Morgan Cycle Caboose Bedienungsanleitung
001 Orient the Rear Axle Plate so that the rear sprocket sets into large oval slot. Be sure to avoid
twisting the chain.
002 - Orient the Rear Axle Plate so that the rear sprocket sets into large oval slot. Be sure to avoid
twisting the chain.
003 - Mount chain onto front pedal sprocket
004
005 - Mount chain onto rear sprocket
006
007 - Adjust the Rear Axle Plate forward/rear to fine-tune Chain tension (neither tight nor too slack).
Proper tension is just enough slack for chain to wobble up/down 1/4 inch.
008 - Line up the 4 holes (Axle Plate to Frame Plate) Also thread the Supporting Bolts to lock-in the
Chain's tension. The Supporting Bolts also ensure Axle Plate remains properly aligned to trailer frame.
009 - Step 1: Thread Bolt to set proper depth.
Step 2: Thread Nut to lock the bolt in place.
010 - Insert 1st bolt to attach Axle Plate to Frame Plate.
Make sure black Axle Plate is parallel lined to Frame Plate
011 - Insert remaining 3 bolts, hand tighten the 4 bolts, then use wrenches to securely tighten 4 bolts.
012 - Axle Set secured to Frame with Chain properly tensioned.
Mount Free Wheel to axle for Free Wheel
013 - Identify axle for Free Wheel
014 - Identify the Free Wheel
Mount Drive Wheel to axle for Drive Wheel
015 - Identify axle for Drive Wheel (key locks into Drive Wheel slot)
016 - Identify the Drive Wheel
017 - Use wrench to secure Nut to Axle
018
Andere Handbücher für Caboose
1
Andere Morgan Cycle Fahrrad Handbücher
