Monster GLO Bedienungsanleitung

Please Call:

Please do not return this

product to the store.

FOR QUESTIONS

OR TECHNICAL

SUPPORT

1-800-976-0877

Weather Resistant

Lantern Speaker

CONNECT 8

SPEAKERS WIRELESSLY

Additional speakers

sold separately

TABLE OF CONTENTS

Warning & FCC Statement

Safety Instructions

New Features

Unpacking

Speaker Component

Getting Started

Charging Battery

3.5 MM Aux Input

Bluetooth Connection

NFC Connection

EZ-Play Wireless Connection

Specifications

Limited Warranty

7-8

WARNING

A lightning flash and arrowhead within an equilateral triangle denotes

the presence of insulated “dangerous voltage” within the product’s

enclosure. The voltage may be of sufficient magnitude to constitute a

risk of electric shock to persons who come into contact with it.

An exclamation point within an equilateral triangle denotes the

presence of important operation & maintenance/service instructions.

FCC WARNING STATEMENT

PREVENT FIRE AND SHOCK HAZARDS. DO NOT USE EXTENSION

CORDS OR OUTLETS THAT EXPOSE PLUG BLADES. DO NOT

EXPOSE CABLES AND PLUGS TO RAIN OR MOISTURE.

DO NOT ATTEMPT TO PERFORM ANY SERVICING THAT IS NOT

INCLUDED IN THE OPERATING INSTRUCTIONS. DO NOT

ATTEMPT TO REPLACE THE BATTERY, AS INCORRECT

INSTALLATION CAN CAUSE FIRE OR EXPLOSION. FOR SERVICE,

CONTACT QUALIFIED SERVICE PERSONNEL.

DO NOT REMOVE COVER OR BACK OF PRODUCT. THERE ARE

NO USER-SERVICEABLE PARTS INSIDE. ATTEMPTING TO

MODIFY CONTROLS OR PERFORMANCE BEYOND

MANUFACTURER SPECIFICATIONS MAY RESULT IN HAZARDOUS

EXPOSURE TO RADIATION.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment. This equipment

has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETYINSTRUCTIONS

1. Read all instructions and save them for personal reference in the future.

2. Follow all directions for operating the product.

3. Heed all warnings on the product and in the operation instructions.

4. Clean with a dry cloth only. Always unplug the product from any power

source before cleaning.

5. Do not use third-party attachments or non-recommended

accessories with this product.

6. Do not place product on an unstable surface, such as a cart,

stand, tripod, table, etc. Unstable surfaces may cause the

product to fall and cause serious injury to people and serious

damage to the product. Follow all manufacturer instructions for

mounting and accessories.

7. Do not block or cover ventilation slots. Openings in the product cabin ensure

reliable operation and prevent overheating. Avoid placing on beds, sofas, and

rugs, or mounting on racks or bookcases, unless proper ventilation is provided.

8. Do not use plug incorrectly. The product may come with a polarized,

alternating-current line plug (one blade is wider/larger than the other). This is a

safety feature: the plug will only go into outlet receptacles one way. Do not force

the plug. If the plug does not fit, contact your electrician to replace the outlet.

9. Prevent power cord hazards. Route cords to avoid walking on them or pinching

them, especially at plug ends and connection points to the product & power outlets.

10. Unplug power cord when not in use. The product should not be plugged into a

power source when not in use for long periods of time.

11. Do not use this product near bodies of water. The product is not waterproof

and cannot be fully submerged in water. Power cords and electric currents should

never be exposed to water.

12. Do not set up near heat sources. Avoid radiators, stoves, heat registers,

amplifiers, and other devices that produce heat. Avoid long exposure to sunlight

and high temperatures.

13. Refer all service to qualified personnel. If the product becomes damaged

during use or encounters a malfunction, contact qualified service personnel. Do

not attempt to service yourself.

14. To use wirelessly, disconnect AC plug completely. The plug must be

completed disconnected from the power outlet.

UNPACKING

This box includes the following items:

• Monster GLO speaker

• AC Power Cable

• Audio Cable

• User Manual (incl. Limited Warranty Statement)

• Quick Start Guide

• Wall Mount

If any items are missing, contact our customer service team at 1.800.976.0677.

1. AUX input

2. AC power input

3. Power ON/OFF

4. Volume DOWN/UP

5. Bluetooth/AUX pairing

6. EZ-Play TRANSMIT/RECEIVE

SPEAKER COMPONENTS

7. Color Setting

8. Light Setting

9. LED Light Panel

10. Mounting Handle

IPX5 Water Resistance

As rated according to International Protection Marking (IP Code), the Monster GLO is

rated IPx5 for water resistance capable of withstanding exposure to water jets. This

makes the Monster GLO safe n light rain, near splashing drinks, and even around the

pool (but not IN the pool!).

LED Light Panels

The speaker has two LED light panels facing opposite directions. Use the panels to

light up spaces after dark, or just to add some color to festivities. Change colors,

brightness, and light duration to suit your personal needs.

NEW FEATURES

GETTING STARTED

• Connect the AC cable to the speaker.

• Plug the AC cable into a wall outlet.

• Press the Power button to turn the speaker ON

(GREEN LED will turn on, and voice confirmation).

• Speaker will enter Bluetooth pairing mode

(BLUE LED will flash).

• If 3.5mm AUX cable is plugged in, speaker will automatically enter AUX mode.

CHARGING BATTERY

NOTE: Before first use, charge for ~10 hours.

• Connect speaker to AC outlet via AC

power input to charge the battery

(RED LED will turn on).

• When fully charged, RED LED will turn off.

• When low on battery life, RED LED will flash.

• Make sure Bluetooth function is enabled on your device.

• Place Bluetooth device and speaker within pairing distance (~3 ft.).

• Press and hold Bluetooth button for 3

seconds to enter pairing mode

(BLUE LED will flash).

• Search for Bluetooth connections on

your device. Select “TOWER OF MUSIC 2”.

• Speaker will confirm connection with

audible sound (BLUE LED turns solid).

BLUETOOTH CONNECTION

NFC CONNECTION

• Turn on Bluetooth on your NFC-compatible device.

• Tap your NFC-compatible device onto the speaker’s NFC logo.

• When paired, BLUE LED will stop flashing and remain steady.

(SELECTED DEVICE MUST BE ANDROID)

3.5MM AUX INPUT

• Plug a 3.5mm cable into the AUX input. Speaker will

automatically turn off Bluetooth function and switch

to AUX.

• Connect any audio device to the 3.5mm audio jack

to play audio through the speaker.

• Control volume on the speaker or use the

connected device’s playback functions.

EZ-PLAY WIRELESS CONNECTION

• Press the EZ-PLAY button TRANSMIT EZ-Play connection

(AMBER LED will flash on TRANSMIT).

• Press and hold the EZ-PLAY button on another EZ-PLAY speaker for 3 seconds to

RECEIVE EZ-PLAY connection (AMBER LED will flash on RECEIVE).

• When speakers connect, the same audio will play from each speaker

(AMBER LED will turn solid).

• When connection is established, speakers will automatically connect whenever

both are powered ON and in range.

• When speaker is converted to RECEIVE, AUX input and Bluetooth features

are disabled.

• Repeat steps with multiple speakers (up to 8 total) to play music in

multiple areas.

Transmitting Speaker

AmberGreen

Receiving Speaker

(ADDITIONAL SPEAKERS SOLD SEPARATELY)

SPECIFICATIONS

Input(s) Bluetooth / AUX / NFC / EZ-Play (TWS)

Control Buttons Power, EZ-Play, Bluetooth, Volume DOWN,

Volume UP, Color Light

LED Indicators Power, Transmit, Receive, Bluetooth, Light

Battery 12.6V 6600mAh, approx. 8 hours of wireless use

Power Input AC

Power Save Auto-sleep after 15 minutes with no signal,

power down after 30 minutes of sleep mode

Speaker Output 5W x 2

Driver Layout 3” Driver (x2), Passive Radiator (x2)

THD + Noise <10%

Cabinet Material Plastic

Dimenstions (W x H x D) 8.11” x 12.6” x 8.11”

Weight 5.4 lbs.

General

Green Power LED

Red Charging LED

Unit power on mode

Unit in Standby mode

Unit in Standby mode / Fully charged

Low in Battery indication

Blue Bluetooth LED

Charging in progress

Unit is connected with BT device

Unit is in BT waiting mode

Amber EZ-Play LED

Unit is in BT pairing mode

EZ-Play Speakers connected

No connection / Lost connection

Off

Slow Flash

Steady On

Slow Flash

Fast Flash

Steady On

Slow Flash

Fast Flash Scan Transmit unit signal / send signal

to receive unit (connection request)

Led Status Indicators

Key

Power On / Off Press to turn the speaker ON / Press and hold to turn

speaker OFF

EZ-Play Press to TRANSMIT / Press and hold to RECEIVE

Bluetooth Press and hold to enter pairing mode

Volume DOWN (-) Press to decrease speaker volume

Volume UP (+) Press to increase speaker volume

Color

Light Press to change brightness of LED lights

Volume UP (+) Press and hold to turn LED lights ON/OFF

Operating Temp

Operating Temperature Range 32F° - 104F°

Operating Humidity Range 40~90% RH

Storage Temperature Range -13F° to 158F°

Connections

3.5mm AUX In x 1

Bluetooth

Bluetooth Version 4.2 + EDR

Bluetooth Profile A2DP, AVRCP

Bluetooth Range 10m (33ft.)

Press to change LED light color

Press and hold to turn LED lights ON/OFF

BTW318

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment.

This equipment should be installed and operated with minimum distance 0cm between the

radiator&your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Andere Handbücher für GLO

Inhaltsverzeichnis

Andere Monster Sprecher Handbücher

Monster

Monster Tower of Music 2 Bedienungsanleitung

Monster

Monster Nomad Bedienungsanleitung

Monster

Monster ClarityHD Micro Bedienungsanleitung

Monster

Monster GLO2 Bedienungsanleitung

Monster

Monster ADVENTURER MAX MT-MS22101 Bedienungsanleitung

Monster

Monster ROCKIN ROLLER PRO Bedienungsanleitung

Monster

Monster Solara Series MNSOL-BLK Bedienungsanleitung

Monster

Monster DECORA MNDECORA-HZL Bedienungsanleitung

Monster

Monster THX SL200-TWR Bedienungsanleitung

Monster

Monster MROVE-BK Bedienungsanleitung

Monster

Monster Rockin' Roller 4 Bedienungsanleitung

Monster

Monster Trio Series Bedienungsanleitung

Monster

Monster Rockin' Roller 4 Bedienungsanleitung

Monster

Monster SUPERSTAR BACKFLOAT Leitfaden

Monster

Monster SOLAR X MNSOLX-BLK Bedienungsanleitung

Monster

Monster PowerNet 200 Bedienungsanleitung

Monster

Monster SuperStar MS11901 Bedienungsanleitung

Monster

Monster Superstar S310 Bedienungsanleitung

Monster

Monster BTW249 Bedienungsanleitung

Monster

Monster ClarityHD one Leitfaden

Monster

Monster Superstar Hotshot Bedienungsanleitung

Monster

Monster SUPERSTAR S130 Bedienungsanleitung

Monster

Monster turbine pro Leitfaden

Monster

Monster ROCKIN ROLLER PRO Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung