4
number from mo-Vis and the product must be shipped to a service
centre designated by mo-Vis. mo-Vis will repair or, at mo-Vis’ option,
replace any product covered by the warranty.
Disclaimer and Limitations of Remedies
The express warranties set forth in this agreement are in lieu of all
other warranties of merchantability or fitness of purpose. In no event
shall mo-Vis be liable for any direct, indirect, incidental or
consequential damages resulting from any defect in this product.
Warranty of parts subject to “normal wear and tear” (e.g. pads,
joystick balls, batteries …) are not covered in the warranty except as
it applies to defects in material or construction.
Amendments
No person is authorised to alter, extend or waive the warranties of
mo-Vis.
Voiding of warranties
The foregoing warranties are contingent upon the proper installation,
use, maintenance and care of the product. The warranty will be void
if the product has been installed or used improperly, or if it has been
repaired or any part replaced by persons other than mo-Vis or an
authorised dealer. The unit is considered as a non-serviceable part.
The addition of equipment or features that are not manufactured or
recommended by mo-Vis could affect the intended function of the
mo-Vis product and may invalidate the warranty.
Understanding usage
The health care professional (authorised installer) is responsible for
understanding the intended use of the mo-Vis equipment, the
specifications and its programming parameters. mo-Vis cannot be
held responsible for damage caused by incorrect installation or
incorrect use of the product. Misuse, mishandling, or storage is not
covered by this warranty.
Safety precautions
General
The Q2M mounting system is intended to mount small and light
devices, such as joysticks, switches, phone holders, tablet holders,
etc. in a very flexible and modular way.
