Monster GLO Bedienungsanleitung

Please Call:

Please do not return this

product to the store.

FOR QUESTIONS

OR TECHNICAL

SUPPORT

1-800-976-0677

Weather Resistant

Lantern Speaker

TABLE OF CONTENTS

Warning & FCC Statement

Safety Instructions

New Features

Unpacking

Speaker Component

Getting Started

Charging Battery

3.5 MM Aux Input

Bluetooth Connection

NFC Connection

Replacing Battery

Specifications

Limited Warranty

WARNING

A lightning flash and arrowhead within an equilateral triangle denotes

the presence of insulated “dangerous voltage” within the product’s

enclosure. The voltage may be of sufficient magnitude to constitute a

risk of electric shock to persons who come into contact with it.

An exclamation point within an equilateral triangle denotes the

presence of important operation & maintenance/service instructions.

FCC WARNING STATEMENT

PREVENT FIRE AND SHOCK HAZARDS. DO NOT USE EXTENSION

CORDS OR OUTLETS THAT EXPOSE PLUG BLADES. DO NOT

EXPOSE CABLES AND PLUGS TO RAIN OR MOISTURE.

DO NOT ATTEMPT TO PERFORM ANY SERVICING THAT IS NOT

INCLUDED IN THE OPERATING INSTRUCTIONS. DO NOT

ATTEMPT TO REPLACE THE BATTERY, AS INCORRECT

INSTALLATION CAN CAUSE FIRE OR EXPLOSION. FOR SERVICE,

CONTACT QUALIFIED SERVICE PERSONNEL.

DO NOT REMOVE COVER OR BACK OF PRODUCT. THERE ARE

NO USER-SERVICEABLE PARTS INSIDE. ATTEMPTING TO

MODIFY CONTROLS OR PERFORMANCE BEYOND

MANUFACTURER SPECIFICATIONS MAY RESULT IN HAZARDOUS

EXPOSURE TO RADIATION.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. This equipment

has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches)

during normal operation.

IMPORTANT SAFETYINSTRUCTIONS

1. Read all instructions and save them for personal reference in the future.

2. Follow all directions for operating the product.

3. Heed all warnings on the product and in the operation instructions.

4. Clean with a dry cloth only. Always unplug the product from any power

source before cleaning.

5. Do not use third-party attachments or non-recommended

accessories with this product.

6. Do not place product on an unstable surface, such as a cart,

stand, tripod, table, etc. Unstable surfaces may cause the

product to fall and cause serious injury to people and serious

damage to the product. Follow all manufacturer instructions for

mounting and accessories.

7. Do not block or cover ventilation slots. Openings in the product cabin ensure

reliable operation and prevent overheating. Avoid placing on beds, sofas, and

rugs, or mounting on racks or bookcases, unless proper ventilation is provided.

8. Do not use plug incorrectly. The product may come with a polarized,

alternating-current line plug (one blade is wider/larger than the other). This is a

safety feature: the plug will only go into outlet receptacles one way. Do not force

the plug. If the plug does not fit, contact your electrician to replace the outlet.

9. Prevent power cord hazards. Route cords to avoid walking on them or pinching

them, especially at plug ends and connection points to the product & power outlets.

10. Unplug power cord when not in use. The product should not be plugged into a

power source when not in use for long periods of time.

11. Do not use this product near bodies of water. The product is not waterproof

and cannot be fully submerged in water. Power cords and electric currents should

never be exposed to water.

12. Do not set up near heat sources. Avoid radiators, stoves, heat registers,

amplifiers, and other devices that produce heat. Avoid long exposure to sunlight

and high temperatures.

13. Refer all service to qualified personnel. If the product becomes damaged

during use or encounters a malfunction, contact qualified service personnel. Do

not attempt to service yourself.

14. To use wirelessly, disconnect AC plug completely. The plug must be

completed disconnected from the power outlet.

NEW FEATURES

EZ-PLAY WIRELESS CONNECTION (ADDITIONAL SPEAKERS SOLD SEPARATELY)

IPX5 WATER RESISTANCE

LED LIGHT PANELS

The Monster GLO speaker has two LED light panels facing opposite directions. Use the

panels to light up the night, or add some color and ambience to festivities. Change

colors, brightness, and light duration to suit your personal needs.

