Morphy Richards Redefine Bedienungsanleitung

Instruction

manual

Please read and keep these

instructions for future use

KT131000 MUK REV7

KT131004 MUK REV1.indd 3 18/02/2015 10:34

this is where the similarity ends

this is where the exceptional begins

... the premium, highly innovative Morphy Richards product group.

Driven by principles of innovation and providing exceptional quality, the

Redeﬁne range is designed to fulﬁl the consumer need for brilliantly performing

products that have equal aesthetic consideration.

KT131004 MUK REV1.indd 1 18/02/2015 10:34

Location

• Always locate your appliance away from the edge of the

worktop.

• Ensure that the appliance is used on a ﬁrm, ﬂat surface.

• Do not use the appliance outdoors or near water.

• WARNING: Do not place the appliance onto a metal tray or

metal surface whilst in use.

Mains cable

• Do not let the mains cable hang over the edge of the

worktop where a child could reach it.

• Do not let the mains cable run across an open space e.g.

between a low socket and a table.

• Do not let the mains cable run across a cooker or other hot

area which might damage the cable.

• The mains cable should reach from the socket to the base

unit without straining the connections.

Personal safety

• WARNING: To protect against ﬁre, electric shock and

personal injury do not immerse cord, plug and appliance in

water or any other liquid.

• Unplug from the outlet before cleaning.

• Allow to cool before putting on or taking off parts and

before cleaning.

Health & Safety

The use of any electrical appliance requires the following common sense safety rules.

Please read these instructions carefully before using the product.

• This appliance can be used by children aged from 8 years and above if

they have been given supervision or instruction concerning the use of the

appliance in a safe way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user maintenance shall

not be made by children unless they are older than 8 and supervised.

• Appliances can be used by persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the appliance in a

safe way and understand the hazards involved.

• Children shall not play with the appliance.

• If the mains cable is damaged, it must be replaced by the manufacturer,

it’s service agent or similarly qualiﬁed person in order to avoid a hazard.

• This appliance is intended to be used in household and similar

applications such as: farm houses, by clients in hotels, motels and other

residential type environments, bed and breakfast type environments. It

is not suitable for use in staff kitchen areas in shops, ofﬁces and other

working environments.

Other safety considerations

• The use of attachments or tools not recommended or sold

by Morphy Richards, may cause ﬁre, electric shock or injury.

• Do not use the appliance for any use other than to boil

water.

• Do not place the appliance on or near a hot gas or electric

burner or in a heated oven.

• The Water Tank must not be in the Main Unit when being

ﬁlled with water.

• Unplug from the outlet when not in use.

• WARNING: The appliance must not be immersed for

cleaning.

• CAUTION: To prevent damage to the appliance, do not use

alkaline cleaning agents when cleaning. Use a soft cloth

and detergent.

Electrical requirements

• Check that the voltage on the rating plate of your appliance

corresponds with your house electricity supply which must

be A.C. (Alternating Current).

• Should the fuse in the mains plug require changing, a 13

amp BS1362 fuse must be ﬁtted.

• WARNING: This appliance must be earthed.

KT131004 MUK REV1.indd 4 18/02/2015 10:34

13 14

22 89

1 Start / Stop Button

Starts and pauses the heating process. Can also be

used to pause dispense while in progress and put the

Hot Water Dispenser into standby mode.

2 Water Volume Dial

Controls the volume of water to be heated and

dispensed. Volume is displayed on the LCD screen (15).

3 LCD Screen

Displays volumes, temperatures, functions, and

warnings.

4 Temperature Button

Adjusts the temperature of dispensed water, turns

sounds on and off.

5 Dispense Button

Switches the Auto Dispense feature on and off.

6 Dispense Nozzles

7 Water tank

Contains the BRITA MAXTRA Cartridge 19, BRITA Memo

20 and BRITA Hopper 21.

8 Drip Tray

9 Drip Tray Cover

10 Drip Tray Indicator

‘Full’ icon indicates when the Drip Tray needs to be

emptied.

11 Heat Icon

Displays when the heat cycle is in process.

12 Water Tank Icon

Displays when the tank needs to be reﬁlled.

13 Dispense Icon

Displays when water is ready for dispense.

14 Auto Dispense Icon

Displays when the auto dispense feature is enabled.

15 Dispense Volume Display

Displays the volume of water to be heated and

dispensed.

16 Descale Icon

Displays when the Hot Water Dispenser requires

descaling.

17 Temperature Icon

Displays the temperature the water will be heated to

prior to dispense.

18 Standby Light

19 BRITA MAXTRA Cartridge

20 BRITA MEMO

Monitors the life of the MAXTRA Cartridge.

21 BRITA Hopper

22 Water Level Sensor

23 Main Unit

KT131004 MUK REV1.indd 6 18/02/2015 10:34

3Place a vessel underneath the Dispense Nozzles

(6) and press the Dispense Button (5) to reset the

system. This takes approx. 35 seconds. Any water

dispensed during resetting should be discarded.

5Press the Start/Stop Button (1), the Hot Water

Dispenser will pump 240ml of water into the

heating chamber and start to heat.

Using the Water Volume Dial (2), adjust the

Dispense Volume (15) to 240ml. Place a cup on the

Drip Tray (8) under the Dispense Nozzles (6).

6When heated the water will automatically

dispense from the Dispense Nozzels (6) into your

cup.

1Remove the Water Tank (7) from the Main Unit

(23). Remove the BRITA MAXTRA Cartridge (19) and

BRITA Hopper (21) from the Water Tank. 2

Fill the Water Tank with cold water and return to

your Hot Water Dispenser. Plug your Hot Water

Dispenser into the electrical socket.

Quick

Start

Guide

This quick start guide shows you the basic steps

for dispensing 240ml of hot water for a single

cup of tea or coffee. This quick start guide does

not detail the steps to use the BRITA Filtration

System.

For more detailed information on using your

new Hot Water Dispenser or BRITA Filtration

System, please read this instruction manual.

KT131004 MUK REV1.indd 7 18/02/2015 10:34

Resetting

The System

Before using your Hot Water Dispenser for the

ﬁrst time, or after it has been unplugged from

the mains. You must perform the following steps

to reset your Hot Water Dispensers’ heating

chamber.

Your Hot Water Dispenser will not function

if the system has not been reset.

Place an empty vessel, such as a measuring jug

or saucepan underneath the Dispense Nozzles (6). 4Press the Dispense Button to reset the system.

Any remaining water will be dispensed from the

system into the vessel below. This takes

approximately 35 seconds. It is now ready for use.

The Dispense Button (5) will ﬂash and the

‘Dispense Icon’ (13) will appear on the screen.

Plug your Hot Water Dispenser into the mains

outlet and switch on at the socket.

seconds

KT131004 MUK REV1.indd 8 18/02/2015 10:34

BRITA ﬁltration

Filtering your water improves the taste and

appearance of beverages by reducing limescale, lead,

chlorine and other impurities.

The BRITA MAXTRA Filter Cartridge offers improved

ﬁltration due to MAXTRA Technology. The natural

MicroporeFilter in combination with the powerful

Protect Filter reduces chlorine and limescale for a great

natural taste and further reduces metals such as lead

and copper. Unique ﬂow control ensures the perfect

ﬁltration time for best results.

For maximum ﬁlter performance and for optimum

taste, it is important to change your BRITA MAXTRA

Filter Cartridge regularly. BRITA recommends that you

replace the cartridge every 4 weeks.

Using the BRITA ﬁltration system is optional. If you do

not wish to use the ﬁltration system, simply remove

the BRITA Hopper (21) and MAXTRA Filter Cartridge (19)

from the Water Tank (7).

Filtering water through the BRITA Filtration System takes

roughly 4 minutes to ﬁlter 1.5L of water. You can use

the system while ﬁltering, providing enough water has

ﬁltered into the Water Tank.

Installing a BRITA MAXTRA Cartridge

Unwrap the BRITA MAXTRA Cartridge (19) and immerse

in water, gently shake to loosen any bubbles.

Push the BRITA MAXTRA Cartridge into place in the

BRITA Hopper.

Place the BRITA Hopper into the Water Tank.

Before returning the Water Tank to the Main Unit, ﬁll

the BRITA Hopper with Cold Water and allow the

water to ﬁlter through the BRITA MAXTRA Cartridge.

Discard the ﬁltered water. Repeat this step twice.

Fill the BRITA Hopper with fresh water and return the

Water Tank to the main unit. Your BRITA Cartridge is

ready for use with your Hot Water Dispenser.

BRITA Memo

The BRITA Memo (20) measures the recommended

time of use of your MAXTRA Filter Cartridge (19). The

BRITA Memo is located in the top of the BRITA Hopper

(21).

To reset the BRITA Memo, please press and hold down

the Start Button on the Memo until all four bars appear

in the display and ﬂash twice. The Cartridge Active

Indicator Light in the bottom right corner of the BRITA

Memo indicates that it is working. After four weeks,

all four bars will disappear and a ﬂashing arrow will

indicate that the cartridge should now be changed.

After changing the cartridge, reset the Memo.

Replacing the

BRITA Memo

The BRITA Memo (20) has a life of approximately 5

years. To remove the exhausted BRITA Memo, place a

screwdriver in the notch next to the BRITA Memo and

push it out. Please note that BRITA Memo should not be

removed for any other reason than to dispose of it.

More information on the use of BRITA ﬁlter cartridges

and the BRITA Memo can be found in the BRITA

information guide supplied with your hot water

dispenser.

Telephone our replacement parts helpline (0344 871

0945) for your new BRITA Memo. If you require

assistance on using your BRITA MAXTRA ﬁlter cartridge

or BRITA Memo, please call BRITA Customer Care team

on 0844 742 4800.

KT131004 MUK REV1.indd 9 18/02/2015 10:34

3Place the required vessel (cup, pan, pot etc.) under

the Dispense Nozzles (6). One or two vessels can

be ﬁlled at the same time during each dispense

cycle, provided they are the same size.

Adjust the temperature of the water by pressing

the Temperature Button (4) to cycle through the

options (85,95 & 100oC). The water temperature

will be displayed on the screen (17).

1If required, follow steps of 1-6 of ‘Resetting the

system’ (see page 4) to reset the system and then

discard the water. If the Hot Water Dispenser is in

standby mode, press any button to wake.

Pull out the Drip Tray (8) from the Main Unit (23)

(if needed).

Using the Hot

Water Dispenser

Before using your Hot Water Dispenser, or if

it has not been used for over a week, follow

these instructions to boil the maximum amount

of water, then discard to ensure the system is

ﬂushed through.

The following instructions detail the steps to

follow to use your Hot Water Dispenser. For

Installation of the BRITA Filtration system see the

previous page.

Filtering water through the BRITA Maxtra

Cartridge takes around 4 minutes for 1.5L.

Ensure enough water has been ﬁltered and is

ready for use in the water tank before heating.

KT131004 MUK REV1.indd 10 18/02/2015 10:34

5Turn the Water Volume Dial (2) to adjust the

Dispense Volume (15). Your Hot Water Dispenser

can heat between 150ml to 1.5L of water per cycle. 6You can automatically dispense volumes of water

at 600ml and below. To turn this feature on or off,

press the Dispense Button (5). This function cannot

be selected for volumes over 600ml. These must

be dispensed manually.

9To pause the water ﬂow whilst dispensing, press

either the Start/Stop or the Dispense Button. 10

To resume the water ﬂow, press the Dispense

Button again. It is recommended to dispense

any remaining water to enable your Hot Water

Dispenser to enter standby mode.

NOTE: You must dispense all water heated

before you can start the heating cycle again.

7Press the Start / Stop Button (1) to begin heating.

Your Hot Water Dispenser will sound and the heat

cycle will begin. Once started, the volume and

temperature can only be changed during the ﬁrst

few seconds of the heating cycle.

8Once ready your Hot Water Dispenser will sound.

The hot water will be dispensed automatically. If

the manual dispense function has been selected,

press the Dispense Button (5) to begin dispensing.

KT131004 MUK REV1.indd 11 18/02/2015 10:34

Drinks Temperature

Getting the correct water temperature is essential if you

are to enjoy your favourite hot drinks with maximum

ﬂavour and taste. E.g. If you’re a green tea drinker then

water that is brewed too hot will scorch the leaves

creating a bitter taste.

Press the Temperature Button (4) to cycle through the

options (85,95 & 100oC). The water temperature will be

displayed on the screen (17).

The guide (below) includes some of the most popular

drinks, to help you get the most from your Hot Water

Dispenser.

Your Hot Water Dispenser has been pre-programed

with 3 of the most popular temperatures for drinks; 85,

95 and 100 degrees.

By choosing the correct temperature for your drink, not

only will you create better tasting drinks, you will also

save time and energy too.

85oC

Green, white and herbal teas, powder based cold and

ﬂu remedies, black instant coffee.

95oC

French press/cafetiere coffee, instant coffee with milk,

hot toddies, malted milk, hot chocolate.

100oC

Black teas e.g. darjeeling, assam, ceylon, english

breakfast and earl grey, noodle / pasta snacks, instant

soup type drinks.

