items.
2. Normal maintenance or adjustments.
3. Machines or parts lost or damaged during shipment,
4. Accessory items / parts not supplied by
MK Martin
5. Damages resulting from:
misuse, negligence, accident, theft or re
use of improper or insu cient fuel, uids or lubricants
use of after market parts or accessories, unless approved by
MK Martin
modi cations, alteration, tampering or improper repair
any device or accessories installed by other than an authorized dealer.
6. Tires are covered by the manufacturer of the tire and the warranty period speci ed by that manufac-
turer. Please contact the tire manufacturer for warranty on these items.
MK Martin Enterprise Inc.
shall not, in any event, be liable for any losses, damages or costs; to include pro ts, travel, transportation,
pick up, delivery, towing cost, tow vehicle, loss of use, whether special, incidental, consequential or otherwise, in any way. Unit or
parts are returned at the customer’s expense.
Include a copy of your completed Warranty Registration form with any claim as proof of warranty activation.
There are no warranties, expressed or implied, other than those speci ed herein. No agent, employee or other person has any
authority to vary any of the foregoing provisions.
Warranty coverage is null and void unless the Warranty Registration form has been completed in full and is on le at MK Martin Enterprise Inc.
Warranty begins at the time of customer delivery and is activated upon Warranty Registration receipt at MK Martin Enterprise Inc.
3950 Steffl er Rd. Elmira Ontario, Canada N3B 2Z3 Email : [email protected] Fax : (519)-664-3695 Tel : (519)-664-2752
230817
3
M K Martin Enterprise Inc
3950 Steffl er Rd
Elmira ON CA N3B 2Z3
---------------------------------------------------------------------------------------------------------------------
Purchaser’s warranty protection is valid only when this completed form or a copy of this form
is on fi le at M K Martin Enterprise Inc. By fi lling out this form the purchaser has acknowledged
delivery of equipment and owner’s / operator’s manual and has accepted the condition of the
equipment.
Date of delivery to purchaser -------------------------------------------------------
Type of Equipment -------------------------------------------------------------------
Model # ------------------------------- Serial # -------------------------------------
Retailer’s Signature Indicates
• Equipment was properly assembled as directed by manufacturer
• Equipment was tested for functionality and operates properly
• Purchaser was instructed in safe and proper operating procedures
• Warranty was explained to purchaser
• Purchaser was given the operators manual
Retailer
Signature ----------------------------------------------------------------
Company ---------------------------------------------------------------
Address ---------------------------------------------------------------
-------------------------------------------------------------
Purchaser’s signature indicates
• Acceptance of equipment fully assembled
• Received operator’s manual
• Clearly understands conditions of warranty
• Received instructions of safe and proper operation of equipment
Purchaser
Signature -----------------------------------------------------------
Company ---------------------------------------------------------
Mailing address -------------------------------------------------
City ------------------------------------------ Prov/State -------- Postal Code/Zip ---------------
Available phone number -----------------------------------------
Warranty is valid only when it has been received by manufacturer at address above
4
-------------------------------------------------------------------------------------------------------------------------
Postage
Stamp
M K Martin Enterprise Inc
3950 Steffl er Rd
Elmira ON CA N3B 2Z3
Fold Here
Please Cut and Return to M K Martin Enterprise Inc
Fold And Tape here Do not tape all edges or use staples
Warranty Registration
5
Safety
Take Note! This safety symbol is found throughout this manual to call your attention to instruc-
tions involving yourself and others working around the machine.
• Failure to follow these instructions can result in injury or death
This symbol means
-- Attention!
-- Become Alert!
-- Your Safety is involved!
Signal words are used in this manual.
Caution: Indicates a potentially hazardous situation that may result in injury.
Warning: Indicates a hazardous situation that could result in serious injury or death.
Danger: Indicates a hazardous situation that needs to be avoided. It is you the operator that
needs to be aware of these dangers.
If you have any questions not answered in this manual please contact your dealer or
M K Martin Enterprise Inc Tel: 519-664-2752
3950 Steffl er Rd 1-855-664-2752
Elmira On Ca N3B 2Z3 Fax: 519-664-3695
www.mkmartin.ca
6
Safety -- It’s in your interest!
1. Read and understand the Operator’s Manual and all safety signs before operating, servicing,
adjusting, repairing or unplugging.
2. Do not allow riders.
3. Install and secure all guards and shields before operating the equipment.
4. Keep hands, feet, hair and clothing away from all moving parts.
5. Place all controls in neutral, stop tractor engine, set park brake, remove ignition key and wait
for all moving parts to stop before servicing, adjusting, repairing or unplugging the mower.
6. Place all tractor controls in neutral before starting.
7. Never operate the mower unless you are sitting on the tractor seat.
8. Do not operate the tractor inside a building unless there is adequate ventilation.
9. Clear the area of bystanders, especially small children before starting.
10. Stay clear of the machine when engaging the PTO. Keep others away.
11. Clean reectors, SMV sign and lights if used, before transporting.
12. When transporting use hazard ashing lights.
13. Do not put hands or feet under machine while tractor engine is running.
14. Do not operate the mower in a raised position.
15. Objects can be thrown out from the mower with sucient force to severely injure
people or pets. Stay away from mower when it is running, keep others away.
16. Remove all sticks, stones and other loose matter in the area before starting.
17. Review operator’s manual annually.
It is the responsibility of the owner or operator to read this manual and to train
all other operators before they start working with the mower.
Follow all safety instructions. Safety is everyones business. By following recom-
mended procedures, a safe working environment is provided for the operator,
bystanders and the area around the work-site.
Untrained operators are not qualied to operate the mower!
7
These Finish Mowers are shipped with the “A” Frame disassembled.
Assemble by undoing the top “A” Frame bolt and inserting the Brace Bars as shown above.
After tightening the nut on the bolt, back the nut o 1/3-1/2 turn to allow some movement in the
linkage.
Ensure the Anti-Scalp roller turns free, a few drops of oil my be added on the axle shaft at this
time.
Ensure the wheels and the caster pivot turn freely. Lightly grease the caster pivot.
When attaching Mower to tractor ensure drive-line is the right length and does not bind.
(See page 22 for directions)
Assembly Information
THIRD ANGLE PROJECTION
5
4
3
1
Folder
S:\Solidworks\Solidworks_Elo\Finish Mower\EURO Finishing Mower\60 Finishing Mower\60 Rear Discharge\53285.SLDASM
DWG. NO.
REV
Model
SCALE 1:24
SHEET 3 OF5
DATE DRAWN
MATERIAL
53285
May-17-16 10:54:20 AM
DESCRIPTION
Finishing Mower 60 rear
S:\Solidworks\Solidworks_Elo\Finish Mower\EURO Finishing Mower\60 Finishing Mower\60 Rear Discharge\
Weight(lbs.)
0
Width
Height
Length
0 0
422.75
0
Blank Size
Unit of Measure
ITEM ID.
53285
Config ID
53285
DIMENSIONS ARE IN INCHES
TOLERANCES NON SPECIFIED:
FRACTIONAL
1/64
BEND
1.0
TWO PLACE DECIMAL
0.01"
THREE PLACE DECIMAL
0.002"
Notes
DO NOT SCALE DRAWING
8
Decal Location
THIRD ANGLE PROJECTION
1
2
3
4
5
7
8
9
10
11
4
5
6
6
12
13
5
4
3
1
Folder
S:\Solidworks\Solidworks_Elo\Finish Mower\EURO Finishing Mower\60 Finishing Mower\60 Rear Discharge\53285.SLDASM
DWG. NO.
REV
Model
SCALE 1:24
SHEET 6 OF7
DATE DRAWN
MATERIAL
53285
May-17-16 11:54:20 AM
DESCRIPTION
Finishing Mower 60 rear
S:\Solidworks\Solidworks_Elo\Finish Mower\EURO Finishing Mower\60 Finishing Mower\60 Rear Discharge\
Weight(lbs.)
0
Width
Height
Length
0 0
420.08
0
Blank Size
Unit of Measure
ITEM ID.
53285
Config ID
53285
DIMENSIONS ARE IN INCHES
TOLERANCES NON SPECIFIED:
FRACTIONAL
1/64
BEND
1.0
TWO PLACE DECIMAL
0.01"
THREE PLACE DECIMAL
0.002"
Notes
DO NOT SCALE DRAWING
6 - Part # PULSAR
- x2
5 - Part # A75 - x2
DANGER of possible
shearing of limbs. Keep
a safe distance from the machine while it is
working.
1 - Part # 224
DANGER. Sharp objects could
be thrown. Keep safe distance
from the machine
3 - Part # 227
Danger of dropping. Do not climb
on to the machine.
4 - Part # 211 - x2
Risk of injuries. Do not
remove the protective
shields from the belts unless all moving
parts of the machine have reached a com-
plete standstill.
2 - Part #
MKlogomadeincanada 8 - Serial Plate
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere MK Martin Rasenmäher Handbücher
Beliebte Rasenmäher Handbücher anderer Marken
TALEN TOOLS
TALEN TOOLS AVR HGM30 Bedienungsanleitung
DEWEZE
DEWEZE ATM-725 Bedienungsanleitung
Weed Eater
Weed Eater 180083 Bedienungsanleitung
Husqvarna
Husqvarna Poulan Pro PP185A42 Bedienungsanleitung
Better Outdoor Products
Better Outdoor Products Quick Series Bedienungsanleitung
Cub Cadet
Cub Cadet 23HP Z-Force 60 Betriebsanleitung