• Press the LIGHT button to cycle ON/OFF and LED brightness levels

(25%, 50%, 75%, 100%)

• Press and hold the LIGHT button to turn off the LED panels

• Press the COLOR/TIMER button to cycle color modes (WHITE, GREEN, RED,

DARK BLUE, YELLOW, LIGHT BLUE, PURPLE, and CHROMA)

• Press and hold the COLOR button to activate the light timer (2H, 4H, 6H, 8H)

As rated according to International Protection Marking (IP Code), the Monster GLO is

rated IPX5 for water resistance capable of withstanding exposure to water. This makes

the Monster GLO safe in light rain, splashing water, and even around the pool (but not IN

the pool!).

The Amber RX LED will solid on second speaker

The White TX LED will solid on first speaker

Receiving speaker

Transmitting speaker

1. Press the button to turn on the first speaker, the Bluetooth LED and

EZ-Play’s Tx White LED will slow flash.

Press and hold the key for 2 seconds and the White LED

will begin to flash rapidly.

2. On additional EZPLAY speaker**, press the key to turn on the

second speaker, the Blue LED and EZ-Play’s Tx White LED will flash slowly.

Press and release the button and the EZ-Play’s RX (Amber LED)

will beging to flash slowly.

3. Press and hold the key for 2 seconds and the Amber LED

will begin to flash rapidly.

4. Congratulations! You have

successfully paired between

the 2 speakers.

5. Repeat steps 1 - 3 to add

additional speakers. You can

connect up to 8 speakers

total.

EZ-Play Function Note:

• When speakers successfully connect, the same audio will play through all the speakers.

• The Monster GLO speakers only need to be synced once and will automatically connect to each other when both are turned on.

• When the speaker is used as a receiving unit the AUX and Bluetooth features will be disabled.

UNPACKING

This box includes the following items:

• Monster GLO speaker

• AC Power Cable

• Audio Cable

• User Manual (incl. Limited Warranty Statement)

• Quick Start Guide

• Wall Mount

If any items are missing, contact our customer service team at 1.800.976.0677.

1. AUX input

2. AC power input

3. Power ON/OFF

4. Volume DOWN/UP

5. Bluetooth/AUX pairing

6. EZ-Play Pairing

SPEAKER COMPONENTS

7. Color/Timer Setting

8. Light Setting

9. Handle

10. LED Light Panel

GETTING STARTED

• Connect the AC cable to the speaker.

• Plug the AC cable into a wall outlet.

• Press the Power button to turn the speaker ON

(RED LED will turn on, and voice confirmation).

• Speaker will enter Bluetooth pairing mode

(BLUE LED will flash).

• If 3.5mm AUX cable is plugged in, speaker will automatically enter AUX mode.

(GREEN LED will turn on)

CHARGING BATTERY

BEFORE FIRST USE: Charge the unit for 6 hours.

• While charging, the RED LED indicator will flash slowly.

• When the unit is fully charged, the RED LED

indicator will turn ON.

• When the battery is low, the RED LED indicator

will flash rapidly.

• Make sure Bluetooth function is enabled on your device.

• Place Bluetooth device and speaker within pairing distance (~3 ft.).

• Press and hold Bluetooth button for 3

seconds to enter pairing mode

(BLUE LED will fast flash).

• Search for Bluetooth connections on

your device. Select “Monster GLO”.

• Speaker will confirm connection with

audible sound (BLUE LED turns solid).

BLUETOOTH CONNECTION

NFC CONNECTION

• Ensure Bluetooth function is enabled in your speaker.

• Turn on NFC on your NFC-compatible device.

• Tap your NFC-compatible device onto the speaker’s NFC logo.

• When paired, BLUE LED will stop flashing and remain steady.

(DEVICE MUST SUPPORT NFC FUNCTION)

3.5MM AUX INPUT

• Plug a 3.5mm cable into the AUX input. Speaker will

automatically turn off Bluetooth function and switch

to AUX.

• Connect any audio device to the 3.5mm audio jack

to play audio through the speaker.

• Control volume on the speaker or use the

connected device’s playback functions.

SPECIFICATIONS

Input(s) Bluetooth | AUX | NFC | EZ-Play

Buttons Power, EZ-Play, Bluetooth, Volume,

Color/Timer, Light

LED Indicators Power, Transmit, Receive, Bluetooth, Light, Timer

Battery 6600mAh (3 x 2200mAh)

Power Input AC

Power Saving Auto-sleep feature will activate after 15 minutes if there is no

activity to the speaker.

Speaker Output 10W x 2

Driver Layout 3” Driver (x2), Passive Radiator (x2)

THD + Noise <10%

Cabinet Material Plastic

Dimensions (W x H x D) 12.09” x 8.11” x 8.11”

Weight 5.4 lbs.

General

Key

Operating Temp

Operating Temperature Range 32F° - 104F°

Operating Humidity Range 40~90% RH

Storage Temperature Range -13F° to 158F°

Power On / Off

EZ-PLAY

Bluetooth

Volume DOWN (-)

Volume UP (+)

Light

Color/Timer

Key

1. Short Press EZ-PLAY key to switch TX/RX mode

2. Press and hold EZ-PLAY key for 3 seconds to enter TX

pairing or RX pairing status in TX mode or RX mode

1. Press and hold for 2 seconds to enter Bluetooth Pairing mode;

2. Press and hold for 8 seconds to clear BT Pairing information

Press to decrease speaker volume

Press to increase speaker volume

1. Press LIGHT key to adjust brightness: 100%, 75%,

50%, 25%, OFF.

2. Press and hold LIGHT key for 3 seconds to turn light OFF.

3. When light is OFF, press LIGHT key to turn light ON.

1. Press COLOR/TIMER key to change color: Chroma, Red,

Dark Blue, Light Blue, Amber, Green, White, Purple.

2. Press and hold COLOR/TIMER key for 3 seconds to adjust

light timer duration: 2 hours, 4 hours, 6 hours, 8 hours.

Press to turn the speaker ON / Press and hold to turn speaker OFF

RED Power LED

Red Charging LED

Will stay on for 3s then turn off

Unit in Standby mode

Fully charged

Low in Battery indication

Blue Bluetooth LED

Charging in progress

Unit is connected with BT device

Unit is in BT waiting mode

EZ-Play LED

Unit is in BT pairing mode

EZ-Play Speakers connected

No connection / Lost connection

Off

Solid

Fast Flash

Slow Flash

Steady On

Slow Flash

Fast Flash

Steady On

Slow Flash

Fast Flash Scan Transmit unit signal / send signal

to receive unit (connection request)

LED Status Indicators

Connections

3.5mm AUX In x 1

Bluetooth

Bluetooth Version 3.0

Bluetooth Profile A2DP, AVRCP

Bluetooth Range 10m (33ft.)

White/Amber

SPECIFICATIONS (continued)

MNGLOW-S

Andere Handbücher für GLO

Inhaltsverzeichnis

Andere Monster Sprecher Handbücher

Monster

Monster turbine pro Bedienungsanleitung

Monster

Monster Turbine pro MH TBB-P IE CPR Leitfaden

Monster

Monster SuperStar Leitfaden

Monster

Monster ClarityHD 100 Bedienungsanleitung

Monster

Monster BLASTER 2MNSK0928 Leitfaden

Monster

Monster SOLAR X MNSOLX-BLK Bedienungsanleitung

Monster

Monster SuperStar MS11901 Bedienungsanleitung

Monster

Monster ROCKIN ROLLER PRO Bedienungsanleitung

Monster

Monster Trio Series Bedienungsanleitung

Monster

Monster Superstar S320 Bedienungsanleitung

Monster

Monster DECORA MNDECORA-HZL Bedienungsanleitung

Monster

Monster GLO Bedienungsanleitung

Monster

Monster KATANA Bedienungsanleitung

Monster

Monster Superstar Hotshot Bedienungsanleitung

Monster

Monster Nomad Bedienungsanleitung

Monster

Monster Solara Series MNSOL-BLK Bedienungsanleitung

Monster

Monster GLO2 Bedienungsanleitung

Monster

Monster ClarityHD Micro Installationsanleitung

Monster

Monster Tower of Music 2 Bedienungsanleitung

Monster

Monster Rockin' Roller Bedienungsanleitung

Monster

Monster Precision Micro Bluetooth 100 Bedienungsanleitung

Monster

Monster MS22111 Bedienungsanleitung

Monster

Monster Rockin Roller 3 Bedienungsanleitung

Monster

Monster PowerNet 200 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung