Modena GM 2400E Betriebsanleitung

User

Manual Book

Meat Grinder

GM 2400E

Thank you for your trust in choosing MODENA products for your household needs. With your

satisfaction as our priority, we constantly aim to deliver stylishly designed products equipped

with state-of-the-art technology to assist you in your daily activities.

This is your guidebook containing everything you need to know about our product. Please reach

out to us if you need further assistance or other information via our Customer Care or our

official website www.modena.com.

CONTENTS

Page

INTRODUCTION

Part 1

: Name of Parts

Part 2

: Precaution

Part 3

: Installation

Part 4

: How to Use

Part 5

: Important Safety Information

Part 6

: Cleaning & Maintenance

Part 7

: Troubleshooting

Part 8

: Specification

The picture is a general overview and is not necessarily the same as the product you receive.

Features and completeness depends on the type of products.

When using this electrical appliance, safety precautions should always be followed, including:

Read all of the instructions.

To avoid electrical shock, do not put the appliance in water, other liquid, or where water may flood the area.

Place the appliance securely in the center of the counter or work space on a flat surface.

This appliance should not be operated by those who have psychological, perceptual or mental disabilities

(including children), or by people with no experience or knowledge, except they have had the supervision and

instruction of the appliance by the intermediary responsible of their safety. It is better to supervise the children.

Disconnect the power plug when the appliance is not in use.

Disconnect the power plug before cleaning the protection components.

Avoid contact with moving parts.

DO NOT push food by hands,always use food pusher. Keep hair, hands, clothing, and utensils away from

moving plates while operating to reduce the risk of personal injury and/or damage to the appliance

Do not use fingers to scrape away food from discharge disc while appliance is operating. It may cause injury.

CAUTION: DO NOT PUT YOUR FINGERS NEAR THE HOPPER OR THE HEAD WHILE IN OPERATION.

Do not use any appliance with a damaged cable or plug, after the appliance malfunctions, or if it is dropped or

damaged in any matter.

Please contact MODENA Call Center for examination and all necessary electrical or mechanical adjustments.

The use of spare-parts not recommended or sold by MODENA may cause fire, electric shock or injury..

Do not use outdoors. This appliance is for household use only. Do not use for industrial purposes.

Do not let cord hang over rge edge of table or counter. Do not let cord come in contact with hot surfaces,

including the stove.

WARNING: The cutting blade is sharp. Handle with care when both using and cleaning.

Do not place near hot gas, electric burner, in an oven, or in a dishwasher.

If motor stalls, turn off immediately and unplug the appliance. To avoid injury, detach meat grinder head then

disassemble and remove the jammed pieces.

Do not use an extension cord with this appliance. However, if one is used, it must have an equal rate of this

appliance.

Part 1: Name of Parts

Part 2: Safety Precaution

The appliance should always be in the “OFF” position before inserting or removing plug from power socket.

Before plugging in, ensure the “ON/OFF” switch is turned to the “OFF” position.

Do not pull on the power cord to disconnect, pull on the head of the plug.

This appliance should not be used for other than the intended use.

Never leave the appliance unattended while it is operating.

After use, there would be a little food left in the grinder head and it is normal. There might be a bit of black

metal powder adhering to the ground food in the end. Please pick them out and throw away. Do not eat them.

To avoid jamming, do not force to operate the unit with excessive pressure.

When the circuit breaker is running, do not switch the appliance on.

When carrying unit, be sure to hold the motor housing with both hands. Do not carry the unit by holding only

the hopper plate or head.

Do not grind hard foods such as bones, nuts, etc.

Do not grind ginger and other materials with hard fiber.

Continuous running of the meat grinder should not be more than 10 minutes before it is used again. It must

cool down for approximately 10 minutes.

Reverse function is prohibited while the appliance is operating. Wait at least one minute until grinder has come

to a complete stop. Otherwise, it may cause an abnormal noise, vibration or an electric spark. This could

damage the product.

The manual book should be kept in good condition and stored in an easily accessible place.

Grinder Features

Part 3: Installation

Ref.

Description

Ref.

Description

Main body/head

Drive gear back bushing

Screw feeder driver

Drive gear

Screw feeder nylon bushing

O-ring for drive gear

Screw feeder/auger

Handle

Square auger stud

Handle screw

Knife

Front flange bushing for drive gear

Grinding plate 3/16” holes

Front flange gasket

Retaining ring

Nylon sparer

Meat pan

Iron sparer

Stomper/food pusher

Snap ring

Stuffing tube set

Front flange screw

Stufing plate

Front flange

Back panel –stainless steel

Knop

Cable holder

Step gear bushing

Power cord

Step gear

Side screw for back panel

Rubber feet

Top cover –stainless steel

Botton cover –stainless steel

Side screw for front panel

Circuit breaker

Motor

Switch

Oil seal

Capacitor

Oil seal bushing

*Stuffing tube size: Grinder 3/8” (10mm), ½” (15mm), ¾” (20mm), 1” (25mm).

BEFFORE OPERATING: Wash all parts of the head in hot soap solution to remove any residue and dirt left

from the manufacturing process. DO NOT PUT PARTS IN DISH WASHER.

Remove Retaining Ring (8), Grinding Plate (7), Knife (6), and Auger (4) from the grinder head (1). Be sure that

the locking screw (not shown) on the side of the motor coupler is backed all the way out. Insert the grinder

head into the motor coupler so that the auger fits properly into the Drive Gear (23). The head should be

positioned upright so that the locking screw can be firmly tightened to hold it in place during operation.

Insert auger (4) into grinder head and turn until the auger slips into the flat shaft of the motor.

Place the knife (6) on square auger stud (5) of the auger (4) with blades facing out.

Place grinding plate (7) on auger stud in front of knife. Make sure notch in plate is on locating stud in head.

Cutting edge of knife should be facing and flush against the grinder plate.

Screw retaining ring (8) onto head until tight. Hand-tighten do not over-tighten. Over-tightening will cause undo

wear on the knife and plate of the grinder. If ring is not tight enough, meat may mash instead of being cut by

the knife. A dull knife or plate will also cause mashing of the meat.

If mashing occurs, disassemble the grinder，remove all meat from grinder and plate, reassemble grinder and

tighten ring tighter than it was previously before beginning to grind meat again.

Insert meat pan (9) into grinder head securely.

CAUTION! Before using the device for the _rst time please make sure to read carefully and thoroughly

through these operating instructions and the safety advice.

Familiarize yourself completely with the functions of the appliance.

GRINDING:

When making burger from wild game we suggest adding a minimum of 10% beef fat to the meat. This will give the

burger moisture, but still not make it fatty. Never use beef suet. Suet is too hard and the burger will be cooked

before the suet melts causing suet particles to remain in the burger.

Cut meat into strips that will easily fit into the grinder head. Meat should be 40° or colder and free of gristle and

sinew. Feed meat slowly into the throat of the head. Use the meat stomper to push meat into the throat of the head.

Allow grinder to do the work. Do not force meat.

NEVER USE FINGERS TO PUSH MEAT INTO HEAD!

Place the meat into freezer for 15-20 min. Grind meat through the coarse plate first. Return meat to freezer. Turn

motor off and unplug the grinder. Then, remove the coarse plate and clean the head from sinew, fat or gristle that

has accumulated during the first grind. Assemble the unit with the fine plate, plug grinder in and regrind the meat.

If meat mashes instead of coming through the plate in "strings”, see (6) under assembly section in this manual.

STUFFING SAUSAGE CASINGS:

When marking sausage, use at least 20% fat with your meal and grind it like burger. Mix the seasoning with the

meat after the first grind and grind for the second time.

For a coarser grind, grind the meat through the 3/16" plate once, then mix the seasoning with the meat. Unplug the

grinder; remove the grinder knife and plate. Install the stuffing plate (12) in place of the knife and plate. Put stuffing

tube in front of stuffing plate and secure with the retaining ring. Slide casings onto stuffing tube making sure to

leave the end of the tube open. Turn the grinder on and put the meat into the head until meal is at the end of the

stuffing tube. Stop grinder and pull casing out past the opening of stuffing tube about “1". Tie a knot in the casing.

Restart the grinder. This procedure will keep the casing from filling up with air in first stuffing. Continue to feed meat

into the head until the casing is filled.

When carrying the unit, be sure to hold motor housing with both hands. Do not hold or carry by the hopper

plate.

Make sure all parts are tightly assembled. Loose parts will cause food to get caught and clog up the grinder.

Always turn the unit ON before inserting food.

Process a small amount of fat from the meat through the meat grinder before grinding to lubricate the grinding

mechanism.

Cut food into strips or cubes slightly smaller than the opening on the feeding tube.

Do not grind hard foods such as bones.

Do not grind ginger and other materials with hard fiber.

Part 4: How to Use

Part 5: Important Safety Information

Do not use the unit for more than 20 minutes without interruption. If longer use is necessary, allow unit to cool

down thoroughly before reusing it.

To avoid jamming, do not apply excessive pressure while operating.

Grinding bread pieces may help to remove food residue left in the meat grinder after use.

Chill meat before grinding to reduce the loss of juices.

Refrigerate ground meat immediately and cook within 24 hours.

Make sure food is free of bone, tough tendon, nutshells, etc. before grinding.

Do not use food pusher on bread crumb. The bread crumb will enter without being pushed.

When making bread crumbs, only use the coarse grinding disc.

Never try to undo the parts or to repair the unit by yourself. Please contact MODENA Call Center.

When switching from ON to OFF then to REVERSE or vice versa, wait for approximately 6 seconds to assure

that the motor has stopped completely.

To maintain the freshness of your ground meat for up to five times longer traditional food storage methods, it is

recommended to use vacuum sealers or vacuum packaging systems.

Before cleaning, assembling or disassembling the unit. Make sure the grinder motor is OFF and the motor has

stopped completely.

Unplug the appliance from the power outlet. Turn the grinder head until you can remove the cap.

Wash each part in warm soap solution. Use care when handling the sharp blades.

Note: Do not wash any parts in the dishwasher or use abrasive cleaning agents or cloths when cleaning.

Bleaching solutions containing chlorine will discolor aluminum surfaces. Thinners and benzenes will crack or

change the color of the unit.

Wipe motor housing with a damp cloth. Do not immerse in water.

Dry all parts thoroughly before storing.

Coat screw feeder, cutting blade, and cutting plates with vegetable oil after washing and drying. Note: The oil

will keep parts lubricated.

If your unit fails to operate, contact MODENA Call Center. If meat is mashed instead of extruding in strings from the

grinding plate, chill the meat to 40°, and check the plate and blade are properly installed, and check the rings to

installed at the back of screw feeder. A dull knife or plate will also cause mashing of the meat.

For an overheated plug or grinder housing discontinue use and contact MODENA Call Center.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.

CIRCUIT BREAKER INFORMATION:

This appliance is equipped with a circuit breaker to protect the unit. In the event of a power outage, irregular

operation or overheating, the motor will immediately shut down to prevent damage. If this should happen, follow the

steps:

Step 1: Turn the switch off.

Step 2: Unplug the appliance.

Step 3: Check inside of grinding unit and remove any obstruction.

Step 4: Wait for 1 or 2 minutes, and plug the appliance into the power socket.

Step 5: Push Restart Button and release. (Located at the back panel of grinder, 27).

Step 6: Turn the switch on.

Step 7: Resume operation.

The mentioned troubles are just for reference. If any failure occurs, please stop using, and contact

MODENA Call Center to check and repair.

Part 6: Cleaning & Maintenance

Part 7: Troubleshooting

Meat Grinder - GM 2400E

Meat Grinder

Electric

Stainless steel

260 W ; 220V/50Hz

Specifications of this appliance may change without notice to improve the quality of the product.

Pictures in this manual are schematic and may not match your product exactly. Values stated on the appliance

labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant

standards. Depending on operational and environmental conditions of the appliance, values may vary.

Part 8: Troubleshooting

11/20

Inhaltsverzeichnis

Andere Modena Fleischwolf Handbücher

Modena

Modena GM Series Bedienungsanleitung

Beliebte Fleischwolf Handbücher anderer Marken

Klarstein

Klarstein Mett Max Bedienungsanleitung

Grizzly

Grizzly H7778 Bedienungsanleitung

Hobart

Hobart 4822 Bedienungsanleitung

Tasin

Tasin TS-108 Bedienungsanleitung

Adler Europe

Adler Europe AD 48 Bedienungsanleitung

camry

camry CR 4802 Bedienungsanleitung

Bake Max

Bake Max BMMG001 Bedienungsanleitung

Lumme

Lumme LU-MG2113A Bedienungsanleitung

Weston

Weston 35-3201 Bedienungsanleitung

Lumme

Lumme LU-2101 Bedienungsanleitung

GoWISE USA

GoWISE USA GW88012 Bedienungsanleitung

MPM

MPM MMM-07M Bedienungsanleitung

Weston

Weston 82-0101-W Bedienungsanleitung

BIRO

BIRO 3334SS Service-Handbuch

HOFFEN

HOFFEN MG-0440 Bedienungsanleitung

Scarlett

Scarlett SC-MG45M18 Bedienungsanleitung

Adcraft

Adcraft MG-1 Bedienungsanleitung

Johnson

Johnson tomit Bedienungsanleitung