Mocka Parker Entertainment Unit Bedienungsanleitung

WARNING: Any furniture that is not anchored to a wall has the potential to tip over

in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the

event of an earthquake. Accordingly, we recommend that all furniture is anchored

to a wall. We supply a free safety wall anchor with all furniture sold and we

recommend these are used to prevent your product tipping. The fixing device

provided should fit most wall types, but please note that different wall materials

may require different fixing devices from those supplied.

For quicker assembly, we recommend the

use of a power drill on a low-speed setting.

A B1 B2 C D

EFI JH

Hardware Supplied

50mm

screw x8

30mm

screw x12

bolt &

nut x38

12mm

screw x16

wall

plug x2

wall

strap x2

14mm

screw x2

25mm

screw x2

50mm

screw x10

slide rail

Phillips & Flathead screwdrivers required

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.

Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

dowel

x24

Parker Entertainment Unit

mocka.co.nz | mocka.com.au

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Attach the leg panels as shown using 8x 50mm screws (B1). Tighten

with a screwdriver.

Attach panel [2] to the leg panels using 12x 30mm screws (B2). Insert 8x

bolts (A) into panel [2]. Tighten with a screwdriver.

Parker Entertainment Unit

mocka.co.nz | mocka.com.au

Assembly Instructions

Attach the leg panels as shown using 8x 50mm screws (B1). Tighten

with a screwdriver.

Attach panel [2] to the leg panels using 12x 30mm screws (B2). Insert 8x

bolts (A) into panel [2]. Tighten with a screwdriver.

Insert 2x bolts (A) and attach 1x slide rail [E1] to panel [4] using 2x

12mm screws (C). Insert 2x bolts (A) and attach 1x slide rail [E3] to

panel [5] using 2x 12mm screws (C). Tighten with a screwdriver.

Attach 1x slide rail [E3] to one side of panel [6] using 2x 12mm screws

(C). Attach 1x slide rail [E1] to the other side of panel [6] using 2x 12mm

screws (C). Tighten with a screwdriver.

ip

Parker Entertainment Unit

mocka.co.nz | mocka.com.au

Assembly Instructions

Attach panels [4], [5], [6] and [7] to panel [3] as shown using 8x dowels

(F) and 8x locking nuts (A). Tighten with a screwdriver.

Insert 4x bolts (A) to the back of panel [3].

Parker Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au

Jolt Wardrobe

ASSEMBLY INSTRUCTIONS

mocka.co.nz | mocka.com.au

Attach panels [4], [5], [6] and [7] to panel [3] as shown using 8x dowels

(F) and 8x locking nuts (A). Tighten with a screwdriver.

Insert 4x bolts (A) to the back of panel [3].

Attach panel [6] to panel [3] sing 2x dowels (F) and 2x 50mm screws (D).

Attach panels [4], [5] and [7] to panel [2] using 8x dowels (A) and 8x

locking nuts (A). Tighten with a screwdriver.

Insert 6x bolts (A) into the back of panel [1].

Parker Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au

910

Slide panel [8] down along the grooves between panels [4] and [5] to

form the back of the unit. Attach panel [1] to panels [4], [6] and [5] using

6x dowels (F) and 6x locking nuts (A). Tighten with a screwdriver.

Attach panels [11], [12] and [13] together using 4x 50mm screws (D). Attach

panel [14] to panel [13] using 2x bolt and nut sets (A). Slide panel [15] along

the grooves between the side panels and attach panels [9]/[10] using 6x

bolt and nut sets (A). Attach 1x slide rail (E2) to panel [11] and 1x slide rail

(E4) to panel [12] using 4x 12mm screws (C). Tighten with a screwdriver.

CE4

Parker Entertainment Unit

Assembly Instructions

mocka.co.nz | mocka.com.au