Auto / Manual

Dispense

The auto dispense feature allows you to automatically

dispense volumes of water below 600ml. For safety

reasons it is not possible to automatically dispense

volumes above 600ml.

Before heating, press the Dispense Button (5) to switch

the auto dispense feature on or off. The Icon (14) will

appear on the LCD Screen (3) when the feature is

enabled. After heating, if the volume is above 600ml,

or if the auto dispense is turned off, your Hot Water

Dispenser will sound and the Dispense Button will

Illuminate. Press the Dispense Button to begin

dispensing water from the Dispense Nozzles (6).

NOTE: All water must be dispensed before you can

start the heating cycle again.

KT131004 MUK REV1.indd 12 18/02/2015 10:34

Andere Handbücher für Redefine

Inhaltsverzeichnis

Andere Morphy Richards Kaffeemaschine Handbücher

Morphy Richards

Morphy Richards Cascata Bedienungsanleitung

Morphy Richards

Morphy Richards meno Espresso Bedienungsanleitung

Morphy Richards

Morphy Richards Accents 47087 Bedienungsanleitung

Morphy Richards

Morphy Richards IB47009 Bedienungsanleitung

Morphy Richards

Morphy Richards CoffeMaker Bedienungsanleitung

Morphy Richards

Morphy Richards 12 CUP FILTER COFFEE MAKER - REV 2 Bedienungsanleitung

Morphy Richards

Morphy Richards PUMP ESPRESSO COFFEE MAKER 47507 Bedienungsanleitung

Morphy Richards

Morphy Richards 47070 Bedienungsanleitung

Morphy Richards

Morphy Richards MRCM35BK Bedienungsanleitung

Morphy Richards

Morphy Richards 47507 Bedienungsanleitung

Morphy Richards

Morphy Richards 47060 Bedienungsanleitung

Morphy Richards

Morphy Richards IB47070 Bedienungsanleitung

Morphy Richards

Morphy Richards 10-12 CUP FILTER COFFEE MAKER Bedienungsanleitung

Morphy Richards

Morphy Richards 47586 Bedienungsanleitung

Morphy Richards

Morphy Richards Accents Espresso MR47580 Bedienungsanleitung

Morphy Richards

Morphy Richards MISTER CAPPUCINO EXPRESSO AND FILTER COFFEE... Bedienungsanleitung

Morphy Richards

Morphy Richards 172251 Bedienungsanleitung

Morphy Richards

Morphy Richards ELIPTA Bedienungsanleitung

Morphy Richards

Morphy Richards IB47002 Bedienungsanleitung

Morphy Richards

Morphy Richards Accents U:Pod Bedienungsanleitung

Morphy Richards

Morphy Richards 12 CUP FILTER COFFEE MAKER - REV 2 Bedienungsanleitung

Morphy Richards

Morphy Richards 47020 MATTINO ESPRESSO MACHINE Bedienungsanleitung

Morphy Richards

Morphy Richards ARC 47110 Bedienungsanleitung

Morphy Richards

Morphy Richards 10 CUP FILTER COFFEE MAKER - REV 2 Bedienungsanleitung

Beliebte Kaffeemaschine Handbücher anderer Marken

Taurus

Taurus Livorno 6 Bedienungsanleitung

Delta-q

Delta-q QUICK Bedienungsanleitung

Bunn

Bunn LCA-1 Fehlerbehebungshandbuch

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Montageanleitung

Saeco

Saeco Vienna Plus Sup 018M Bedienungsanleitung

DeLonghi

DeLonghi DC300 Bedienungsanleitung

INCAPTO

INCAPTO BXCO1470E Bedienungsanleitung

Bosch

Bosch TASSIMO finesse TAS16B Series Bedienungsanleitung

Exido

Exido 245-072 Bedienungsanleitung

Animo

Animo OptiVend Choco Bedienungsanleitung

Siemens

Siemens TQ505DF Series Bedienungsanleitung

DeLonghi

DeLonghi ECI341 Bedienungsanleitung

Krups

Krups KT406511 Bedienungsanleitung

Cimbali

Cimbali M32 Classic Bedienungsanleitung

Philips

Philips HL3844N Bedienungsanleitung

Bosch

Bosch TES 515 SERIES Bedienungsanleitung

Tekmatix

Tekmatix TMFM - 65 Bedienungsanleitung

Scarlett

Scarlett SC-CM33005 Bedienungsanleitung