Moeller SmartWire Benutzerhandbuch

SmartWire Startup Guide V1.02

The document can be found under the following path:

ftp://ftp.moeller.net/SMARTWIRE/ENGLISH/01_PRODUCT/08_STARTUP_GUIDE

{ DOWNLOAD }

All rights, including those of translation, reserved. No part of this manual may be

reproduced, stored in a retrieval system, or transmitted in any form or by any means,

electronic, mechanical, photocopying, micro-filming, recording or otherwise, without

the prior written permission of Moeller GmbH, Bonn.

Changes:

V1.0 ÆV1.01 Moeller logo updated

V1.01 ÆV1.02 Screenshots updated

SmartWire Startup Guide V1.02

Contents

1Introduction...................................................................................................... 4

2System components for motor starters with SmartWire.............................. 5

3Connections on the motor starter .................................................................. 7

4Assembling a motor starter row..................................................................... 8

5Electrically commissioning SmartWire........................................................ 10

6SmartWire integration for XC100/200 via Profibus DP................................ 12

6.1 PLC connection.............................................................................................................12

6.2 Installing the GSD file ...................................................................................................13

6.3 Creating a program in easySoft CoDeSys....................................................................14

6.4 Setting for Profibus node monitoring.............................................................................21

6.5 Diagnostics ...................................................................................................................22

6.5.1 XC100/200 system diagnostics................................................................................................... 22

6.5.2 Profibus DP diagnostics.............................................................................................................. 24

6.6 Example program for XC200 (SWIRE-XC200-ProfibusDP.pro)....................................27

7SmartWire integration for XC100/200 via CANopen.................................... 28

7.1 PLC connection.............................................................................................................28

7.2 Installing the EDS file....................................................................................................29

7.3 Creating a program in easySoft CoDeSys....................................................................29

7.4 Settings for CANopen node monitoring with Node guarding.........................................33

7.5 Settings for the CANopen Heartbeat node monitoring..................................................34

7.6 CANopen slave monitoring ...........................................................................................35

7.7 Example program for XC200 (SWIRE-XC200-CANopen.pro)......................................39

8SmartWire integration for easy800 via easyNET......................................... 40

9SmartWire integration for ECP4 via CANopen ............................................ 40

10 SmartWire integration for S7-300 via Profibus DP...................................... 40

SmartWire Startup Guide V1.02

1 Introduction

SmartWire enables switching devices to be connected to a PLC without the need for

any complex control circuit wiring. The control wiring between the PLC and the

switchgear is replaced by the plug-in SmartWire module and pre-assembled

connection cables. The wiring requirement is drastically reduced and thus makes

wiring errors a thing of the past. This saves time and money during mounting,

commissioning and troubleshooting during operation.

SmartWire is an addition to the well-established range of Moeller switchgear and is

designed to be an accessory for standard devices. The flexibility of the switchgear is

fully retained since all known system accessories can still be used. The use of

standard devices reduces the stock-keeping costs required and ensures the

worldwide availability of replacement parts.

SmartWire Startup Guide V1.02

2 System components for motor starters with SmartWire

(4)

(6)

(1)

(5) (2)

(3)

The following pages describe the setup, configuration and function of the SmartWire

system using eight Moeller motor starters with the "SWIRE-DIL" SmartWire module

for DILM contactors.

The motor starters presented here consist of 5 components:

1) PKZM motor-protective circuit-breaker

2) Connection element

3) DILM contactor

4) Tool-less plug connector

5) SmartWire module for DILM "SWIRE-DIL"

6) SmartWire connection cable "SWIRE-CAB-xxx"

SmartWire Startup Guide V1.02

A motor starter is assembled simply from these 5 components.

Before fitting the SWIRE-DIL to the corresponding contactor, it must be ensured that

the position of the terminal pin is set correctly.

DILM contactor size 1 DILM contactor size 2

SmartWire Startup Guide V1.02

3 Connections on the motor starter

L1 L2 L3

Wiring for motor

feeder

(AC load circuit)

Incomer wiring

(AC load circuit)

X1/X2 optional wiring

NHI (auxiliary contact

for PKZM)

X3/X4 for opening

the contactor control circuit

(Jumpered as standard)

The SWIRE-DIL has 4 screw terminals, X1/X2 and X3/X4.

X1/X2 is provided with a digital input for isolated contacts. This input is designed for

connecting the NHI auxiliary contact of the PKZ and thus indicates the status of the

PKZ (off/tripped and on) to the SWIRE-DIL.

A jumper (fitted as standard) at X3/X4 closes the control circuit for the contactor.

Opening the connection at X3/X4 makes it possible to interrupt the circuit for the

contactor (independently of the SWIRE-DIL control logic). X3/X4 enables, for

example, the electrical interlock of the contactor for a reversing starter combination.

SmartWire Startup Guide V1.02

4 Assembling a motor starter row

The assembly of the system couldn't be easier. The motor starters are firstly fitted in

succession onto the mounting rail. The NHI may have been installed on the PKZ

beforehand and the connection cables connected to the terminal X1/X2.

All SWIRE-DILs are then interconnected using the SmartWire connection cables. The

SWIRE-CAB-008 is recommended for connecting two starters with (DILM7…11

contactors). If adjacent contactors are not identical, e.g. DILM9 next to DILM15 or

vice versa, the next larger connection cable SWIRE-CAB-011 is recommended.

SmartWire Startup Guide V1.02

The next step involves the installation of the fieldbus gateway. The following

interfaces are possible at present:

1) SWIRE-GW-DP Æfor connecting to Profibus DP V0

2) easy223-SWIRE ÆCANopen mode: for connecting to a CANopen master

3) easy223-SWIRE ÆeasyNET mode: for connecting to an easyNET for easy800

Ideally, the fieldbus gateway is positioned approx. 10 mm away from the first starter.

SWIRE-CAB-015 is recommended as the SmartWire cable.

The gateway requires two operating voltages:

a) UInterface : used for supplying the gateway and the SmartWire modules.

b) UAux : supply voltage here for the contactors on the motor starter

ATTENTION!

The power supply must be provided with appropriate fuse protection.

a) UInterface : 1A fuse

b) UAux : 3A fuse

Further information on this is provided in the technical descriptions (AWBs) of the

SmartWire components.

24VDC power

supply

for SWIRE devices

24VDC incomer

for DILM contactors

Distance from gateway to

the first starter, ideally

approx. 10mm

SmartWire Startup Guide V1.02

5 Electrically commissioning SmartWire

The SmartWire system which is connected to the higher-level PLC via the fieldbus

gateway in place can be configured independently of the controlling PLC and

commissioned.

After the power supply is switched on, the SmartWire gateway always checks the

connected SmartWire modules and compares this with the internally stored

configuration. The SmartWire gateway is factory set without a reference

configuration. In other words, it does not expect to find any modules.

In this example with 8 motor starters and thus also SmartWire modules, the

SmartWire gateway will detect the deviation when the first module is checked. This is

indicated by the regular flashing of the SmartWire LED on the gateway and on the

first SWIRE-DIL. The LEDs of SWIRE-DILs 2-7 flash in pulses.

This means that they are in operation but have not yet been accessed by the

gateway, since the first module does not match the reference configuration in the

SmartWire gateway.

The currently connected configuration can be transferred by pressing the

configuration button on the gateway. This must be held down > 1 second. If this time

is exceeded, the Ready LED will change from slow to fast flashing and will thus

indicate that the configuration process has been initiated. The configuration button

can then be released.

The gateway then carries out an automatic configuration so that all stations are

addressed in turn (in this case 1-8).

Inhaltsverzeichnis

Andere Moeller Steuerungssystem Handbücher

Moeller

Moeller XControl XC600 Stücklistenhandbuch

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung