Mooer Phaser Player Bedienungsanleitung

Main Features

Over view

Precautions

Phaser Player is a high quality Phaser with 3 different

tones. Built into a convenient mini expression pedal

for easy, on the fly, speed control. It's equipped with

MOOER's unique pressure sensing footswitch circuit

and has 3 different methods of activation.

Power Supply

Connections

Always turn off the power of this and all other equipment

before connecting or disconnecting, this will help prevent

malfunction and / or damage to other devices. Also make

sure to disconnect all connection cables and the power cord

before moving this unit.

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten

the cloth. Do not use abrasive cleanser, cleaning alcohol,

paint thinners, wax, solvents, cleaning fluids, or chemical-

impregnated wiping cloths.

Interference with other electrical devices

Radios and televisions placed nearby may experience reception

interference. Operate this unit at a suitable distance from

radios and televisions.

Location

To avoid deformation, discoloration, or other serious damage,

do not expose this unit to the following conditions:

Direct sunlight

Magnetic fields

Heat sources

Strong vibrations or shocks

Excessive dusty or dirty location

Extreme temperature or humidity

High humidity or moisture

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received, including

interference that may cause undesired operation.

FCC certification

Please Read Carefully Before Proceeding

Please connect the designated AC adapter to an AC outlet

of the correct voltage. Please be sure to use only an AC

adapter which supplies 9V DC(±10%), , center

negative. Unplug the AC power adapter when not in use or

during electrical storms.

Three different Phaser types

Expression pedal controls rate of Phase ﬁlter

Equipped with MOOER's unique pressure

sensing footswitch

TrueBypass switching

Rugged metal housing

Expression Phaser Pedal

Pedal layout Modes and Switching

Part No:620010617

1. LED：

Indicates the on/off status of the effect pedal

2. Input jack :

1/4” audio jack for connecting to the input

device or instrument.

3. Output jack :

1/4” audio jack, effect output for connection

to amp or other devices

4. DC in power jack:

Input for power supply, use a 9V DC regulated

power supply , center pin negative.

5. Pedal extension rings:

Can be extended to increase pedestal surface

area and increase comfort

6. Pressure sensing pads：

Activates the effect by detecting the presence

of your foot. Front sensing pad is used to change

Phaser mode. Rear sensing pad is used to change

switching mode.

7. Expression Pedal:

Controls the rate of the phaser effectin mode 1&2.

Toe down increases the rate and heel down decreases

the rate. Adjusts the ﬁlter frequency in mode 3.

PHASER MODES

The PH WAH has three different Phaser modes, each with a

different sound.

To change Phaser mode:

Press and hold the toe pressure sensing pad

while the pedal is connected to power

Disconnect the power whilst continuing to hold

the sensing pad

Reconnect power

The LED's will ﬂash BLUE to conﬁrm the mode has changed.

Flashing once means mode 1, ﬂashing twice means mode 2,

ﬂashing three times means mode 3. Release the pressure

sensing pad to resume operation.

The LED's will ﬂash RED to conﬁrm the mode has changed.

Flashing once means mode

1, ﬂashing twice means mode

2, ﬂashing three times means mode

3. Release the pressure sensing pad to resume operation.

SWITCHING MODES

PH WAH has 3 different types of switching.

1.Touch the pressure sensing pads with your foot

to turn on the effect. Release your foot from the

pedal to turn off the effect

2.Double tap the pressure sensing pads to turn on

the effect. The effect will remain on untill you

double tap the pressure sensing pads for a second time

3.In this switching mode you can use both

techniques mentioned above for switching the

effect on and off

To change switching mode:

Press and hold the heel pressure sensing pad

while the pedal is connected to power

Disconnect the power whilst continuing to hold

the sensing pad

Reconnect power

*Notes：Any speciﬁcation’s update will not be amended in

this manual.

Input：1/4” mono audio jack.（Impedance: 1M Ohms）

Output：1/4” mono audio jack（Impedance: 100 Ohms）

Power requirements: AC adapter 9V DC , center negative.

Highly recommend to use Mooer Micro Power.

Current Draw：130mA

Dimensions：128mm(D) x 55mm(W) x 48mm(H)

Weight：460g

Accessories：Owner ’s Manual

Specifications

Dieses Handbuch passt für folgende Modelle

Andere Mooer Musikpedal Handbücher

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Free step Bedienungsanleitung

Mooer

Mooer Pitch Step Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer PRIME P1 Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Pitch Step Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Pogo PE50 Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Ocean Machine Bedienungsanleitung

Mooer

Mooer SkyVerb Bedienungsanleitung

Mooer

Mooer TresCab Einrichtungshandbuch

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer GE300 Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer ShimVerb Micro Series Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer Micro Series Bedienungsanleitung

Mooer

Mooer MOD FACTORY PRO Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Behringer

Behringer ULTRA WAH UW300 Bedienungsanleitung

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Behringer

Behringer PB600 Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Bedienungsanleitung

BYOC

BYOC Analog Chorus Handbuch

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung