Mocka Chelsea Low Sideboard Bedienungsanleitung

A B C D E F G H

Phillips & Flathead screwdrivers

and hammer required

Hardware Supplied

dowel

x24

bolt

x12

locking

nut x12

small

screw x20

screw

x12

plastic

glide x4

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.

Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

nut

WARNING: Any furniture that is not anchored to a wall has the

potential to tip over in certain circumstances, i.e. if a child

attempts to climb up on the furniture or in the event of an

earthquake. Accordingly, we recommend that all furniture is

anchored to a wall. We supply a free safety wall anchor with all

furniture sold and we recommend these are used to prevent

your product tipping. The fixing device provided should fit most

wall types, but please note that different wall materials may

require different fixing devices from those supplied.

long

dowel x4

bolt

washer

V W

X Y

screw

wall

anchor x1

safety

strap x1

Wall Strap

slide

rail x2

slide

rail x2

slide

rail x2

slide

rail x2

small

bolt x10

small

locking

x10

KLNM OP

screw

wedge

screw

dowel

allen

key x1

Chelsea Low Sideboard

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Attach panel [6] to panel [4] using 2x long dowels (B) and 2x screws (P).

Attach 2x bolts (C) to panel [4]. Tighten with a screwdriver.

Attach 1x slide rail (G) to the side of panel [7] as shown above. Secure

with 3x small screws (E). Flip panel [7] over and attach 1x slide rail (F).

Secure with 3x small screws (E) and tighten with a screwdriver.

FLIP

Chelsea Low Sideboard

mocka.co.nz | mocka.com.au

Assembly Instructions

Attach panel [6] to panel [4] using 2x long dowels (B) and 2x screws (P).

Attach 2x bolts (C) to panel [4]. Tighten with a screwdriver.

Attach 1x slide rail (G) to the side of panel [7] as shown above. Secure

with 3x small screws (E). Flip panel [7] over and attach 1x slide rail (F).

Secure with 3x small screws (E) and tighten with a screwdriver.

FLIP

Attach panel [7] to panel [4] and secure with 2x locking nuts (D). Tighten

with a screwdriver.

Attach panels [5] either side of panel [7] using 2x long dowels (B) as

shown.

Chelsea Low Sideboard

mocka.co.nz | mocka.com.au

Assembly Instructions

Attach 1x slide rail (F) to panel [2] and secure with 3x small screws (E).

Now insert 4x small dowels (A) and 2x bolts (C) into panel [2]. Attach 1x

slide rail (G) to panel [3] and secure with 3x small screws (E). Tighten

with a screwdriver. Insert 4x dowels (A) and 2x bolts (C) into panel [3].

Attach panels [2] and [3] to panels [4]/[5] and secure with 4x locking nuts

(D). Tighten with a screwdriver.

Chelsea Low Sideboard

Assembly Instructions

mocka.co.nz | mocka.com.au

Jolt Wardrobe

ASSEMBLY INSTRUCTIONS

mocka.co.nz | mocka.com.au

Attach 1x slide rail (F) to panel [2] and secure with 3x small screws (E).

Now insert 4x small dowels (A) and 2x bolts (C) into panel [2]. Attach 1x

slide rail (G) to panel [3] and secure with 3x small screws (E). Tighten

with a screwdriver. Insert 4x dowels (A) and 2x bolts (C) into panel [3].

Attach panels [2] and [3] to panels [4]/[5] and secure with 4x locking nuts

(D). Tighten with a screwdriver.

Insert 6x bolts (C) into panel [1].

Attach panel [1] to panels [2], [3] and [6] using 6x small dowels (A) and

secure with 6x locking nuts (D). Tighten with a screwdriver.

Chelsea Low Sideboard

Assembly Instructions

mocka.co.nz | mocka.com.au

910

Slide panel [9] down the grooves between panels [2] and [3] to form the

back of the unit.

Attach two leg panels [10] to the underside of panel [8] as shown, using

2x dowels (S) and 2x bolts (M). Secure with 2x nuts (N). Tighten the

bolts with the allen key (T) and the nuts with a flathead screwdriver.

Chelsea Low Sideboard

Assembly Instructions

mocka.co.nz | mocka.com.au

910

Slide panel [9] down the grooves between panels [2] and [3] to form the

back of the unit.

Attach two leg panels [10] to the underside of panel [8] as shown, using

2x dowels (S) and 2x bolts (M). Secure with 2x nuts (N). Tighten the

bolts with the allen key (T) and the nuts with a flathead screwdriver.

Attach two leg panels [10] to panel [8] using 2x dowels (S) and 2x bolts (M).

Secure with 2x nuts (N). Tighten the bolts with the allen key (S) and the nuts with

a flathead screwdriver. Attach 4x plastic glides (O) to the end of each leg. Attach

panel [11] to panel [8] using 2x small dowels (A) and secure with 1x screw (P).

Attach panel [8] to the main unit as shown, using 6x small dowels (A) and

secure with 6x screws (P). Tighten with a screwdriver.

Chelsea Low Sideboard

Assembly Instructions

mocka.co.nz | mocka.com.au

13 14

Insert 1x dowel (A) and 5x small bolts (J) into panel [12]/[18]. Secure

panels [13], [14] and [17] to panel [12]/[18] with 5x small locking nuts

(K). Tighten with a screwdriver. Slide panel [15] down along the

grooves between panels [13] and [14] to form the base of the drawer.

Attach panel [16] to panels [13] and [14] using 6x screws (L). Now attach 1x

slide rail (I) to panel [14] and 1x slide rail (H) to panel [13] as shown. Secure

with 4x small screws (E) and tighten with a screwdriver. Insert the

assembled drawers into the unit ensuring they slide smoothly along the rails.

14 15

12 14

Drawers x2

Chelsea Low Sideboard

Assembly Instructions

mocka.co.nz | mocka.com.au