Morphy Richards TURBOSTEAM 40659 Bedienungsanleitung

Turbo steam iron steam/spray/shot

Please read and keep these instructions

Getting

the

best

from

your

new

iron....

Safety first

Caution must be used when handling this appliance as it

does get very hot. Always switch off the unit and allow to

cool before cleaning or storing.

Jet cleaning

Your iron will give the best ironing results and will last longer

if you apply jet cleaning after each period of ironing.

RN40655 MUK Rev 3

For replacement parts, help with using your Morphy Richards product,

problems and lots more, contact us by phone or through our website.

UK Helpline: 0870 060 2615

Replacement parts: 0870 167 6646

Ireland 1800 409119

IMPORTANT

SAFETY

INSTRUCTIONS

The use of any electrical

appliance requires the

following common sense

safety rules.

Primarily there is danger of

injury or death and

secondly the danger of

damage to the appliance.

These are indicated in the

text by the following two

conventions:

WARNING: Danger to

the person!

IMPORTANT: Damage to

the appliance! In addition

we offer the following

safety advice.

Location

• Do not use outdoors.

• The iron must be used and

rested on a stable surface.

Children

• Close supervision is

necessary when any

appliance is used near

children.

Personal safety

•WARNING: Burns can

occur from touching

hot metal parts, hot

water or steam. Use

caution when you turn

a steam iron upside

down, there may be

hot water in the water

tank.

•WARNING: To protect

against the risk of

electric shock do not

put the appliance in

water or in any other

liquid.

• Do not use the vertical

steam feature on clothes

that are being worn.

• Do not leave the iron

unattended whilst plugged

in or on an ironing board.

Never allow the mains lead

to over hang the work

surface.

• The socket should always

be off before plugging or

unplugging from the

socket. Never yank the

cord to disconnect from

the socket, instead, grasp

plug and pull to

disconnect.

• Do not allow the cord to

touch hot surfaces. Let the

iron cool completely before

putting away. Loop cord

loosely around the iron

before storing.

Other safety

considerations

• Use the iron only for its

intended use.

• Always disconnect the iron

from the electrical socket

when filling with water or

emptying, and when not in

use.

• When placing the iron on

its heel, ensure that the

surface on which the heel

is placed is stable.

• Do not operate the iron

with a damaged cord or if

the iron has been dropped

or damaged. To avoid the

risk of electric shock, do

not disassemble the iron,

but telephone Morphy

Richards for advice.

Incorrect reassembly can

cause a risk of electric

shock when the iron is

used.

Special

instructions

• If your iron does not work,

check the following points:

Has the temperature

control been set to the

required temperature? Is

the plug in its socket? Is

the plug itself or the socket

faulty? (Check by plugging

in another appliance).

•WARNING: When not in

use, your iron should

never be placed flat

and left on an ironing

board.

• To prevent damage to the

textile being ironed, follow

the temperature guide

carefully. (Test the inside of

the hem of the garment).

• When ironing is complete,

remove the plug from the

socket, empty any

remaining water from the

tank, and allow to cool

before storage.

• If you drop or severely

knock your iron this could

cause internal damage

even if the outside appears

alright. Have it checked by

a qualified electrician.

• It is recommended that you

use up one beaker of water

by operating your iron’s

steam and shot of steam

functions before ironing any

clothes as some dripping

may occur while your irons

steam system is activated.

UUKKHHeellpplliinnee0088770000660022661155RReeppllaacceemmeennttPPaarrttss0088770011667766664466IIrreellaannddHHeellpplliinnee11880000440099111199

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of

the International Textile Care Labelling Code.

ELECTRICAL

REQUIREMENTS

Check that the voltage on the

rating plate of your appliance

corresponds with your house

electricity supply which must be

A.C. (Alternating Current).

If the socket outlets in your

home are not suitable for the

plug supplied with this appliance

the plug should be removed and

the appropriate one fitted.

WARNING : The plug

removed from the mains

lead, if severed, must be

destroyed as a plug with a

bared flexible cord is

hazardous if engaged into

a live socket outlet.

Should the fuse in the 13 amp

plug require changing, a 13 amp

BS1362 fuse must be fitted.

WARNING: This appliance

must be earthed.

Symbol

(120°C Max) Cool (160°C Max) Warm (210°C Max) Hot

Control knob

positions

Do not iron

at all

Fabric Nylon, Acetates

e.g. Acrilan

Courtelle, Orlon

Triacetates, e.g.

Tricel/Polyester

Wool, Polyester

mixtures e.g.

Polyester/Cotton

Cotton, Linen

Rayon, Rayon

mixtures,

e.g. Rayon/Linen

Ironing Iron on wrong side

if moisture required

use damp cloth

(Not Acetate)

Fabrics requiring this

setting usually require

steam pressing for heavy

cotton, denim etc.

With water in tank Dry and spray Steam/spray/shot of steam

Without water in tank Dry ironing

INSTRUCTIONS FOR USE

Temperature guide

Jet clean

44UUKKHHeellpplliinnee0088770000660022661155RReeppllaacceemmeennttPPaarrttss0088770011667766664466IIrreellaannddHHeellpplliinnee11880000440099111199

COMPONENTS OF

YOUR IRON

⁄⁄Shot of steam button

¤¤Spray button

‹‹Variable steam control

››Filling hole with cap

ﬁﬁSpray nozzle

ﬂﬂSoleplate

‡‡Illuminated temperature control

dial

··Water tank

‚‚Life long anti-scale (certain

models only)

„„Power on indicator lights - Auto

shut-off indicator (certain

models only)

‰‰Filling beaker

BEFORE USE

Note: The steam facility should

only be used on garments which

are suitable for ironing at the 2

and 3 dot settings.

