Monarch 9406 Technisches Dokument
Monarch
®
9406™
Thermal Printer
Equipment Manual
TC9406EM Rev. B 8/94 ©1994 Monarch Marking Systems, Inc. All rights reserved.
Each product and program carries a respective written
warranty, the only warranty on which the customer can rely.
Monarch reserves the right to make changes in the product
and the programs and their availability at any time and without
notice. Although Monarch has made every effort to provide
complete and accurate information in this manual, Monarch
shall not be liable for any omissions or inaccuracies. Any
update will be incorporated in a later edition of this manual.
WARNING
This equipment can interfere with radio communication if not installed
and used in accordance with the instruction manual. It has been tested
and found to comply with the limits for a Class Acomputing device
pursuant to FCC Rules, Subpart B, Part 15, which provide reasonable
protection against such interference when operated in a commercial
environment. Operation in a residential area is likely to cause
interference which the user must correct at their own expense.
CANADIAN D.O.C. WARNING
This digital apparatus does not exceed the Class Alimits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la
classe Aprescrites dans le Réglement sur le brouillage radioélectrique
édicte par le ministère des Communications du Canada.
WARNING
The power supply cord is intended to serve as the disconnect device.
The socket-outlet shall be near the equipment and shall be easily
accessible.
WARNUNG
Der Stromversorgungskabel dient als abschaltvorrichtung. Die
Steckdose soll in der Nahe der Einheit und liecht zunganglich liegen.
Trademarks
Monarch is a registered trademark and 9406 is a trademark of Monarch Marking
Systems, Inc.
Preface
This manual contains information about the general setup and
maintenance of the Monarch®9406™printer.
Other 9406 manuals include:
Read this First
Explains how to unpack and install
the printer and print a test label.
Operator’s Handbook
Explains how to set up the printer,
enter data, and print labels.
System Administrator’s
Guide
Explains designing formats,
communications, and message
structures for sending formats and
batch data online.
Messages Manual
Lists error messages and what
action you should take (if any).
Graphics Manual
Explains how to create logos and
other graphic images for printing on
your 9406 printer.
Preface
i
9406 Equipment Manual
ii
Table of Contents
1. Supplies ...........................................................................1-1
Loading or Changing Supplies...................................1-2
Removing Supplies....................................................1-8
Supply Loading Diagram..........................................1-12
Setting the Supply Type Option................................1-13
2. The Ribbon ......................................................................2-1
Loading or Changing the Ribbon ...............................2-1
Removing the Ribbon.................................................2-8
Setting the Ribbon Option........................................2-11
3. Cleaning the Printhead and Platen Roller....................3-1
4. Replacing the Fuse.........................................................4-1
5. Troubleshooting..............................................................5-1
6. Specifications..................................................................6-1
Printer.........................................................................6-1
Supplies......................................................................6-2
Table of Contents
iii
9406 Equipment Manual
iv
1. Supplies
The 9406 printer prints labels that can be fed out the exit chute
• in one strip (
Continuous
Printing
) removed when pulled
up and to the left at the tear bar.
• one at a time while the backing paper rewinds inside
the printer (
On-Demand
Printing
).
This chapter describes
• loading or changing supplies.
• removing supplies.
• supply loading diagram.
• setting the supply type option.
Supplies
1-1
Loading or Changing Supplies
1. Turn off the power.
2. Grasp the printer cover on both sides and lift it up.
3. Pull the exit chute door open.
Printer
Cover
Exit Chute
Door
9406 Equipment Manual
1-2
4. Move the printhead lever as shown to open the printhead.
5. If you are changing supplies, remove the current supplies.
See "Removing Supplies" for more information.
6. If necessary, change the ribbon. See "Loading or
Changing the Ribbon" for more information.
Printhead
Lever
Supplies
1. Supplies
1-3
7. Slide the supply edge guide and the ribbon supply guide to
the top of the roller.
8. Remove the seal from the new supplies and place the roll
on the supply platter.
Ribbon
Supply
Guide
Exit
Chute
Door
Supply
Edge
Guide
Supply
Platter
9406 Equipment Manual
1-4
Andere Handbücher für 9406
1
Inhaltsverzeichnis
Andere Monarch Drucker Handbücher
Monarch
Monarch Pathfinder Ultra Platinum 6039 Bedienungsanleitung
Monarch
Monarch PATHFINDER Ultra 6030TM Service-Handbuch
Monarch
Monarch Pathfinder Ultra Silver 6032 Bedienungsanleitung
Monarch
Monarch Sierra Sport 2 Bedienungsanleitung
Monarch
Monarch 9403 Service-Handbuch
Monarch
Monarch Pathfinder Ultra Silver 6032 Bedienungsanleitung
Monarch
Monarch 9400 Series Service-Handbuch
Monarch
Monarch 9403 Bedienungsanleitung
Monarch
Monarch Monarch 9433 SNP Service-Handbuch
Monarch
Monarch 9400 Series Bedienungsanleitung
Monarch
Monarch 9820 Bedienungsanleitung
Monarch
Monarch 9416 Technisches Dokument
Monarch
Monarch 94 Series Bedienerhandbuch
Monarch
Monarch 9414 Bedienungsanleitung
Monarch
Monarch MPCL II Bedienungsanleitung
Monarch
Monarch 6030 Bedienungsanleitung
Monarch
Monarch 9445 Technisches Dokument
Monarch
Monarch 9855 Bedienungsanleitung
Monarch
Monarch Paxar Sierra Sport 3R 9430 Bedienungsanleitung
Monarch
Monarch 9906 Bedienungsanleitung
