Mocka Brooklyn Change Table and Drawer Set Bedienungsanleitung

WARNING: Any furniture that is not anchored to a wall has the potential

to tip over in certain circumstances, i.e. if a child attempts to climb up on

the furniture or in the event of an earthquake. Accordingly, we

recommend that all furniture is anchored to a wall. We supply a free

safety wall anchor with all furniture sold and we recommend these are

used to prevent your product tipping. The fixing device provided should

fit most wall types, but please note that different wall materials may

require different fixing devices from those supplied.

x20

EF G H

x4 x28

x28

x40

x22

12 mm

30 mm

12 mm

L + R L + R

Hardware Supplied

washer

Wall

Screw

r/washer

screw

wall

anchor

Safety

Strap

Wall Strap

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.

Phillips & Flathead screwdrivers required

Brooklyn Change Table & Drawer Set

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Begin by identifying each wooden piece using the number labels on their

side. Lay them all out in order. Screw hardware (D) into holes in pieces

[1] and [2]. Slot together with table pieces [3] as shown. Place locking

nuts (E) into corresponding holes and tighten with a screwdriver.

Screw hardware (D) into the pre-drilled holes in piece [3]. Push or tap in

two wooden dowels (F) into piece [3] as shown.

Brooklyn Change Table & Drawer Set

mocka.co.nz | mocka.com.au

Assembly Instructions

Begin by identifying each wooden piece using the number labels on their

side. Lay them all out in order. Screw hardware (D) into holes in pieces

[1] and [2]. Slot together with table pieces [3] as shown. Place locking

nuts (E) into corresponding holes and tighten with a screwdriver.

Screw hardware (D) into the pre-drilled holes in piece [3]. Push or tap in

two wooden dowels (F) into piece [3] as shown.

Flip table top over and slot into piece [6]. Screw in two bolts (D) and two

dowels (F) into shelf piece [7]. Push nut (E) into holes in piece [6] as

shown and tighten with a screwdriver.

Find pieces [4] and [5]. Line up two drawer rails (B) with corresponding

holes on each wooden piece as shown above. Fasten to wood using

three screws (A) in each.

Brooklyn Change Table & Drawer Set

mocka.co.nz | mocka.com.au

Assembly Instructions

Screw bolts (D) and dowels (F) into side panels [4] and [5] as shown.

Slot (D) and (F) into each end of pieces [8] and [9]. Slide table and shelf

piece, and braces [8] & [9] together between side panels. Secure by

placing hardware (E) in corresponding holes in the underside of pieces

[3, 7, 8, & 9]. Tighten until rigid.

On the back side of the set, fit boards [10] and [11] into the grooves. Use

small screws (G) all around to fasten boards to the change table unit.

Fx2

x12

Fx2

Brooklyn Change Table & Drawer Set

Assembly Instructions

mocka.co.nz | mocka.com.au

Jolt Wardrobe

ASSEMBLY INSTRUCTIONS

mocka.co.nz | mocka.com.au

Screw bolts (D) and dowels (F) into side panels [4] and [5] as shown.

Slot (D) and (F) into each end of pieces [8] and [9]. Slide table and shelf

piece, and braces [8] & [9] together between side panels. Secure by

placing hardware (E) in corresponding holes in the underside of pieces

[3, 7, 8, & 9]. Tighten until rigid.

On the back side of the set, fit boards [10] and [11] into the grooves. Use

small screws (G) all around to fasten boards to the change table unit.

Fx2

x12

Fx2

To assemble the drawers, first screw 4x bolts (D) into front panel [15].

Fit panels [12] and [13] over the bolts as shown, ensuring the grooves

in panels face inwards. Secure using 4x locking nuts (E) and tighten

with a screwdriver.

Slot panel [16] down into grooves in the side and front panels. Insert 2x

dowels (F) into the end of both support braces [17] and peg into holes in

front panel [15].

Fx2

Drawers (x2) Drawers (x2)

Brooklyn Change Table & Drawer Set

Assembly Instructions

mocka.co.nz | mocka.com.au

910

Insert 2x dowels (F) into the other end of each support piece [17]. Place

back panel [14] into position on dowels and fasten into place using 4x

screws (H).

Finally, attach rail hardware (C) to both left and right side of the drawer

using screws (A). Repeat Steps 7 to 10 until all four drawers are fully

assembled.

Drawers (x2) Drawers (x2)

Fx2

Brooklyn Change Table & Drawer Set

Assembly Instructions

mocka.co.nz | mocka.com.au

910

Insert 2x dowels (F) into the other end of each support piece [17]. Place

back panel [14] into position on dowels and fasten into place using 4x

screws (H).

Finally, attach rail hardware (C) to both left and right side of the drawer

using screws (A). Repeat Steps 7 to 10 until all four drawers are fully

assembled.

Drawers (x2) Drawers (x2)

Fx2

Now both drawers are made up, slide them into rails in the change

table unit.

Ensure the drawers easily slide open and closed.

Brooklyn Change Table & Drawer Set

Assembly Instructions

mocka.co.nz | mocka.com.au

13 14

Attach the safety strap (W) to the top of the back side of the unit using

screw (Y). Tighten with a screwdriver.

Once assembled lift furniture into place, do not drag. Use a drill to create

a small hole lining up with the top of the safety strap (W). Fasten to wall

using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced

and steady before use. You’re done, enjoy!

wall

screw

wall

anchor

wall

screw

Washer

Strap

Brooklyn Change Table & Drawer Set

Assembly Instructions

mocka.co.nz | mocka.com.au

Inhaltsverzeichnis

Andere Mocka Inneneinrichtung Handbücher

Mocka

Mocka Hamptons Six Drawer Bedienungsanleitung

Mocka

Mocka Zander Coffee Table Bedienungsanleitung

Mocka

Mocka Replica Eames Lounge Chair & Ottoman Bedienungsanleitung

Mocka

Mocka Otto Woven Chair Bedienungsanleitung

Mocka

Mocka Savannah Three Drawer Bedienungsanleitung

Mocka

Mocka Kenny Desk Bedienungsanleitung

Mocka

Mocka Haywood Desk Bedienungsanleitung

Mocka

Mocka Hamptons Bedienungsanleitung

Mocka

Mocka Sadie Bedienungsanleitung

Mocka

Mocka Ashford 230920 Bedienungsanleitung

Mocka

Mocka Milton Medium Plant Stand Bedienungsanleitung

Mocka

Mocka Jolt Bedside Bedienungsanleitung

Mocka

Mocka Chelsea Tallboy Drawers Bedienungsanleitung

Mocka

Mocka Livi Bench Seat Bedienungsanleitung

Mocka

Mocka Savannah Two Drawer Bedside Bedienungsanleitung

Mocka

Mocka Leon Dining Table Bedienungsanleitung

Mocka

Mocka Sadie Bedienungsanleitung

Mocka

Mocka Jesse Tallboy Bedienungsanleitung

Mocka

Mocka Denham Desk Bedienungsanleitung

Mocka

Mocka Southport Rattan Decor Stand Bedienungsanleitung

Mocka

Mocka Sadie Bedienungsanleitung

Mocka

Mocka Edmond Bedienungsanleitung

Mocka

Mocka Aspen Wardrobe Bedienungsanleitung

Mocka

Mocka Olsen Entertainment Unit Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung