Mocka Kennedy Entertainment Unit Bedienungsanleitung

Phillips & Flathead screwdrivers required

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.

Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain

circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.

Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor

with all furniture sold and we recommend these are used to prevent your product tipping. The fixing

device provided should fit most wall types, but please note that different wall materials may require

different fixing devices from those supplied.

Wall Strap

washer

wall

anchor

safety

strap x1

screw

wall

screw

A B C D E F G HJKL

M N

Hardware Supplied

PQR

dowel

x20

screw

x41

bolt

x24

locking

nut x24

bolt

screw

slide

rail x1

wedge

x12

slide

rail x1

slide

rail x1

slide

rail x1

allen

key x1

bracket

cover

stopper

hinge

small

bolt x16

bracket

screw screw

x10 x12

adjuster

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

washer

x16

Kennedy Entertainment Unit

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Attach 2x brackets (M) to panel [1] and secure with 4x screws (E). Place 2x

covers (N) over them as shown. Attach panel [8] to panel [1] using 2x screws

(S). Attach 1x bracket (M) to panel [2] and secure with 2x screws (E). Place

1x cover (N) over the bracket. Attach the support leg [19] to the underside of

panel [2] with 1x screw (F). Tighten with a screwdriver.

Attach 1x slide rail (H) to panel [5] and secure with 2x screws (E).

Attach 1x slide rail (J) to panel [6] and secure with 2x screws (E).

Tighten with a screwdriver.

H x1 & J x1

Kennedy Entertainment Unit

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Assembly Instructions

Attach 2x brackets (M) to panel [1] and secure with 4x screws (E). Place 2x

covers (N) over them as shown. Attach panel [8] to panel [1] using 2x screws

(S). Attach 1x bracket (M) to panel [2] and secure with 2x screws (E). Place

1x cover (N) over the bracket. Attach the support leg [19] to the underside of

panel [2] with 1x screw (F). Tighten with a screwdriver.

Attach 1x slide rail (H) to panel [5] and secure with 2x screws (E).

Attach 1x slide rail (J) to panel [6] and secure with 2x screws (E).

Tighten with a screwdriver.

H x1 & J x1

Attach panels [5] and [6] to panel [7] using 4x dowels (A) and 4x bolts

(B). Secure with 4x locking nuts (C) and tighten with a screwdriver.

Attach panels [4], [6], [5] and [3] to panel [1] using 8x dowels (A), 8x bolts

(B) and secure with 8x locking nuts (C). Tighten with a screwdriver.

BAB

Kennedy Entertainment Unit

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Assembly Instructions

Slide panels [9] and [10] along the grooves between panels [3], [4], [5]

and [6] to form the back of the unit.

Attach panel [2] to the rest of the unit using 8x dowels (A), 4x bolts (B)

and 4x locking nuts (C). Tighten with a screwdriver.

Kennedy Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe

ASSEMBLY INSTRUCTIONS

mocka.co.nz | mocka.com.au

Slide panels [9] and [10] along the grooves between panels [3], [4], [5]

and [6] to form the back of the unit.

Attach panel [2] to the rest of the unit using 8x dowels (A), 4x bolts (B)

and 4x locking nuts (C). Tighten with a screwdriver.

Attach a leg bracket (R) to each leg [18] using 2x screws (S) and 1x bolt

(G). Tighten with a screwdriver and allen key (L). Attach each leg [18] to

panel [2] using 4x small bolts (Q) and 4x washers (A1) as shown. Tighten

with the allen key (L). Insert the adjuster (U) into the middle support.

Attach 12x wedges (D) to the back of the unit as shown and secure with

12x screws (T). Tighten with a screwdriver.

Front

Back

Front

Kennedy Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910

Attach 1x stopper (O) to door panel [11] using 1x screw (E). Attach 2x

hinges (P) to panel [11] and secure with 4x screws (E). Attach 1x

stopper (O) to door panel [12] using 1x screw (E). Attach 2x hinges (P)

to panel [12] and secure with 4x screws (E).

Secure door panels [11] and [12] to the main unit by attaching the other

end of the hinges (P) with 16x screws (E) as shown.

NOTE: If the doors are uneven or

there is a gap in the middle, loosen

or tighten the screw on the door

hinge until they are sitting flush.

Kennedy Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910

Attach 1x stopper (O) to door panel [11] using 1x screw (E). Attach 2x

hinges (P) to panel [11] and secure with 4x screws (E). Attach 1x

stopper (O) to door panel [12] using 1x screw (E). Attach 2x hinges (P)

to panel [12] and secure with 4x screws (E).

Secure door panels [11] and [12] to the main unit by attaching the other

end of the hinges (P) with 16x screws (E) as shown.

NOTE: If the doors are uneven or

there is a gap in the middle, loosen

or tighten the screw on the door

hinge until they are sitting flush.

Attach 1x stopper (O) to panel [13] using 1x screw (E). Attach side panels

[14] and [15] to panel [13] using 4x bolts (B) and secure with 4x locking

nuts (C). Tighten with a screwdriver. Slide panel [17] along the grooves

between side panels [14] and [15] to form the base of the drawer.

Screw on the back panel [16] using 4x screws (F). Attach 1x slide rail (I)

to panel [14] and 1x slide rail (K) to panel [15] using 4x screws (E).

Tighten with a screwdriver.

Drawer x1

Kennedy Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14

Insert the drawer into the unit at an upwards 45˚angle. See the diagram

above for the correct positioning of the slide rails. If the door is not

catching or sitting flush, twist the end of the cover (N) until it catches on

the stopper (O).

Ensure the drawer slides easily along the rails.

45°

Kennedy Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

13 14

Insert the drawer into the unit at an upwards 45˚angle. See the diagram

above for the correct positioning of the slide rails. If the door is not

catching or sitting flush, twist the end of the cover (N) until it catches on

the stopper (O).

Ensure the drawer slides easily along the rails.

45°

15 16

Attach 1x safety strap (V) to the top of the back side of the unit as shown

using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.

Once assembled lift furniture into place, do not drag. Use a drill to create

a small hole lining up with the top of the safety strap (V). Fasten to wall

using 1x wall plug (X), 1x washer (Z) and 1x wall screw (Y). Ensure unit

is balanced and steady before use. You’re done, enjoy!

Wall Mount

wall

plug

wall

screw

strap

washer

Kennedy Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Inhaltsverzeichnis

Andere Mocka Inneneinrichtung Handbücher

Mocka

Mocka Peyton Bedienungsanleitung

Mocka

Mocka Parker Console Bedienungsanleitung

Mocka

Mocka Dakota Bedienungsanleitung

Mocka

Mocka Chelsea Cabinet Bedienungsanleitung

Mocka

Mocka Vera Bar Stool Bedienungsanleitung

Mocka

Mocka Edmond Bedside Table Bedienungsanleitung

Mocka

Mocka Eclipse Bedside Table Bedienungsanleitung

Mocka

Mocka Denham Bedside Table Bedienungsanleitung

Mocka

Mocka Mischa Bedienungsanleitung

Mocka

Mocka Asta Armchair Bedienungsanleitung

Mocka

Mocka Ida Bedienungsanleitung

Mocka

Mocka Sonata Bed Queen Bedienungsanleitung

Mocka

Mocka Eclipse Bedienungsanleitung

Mocka

Mocka Zander Round Side Table Bedienungsanleitung

Mocka

Mocka Bentley Slim Shelf Bedienungsanleitung

Mocka

Mocka Kent Ladder Bookcase Bedienungsanleitung

Mocka

Mocka Aspen Bedienungsanleitung

Mocka

Mocka Eliza Desk Bedienungsanleitung

Mocka

Mocka Arlo Coffee Table Bedienungsanleitung

Mocka

Mocka Tasman Bedienungsanleitung

Mocka

Mocka Edmond Bedienungsanleitung

Mocka

Mocka Hamptons Bar Stool Bedienungsanleitung

Mocka

Mocka Phoebe Coffee Table Bedienungsanleitung

Mocka

Mocka Bronte Entertainment Unit Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung