Monoprice 24280 Bedienungsanleitung

MONOPRICE

Blackbird™ HDMI® Bi-Directional Switch

P/N 24280

User's Manual

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

This device is intended for indoor use only.

Do not expose this device to water or moisture of any kind. Do not place drinks or

other containers with moisture on or near the device. If moisture does get in or on

the device, immediately unplug it from the power outlet and allow it to fully dry

before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet

hands.

Do not expose this device to excessively high temperatures. Do not place it in, on,

or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct

sunlight.

Prior to operation, check the unit and power cord for physical damage. Do not use if

physical damage has occurred.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

Unplug this device from the power source when not in use.

Take care to prevent damage to the power cord. Do not allow it to become

crimped, pinched, walked on, or become tangled with other cords. Ensure that the

power cord does not present a tripping hazard.

Never unplug the unit by pulling on the power cord. Always grasp the connector

head or adapter body.

Ensure that power is turned off and disconnected before making any electrical

connections.

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or

detergents. For stubborn deposits, moisten the cloth with warm water.

This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

INTRODUCTION

Thank you for purchasing this Blackbird™ HDMI® Bi-Directional Switch! This switch

functions as a 2x1 switch, as well as a 1x2 splitter, depending on how it is connected. It

supports 3D video, multichannel audio, and is compliant with the HDMI 1.4 specification.

FEATURES

Functions as a 2x1 switch or 1x2 splitter

Supports 3D video

Compliant with the HDMI® 1.4 specification

Supports high-definition multichannel audio

Can be powered using a USB power source

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-

6pm PT) or via email at [email protected]

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x HDMI® bi-directional switch

1x User's manual

SAMPLE CONNECTION DIAGRAM

INSTALLATION

2x1 Switch

Perform the following steps to install this device as a 2x1 Switch.

1. Ensure that all equipment to be connected is powered off and unplugged from its

power source.

2. Note that one side of the switch has a single HDMI® port, while the other side has

two HDMI ports. Using a High Speed HDMI Cable (not included), plug one end into

the HDMI input on your television, then plug the other end into the side with a

single HDMI port.

3. Using a High Speed HDMI Cable (not included), plug one end into one of the HDMI

ports on the side with two ports, then plug the other end into the HDMI output on

one of your video source devices. Repeat for the second video source device.

4. (Optional) Using a mini USB cable (not included), plug the cable into the USB/Power

jack on the switch, then plug the other end into a USB power source (not included).

5. Plug in and power on all connected equipment. Start video playback on each source

device. Verify that you can see video on the display and that you can switch

between the two source devices using the 1/2 switch.

1x2 Splitter

Perform the following steps to install the switch as a 1x2 Splitter.

1. Ensure that all equipment to be connected is powered off and unplugged from its

power source.

2. Note that one side of the switch has a single HDMI® port, while the other side has

two HDMI ports. Using a High Speed HDMI Cable (not included), plug one end into

the HDMI input on one of your televisions, then plug the other end into one of the

HDMI ports on the side with two ports. Repeat for the other television.

3. Using a High Speed HDMI Cable (not included), plug one end into the HDMI port on

the side with a single port, then plug the other end into the HDMI output on your

video source device.

4. (Optional) Using a mini USB cable (not included), plug the cable into the USB/Power

jack on the switch, then plug the other end into a USB power source (not included).

5. Plug in and power on all connected equipment. Start video playback on the source

device. Verify that you can see video on both displays. Note that the 1/2 switch has

no effect when configured as a splitter.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any

questions you may have about installation, setup, troubleshooting, or product

recommendations. If you ever need assistance with your new product, please come online

to talk to one of our friendly and knowledgeable Tech Support Associates. Technical

support is available through the online chat button on our website www.monoprice.com

during regular business hours, 7 days a week. You can also get assistance through email by

sending a message to tech@monoprice.com

REGULATORY COMPLIANCE

Notice for FCC

Modifying the equipment without Monoprice’s authorization may result in the equipment no

longer complying with FCC requirements for Class B digital devices. In that event, your right to use

the equipment may be limited by FCC regulations, and you may be required to correct any

interference to radio or television communications at your own expense.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

Notice for Industry Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

Blu-ray Disc™and Blu-ray™are trademarks of the Blu-ray Disc Association.

Inhaltsverzeichnis

Andere Monoprice Schalten Handbücher

Monoprice

Monoprice PID 10530 Bedienungsanleitung

Monoprice

Monoprice 38295 Bedienungsanleitung

Monoprice

Monoprice HD-411E3 Bedienungsanleitung

Monoprice

Monoprice 38161 Bedienungsanleitung

Monoprice

Monoprice 36652 Bedienungsanleitung

Monoprice

Monoprice Blackbird 39666 Bedienungsanleitung

Monoprice

Monoprice 31056 Bedienungsanleitung

Monoprice

Monoprice 15261 Bedienungsanleitung

Monoprice

Monoprice Blackbird 39671 Bedienungsanleitung

Monoprice

Monoprice PID 11752 Bedienungsanleitung

Monoprice

Monoprice Blackbird 31057 Bedienungsanleitung

Monoprice

Monoprice 36737 Bedienungsanleitung

Monoprice

Monoprice Blackbird Bedienungsanleitung

Monoprice

Monoprice 30919 Bedienungsanleitung

Monoprice

Monoprice 38298 Bedienungsanleitung

Monoprice

Monoprice MD-415ARC Bedienungsanleitung

Monoprice

Monoprice Blackbird 21614 Bedienungsanleitung

Monoprice

Monoprice Blackbird 36632 Bedienungsanleitung

Monoprice

Monoprice 36650 Bedienungsanleitung

Monoprice

Monoprice 38296 Bedienungsanleitung

Monoprice

Monoprice DRM-1712F+ Bedienungsanleitung

Monoprice

Monoprice Blackbird 36633 Bedienungsanleitung

Monoprice

Monoprice 8462 Bedienungsanleitung

Monoprice

Monoprice 3407 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung