MOA FP511 Bedienungsanleitung
Food Processor
Instruction Manual
English / Nederlands / Deutsch / Français
www.moacolors.com
Food Processor - English manual 2
EN
BEFORE USE
Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket.
This appliance is for household use only. When using electrical
appliances, basic safety precautions should always be followed to
avoid res, electric shocks, burns, or other injuries and damage. Read
these operating and safety instructions carefully.
IMPORTANT SAFEGUARDS (1/2)
1. Read and save all instructions.
2. To protect against risk of electrical shock,do not immerse base,motor,
cord, or plug in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. This appliance should not be used bychildren.
5. Unplug cord from outlet when not in use, before putting on or taking
off parts, and before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or is dropped or damaged in any
manner. Call our toll-free customer service number for information on
examination, repair or electrical or mechanical adjustment.
8. The use of attachments not recommended or sold by the appliance
manufacturer, may cause re, electric shock, or injury.
9. Do not use your food processor if any part is broken.
10. Do not use appliance outdoors.
11. Do not let cord hang over edge of table or counter, or touch hot
surfaces.
12. Keep hands and utensils away from moving blade and disc while
processing food to reduce the risk of severe personal injury and/
or damage to the food processor. A rubber scraper may be used but
ONLY when the food processor is not running.
Food Processor - English manual 3
EN
IMPORTANT SAFEGUARDS (2/2)
13. The blade and disc are sharp. Handle carefully. Store out of reach
of children.
14. To reduce the risk of injury, never place cutting blade or disc on
base without rst putting bowl properly in place.
15. Be certain lid is securely locked in place before operating
appliance
16. Never feed food into food chute by hand. Always use food pusher.
17. Do not attempt to defeat the lid interlock mechanism.
18. Make sure the blade or disc has come to a full stop before
removing lid.
19. To reduce the risk of injury, be sure to insert or remove blade and
disc using hubs provided for this purpose.Use caution when removing
blade and disc from the bowl, when emptying the bowl, and when
cleaning.
20. Be sure to turn switch to OFF ( O ) position after each use.
Always use the pusher to clear the food chute. When this method is
not possible, turn the motor off and disassemble unit to remove the
remaining food.
21. The appliance is not intended for commercial, professional or
industrial use. It is designed
and built exclusively for household use only.
22. Never use appliance for a longer period or with a larger amount of
ingredients other than that recommended by appliance manufacturer.
23. The maximum rating of this unit is based on using the Chopping/
Mixing Blade. Using the Slicing/Shredding Disc may draw signicantly
less power.
24. Do not place on or near a hot gas or electric burner or in a heated
oven.
25. Do not use appliance for other than intended use.
Food Processor - English manual 4
EN
PARTS DESCRIPTION & POSITION
1. Pushers 10. Thin slicing/ ne shredding disc
2. Lid 11. Big rotating head
3. Maxi-blend canopy 12. Small rotating head
4. Removable drive Sleeve 13. Screening plate
5. Bowl 16. Top cover
6. Rotor 17. Blender cup cover
7. Main machine 18. Blender cup
8. Dough tool 19. Blender base
9. Knife blade
CONSUMER SAFETY INFORMATION
This appliance is intended for householduse only. WARNING! Shock
Hazard: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is intended
to t into a polarized outlet only one way. If the plug does not t
fully into the outlet, reverse the plug. If it still does not t, contact a
qualied electrician. Do not attempt to modify the plug in any way. To
avoid an electrical circuit overload, do not use another high wattage
appliance on the same circuit with your food processor.The length of
the cord used on this appliance was selected to reduce the hazards of
becoming tangled in, or tripping over a longer cord. If a longer cord
is necessary,an approved extension cord may be used.The electrical
rating of the extension cord must be equal to or greater than the rating
of the appliance. Care must be taken to arrange the extension cord so
that it will not drape over the countertop or tabletop where it can be
pulled on by children or accidentally tripped over.
1
2
2
1
910
4
3
3
5
6
7
8
11
12
13
16
17
18
19
Food Processor - English manual 5
EN
How to Lock the Bowl
Align base and bowl as illustrated.Turn bowl clockwise until it locks into
place. The bowl will lock onto the base in 3 different positions for user
convenience. NOTE: The food processor will not work unless the bowl
is locked into position.
How to Assemble and Lock the Lid
Align lid as illustrated by placing thumbon lid tab and twisting lid
clockwise. Four visual alignment markers are provided (see illustration),
one on bowl, one onhandle and two on bowl lid. NOTE: The food
processor will not work unless the lid is locked into position.
How to Operate the Controls
The control dial is conveniently located on the front of the base. Rotate
the knob clockwise to select a speed:
1 for Low
2 for High
The processor will run continuously. For instant on and off control, use
the PULSE (P) button by rotating knob counterclockwise.
USING YOUR FOOD PROCESSOR
Food Processor - English manual 6
EN
PROCESSING TIPS AND TECHNIQUES
1. This food processor is excellent to chop, mix, slice, or shred most
foods. However, to maintain peak performance, do not use your food
processor for the following: grinding grain, coffee beans or spices;
slicing frozen meat; or crushing ice.
2. To achieve maximum capacity, use Chopping/Mixing blade of Big
Mouth and add food no higher than the maximum ll line on food
chute. See Food Processing Charts for more information.
3. Operating time will depend on quantity of food being processed.
Most foods can be sliced, chopped, or shredded in seconds. If unit is
operated for 30 seconds continuously, let the processor rest about 3
minutes before continuing.
4. For a more uniform consistency, start with pieces of food that are
similar in size. Carrots, for example,should all be cut in 1-inch (2.5
cm) chunks. Do not process 4-inch (10cm) pieces with 1⁄2- inch (1 cm)
pieces.
PROCESSING USING CHOPPING
/MIXING BLADE
1. The Chopping/Mixing Blade can be used to coarsely chop,nely
mince,mix, or puree food to a smooth consistency.
2. Make sure the Control Switch is turned to OFF (O) and the unit is
unplugged.
3. Lock the bowl onto base.(See “How to Lock the Bowl” on page 3.)
4. Place the Chopping/Mixing Blade onto motor shaft of food
processor in center of bowl.Turn
slowly until blade drops into place.Handle carefully; the blade is sharp.
5. Lock lid onto bowl. Insert food pusher into food chute.
6. Do not puree or mash starchy vegetables like potatoes. They will be
over-processed in a second and turn gummy.
7. Plug in unit and process food .The processing speed
Chopping/ food.The Pulse button can help you avoid overprocessing.
Mixing Blade and time will determine the nished consistency of the
Reference the food processing chart for recommended
processing times and speeds.
Food Processor - English manual 7
EN
8. When nished processing,select OFF (O) or release from
PULSE position.Wait until blade has stopped rotating before removing
lid. Unplug the unit.
PROCESSING USING SLICER/SHREDDER
1. To slice or shred cheese, select rmcheese like Cheddar,Monterey
Jack,or Swiss.Place cheese in freezer for 30 minutes before processing.
2. The Reversible Slicer/Shredder Disc has a slicing blade on one
side and shredding teeth on the other.The name engraved on the
blade,facing up, is the function selected.Place on motor shaft with
desired cutting edge facing up.
3. Make sure the Control Switch is turned to OFF(O)and the unit is
unplugged.
4. Lock the bowl onto base.(See ”How to Lock the Bowl” on page 3.)
5. Place Removable Drive Sleeve on Motor Shaft.Put Slicer/ Shredder
Disc on Removable Drive Sleeve with the desired side facing up for
either slicing or shredding.Lock lid onto bowl.(See ”How to Assemble
and Lock the Lid” on page 4.)
6. To slice/shred large foods(such as chunk of cabbage, green pepper,
whole tomato) open food chute lid by lifting latch. Depress food holder
to the right.Insert food and lock lid.
Chopping/
Mixing Blade
Motor Shaft
Motor Shaft
Slicer
Shredder
Disc
Food Processor - English manual 8
EN
7. To julienne vegetables, slice then remove from bowl and restack
the vegetables. Pack into food chute with slices vertical. Slice again to
make match-stick cut vegetables.
8. To slice/shred long,thin foods (such as potato, pepperoni, carrots,
celery). Lock lid. Long foods can be inserted into the chute opening and
processed as long as the food chute lid is closed.
9. Insert food pusher in chute. Always use the food pusher
to feed food into the chute.
NEVER PUSH FOOD THROUGH CHUTE WITH HANDS.
10. Plug in unit.
11. Select speed. While pressing on food pusher, select 1 or 2 for
optimum slicing and shredding performance or PULSE to process food.
Reference the food processing chart for recommended processing times
and speeds. NOTE:The food chute lid is designed to pivot towards the
right when processing food that lls the whole food chute capacity.
12. When food chute is empty, select OFF(O) or release from PULSE
position.Wait until blade has stopped rotating before removing lid.
Unplug the unit.
PROCESSING USING CITRUS JUICER
1. Make sure the Control Switch is turned to OFF(O) and the unit is
unplugged.
2. Lock the bowl onto base.(See ”How to Lock the Bowl” on page 3.)In
case of any juice effusing due to high speed rotation, please choose the
low speed before juicing.
3. Put screening plate on motor shaft.
4. Fit the appropriate cone onto the drive shaft. (The large cone
is suitable for juicing big citrus fruit ,such as grapefruit , oranges etc.
The small cone is suitable for juicing small citrus fruit, such as lemons,
limes etc.)
Food Processor - English manual 9
EN
5. Cut a citrus fruit in half and press the cut end of one fruit half onto
the cone. Turn on the machine and choose the speed. The cone scrapes
the pulp out and squeezes the juice from the fruit.
6. To maximize the quantity of juice extracted from a fruit, press a fruit
onto the cone several times.
PROCESSING USING MIXING CUP
1. First check the position switch in stop state.
2. Put sealing ring into cutter seat slot, screw and fasten mixing
cup into cutter seat(clockwise for fastening, and counterclockwise
for loosening), put the mixing cup cover and the feed cover on.
3. Clockwise screw the cutter seat into the main machine with your
hand (counterclockwise for loosening), no holding the cup with your
hand for disassembling, otherwise, the cup will leave the cutter seat
make food in the cup leak out.
Egg mixing
Put egg without eggshell into the mixing cup, pour appropriate cool
boiled water, add some our. Put and fasten the cover, press the button
of weak grading for 1 min.
Motor Shaft
Screening
Plate
Rotating
Head
Top cover
Mixing Cup
Mixing Cutter
Seat
Food Processor - English manual 10
EN
Vegetable or fruit mixing
For vegetable or fruit to be mixed, after peeling or shelling, and pitting,
cut it into blocks or sections,every time put 600g, pour appropriate cool
boiled water, perform assembly according to assembling specication
for use turn on for mixing for 1min by 5 grading.
Soy milk making
1. For making soy milk, immerse soy in water for 4 hours. Assemble
soy milk maker;put lter net vertically in and make it clutch with the
mixing cup according to the legend, put the cover on, take off the
feed cover, put some immersed soy into the lter net, pour appropriate
water, total quantity of water and soy shall not be over maximum level
(MAX), fasten the top cover, turn on the machine for mixing for 1 min.
Repeating twice can get better effect. (It is recommended that soy
quantity is 150 g, and water quantity 1L.)
2. If soy milk is too dense, pour it out, add some water for diluting.
TROUBLESHOOTING GUIDE
Unit does not operate on any speed or Pulse
1. Is the unit plugged in? Does the outlet work?
2. Are the bowl, bowl lid, and food chute lid all locked in place? See
pp. 4-“How to Assemble.”
Food is not chopped, sliced or shredded uniformly
1. Packing too much food in the food chute, or pushing too hard on the
food pusher may cause the processed food to be irregulary sliced or
shredded. Refer to the food processing charts for recommended sizes
and quantities.
Unit stops and will not come back on
1. Are the bowl, bowl lid, and food chute lid all locked in place?
They may have moved slighty during processing. See pp. 4 “How to
Assemble.”
2. Is the outlet still working? Check it by plugging in a working lamp or
other appliance. You may have overloaded the circuit and blown a fuse
or tripped the circuit breaker.
3. Turn unit OFF, allow to stand for 3 to 4 minutes, then turn back ON.
If none of these suggestions correct the problem,DO NOT attempt to
repair the unit. Call the Customer Service number to get the name of
your nearest Authorized Service Center.
Inhaltsverzeichnis
Sprachen:
Andere MOA Küchenmaschine Handbücher