When ironing with the steam

facility at the 2 dot setting, the

steam output should be set at

the lower end of the steam

range (see variable steam

section).

Textiles and clothes are

supposed to carry ironing

instructions. If they don’t you

should follow the fabric guide on

page 3, but be sure to test the

temperature by ironing the hem

of the garment or similar area

first.

If you turn the control dial down

from a hot setting to a cooler

setting, wait until the iron

temperature has stabilised

before you continue ironing.

ﬂ‡

‚

400

350

300

⁄

‹

›

ﬁ

„

‰

FILLING AA

1Make sure that the iron is not

plugged in and then set the

variable steam control ‹‹to the

‘0’ position before filling the iron

with water.

2Open the fill cap and pour water

through the filling hole ››into

the water tank ··, using the

beaker provided, one beaker full

of water fills the tank (400ml). AA

After filling replace the fill cap. In

hard water areas the use of

distilled or demineralised water

is recommended.

Never use battery topping up

fluid or water containing any

substances like starch, or sugar,

or defrosted water from a

refrigerator.

3Always pour out the remaining

water after use. Warning: When

filling your iron with tap water

always use the beaker provided.

Never fill directly under the tap.

Temperature

control BB

Plug in the iron and switch on.

The ‘power on’ indicator lights

„„situated in the back cover

will illuminate. Set the

temperature control dial BBto

the temperature required, but

don’t start ironing immediately. If

you wait a few minutes, the iron

will stabilise at the required

setting.Your Morphy Richards

iron is fitted with an indicator

light ‡‡which will go on and off

while you are ironing.

This is perfectly normal as it

shows that the iron is

maintaining the heat setting you

have chosen.

It is always a good idea to begin

with cool fabrics and work up to

higher settings.

An iron heats up quicker than it

cools down so you’ll save time

and electricity.

FEATURES OF YOUR

IRON

Temperature

indicator light

The indicator light under the

control knob shows that the iron

is warming up. When the

required temperature is reached

the light will go out and will

cycle on-off during operation.

Dry ironing

You can use your iron as a dry

iron only. Make sure the variable

steam control ‹‹is set to the ‘0’

symbol.

Any temperature setting may be

used depending on the

garment. The spray feature may

be used provided there is water

in the tank (see filling section).

You do not need to put any

water in the tank when dry

ironing only.

Spray CC

Press the spray button ¤¤and

aim the spray of water at

stubborn creases. You can do

this whilst dry ironing providing

there is water in the tank. When

using the water spray it may be

necessary to push the button a

few times to get the spray pump

primed.

Variable steam DD

Fill the iron with water as

described in ‘Filling’, page 4 and

insert the plug into the electrical

socket.

The steam output can be varied

from low to high by sliding the

variable steam control DD. When

using the iron at the bottom of

the steam range, the steam

output should be adjusted to

the lowest setting.

The steam facility should only

be used on garments which are

suitable for ironing at 2 and 3

dot setting.

Min

Max

SilkNylon

Wool

Cotton Linen

lower

steam

2 dot

higher

steam

3 dot

66UUKKHHeellpplliinnee0088770000660022661155RReeppllaacceemmeennttPPaarrttss0088770011667766664466IIrreellaannddHHeellpplliinnee11880000440099111199

Shot of steam EE

Press the shot of steam button

⁄⁄to obtain a burst of extra

steam for ironing out creases in

heavy material such as denim

etc.

The shot of steam can be used

whilst dry ironing, providing

there is water in the tank, and

the temperature control is set

within the steam range.

Do not use shot of steam at

temperatures below the steam

range shown on the control.

Note: For optimum steam

quality, do not operate the shot

more than three times in

succession.

Vertical steam

Hold the iron in a vertical

position between 1cm and 2cm

away from the item FF. Press

the shot of steam button ⁄⁄,

this will create vertical steam.

This feature is especially useful

for removing creases from

hanging clothes, curtains, wall

hangings, etc.

Note; For optimum steam

quality, do not operate the shot

more than three times in

succession.

No drip system

(certain models only)

Your iron is fitted with a no drip

system which is designed to

prevent water escaping from the

soleplate when the iron is too

cold.

During use, the no drip system

may emit a loud click,

particularly during heat-up or

whilst cooling down. This is

perfectly normal and indicates

that the system is functioning

correctly.

Auto shut-off

(certain models only)

If your iron is fitted with the auto

shut-off function it will

automatically shut down after a

set period.

If the iron is left unattended in

the horizontal position it will

shut down after 30 seconds.

If it is left in the vertical position

it will shut down after 8 minutes.

When this happens the two

‘power on’ lights, situated in the

back cover „„will flash to show

that the iron is in power-off

mode.

To reactivate the iron gently

shake it until the ‘power on’

lights „„stop flashing and

remain on.

The iron will then start to heat

back up to the temperature it is

set to.

Life long anti-scale

system (certain models only)

The life long anti-scale system

reduces scale deposits and

helps prolong the life of the iron.

MAINTENANCE

Emptying and storing

When you have finished ironing,

unplug your iron. Ensure that

the variable steam control is set

at the ‘0’ position, lift up the fill

cap and empty any remaining

water out of the filling hole. GG

Do not store in the box, but in

an upright position HH, so that

any drops of water remaining

cannot leak out and discolour

the soleplate .

Important: The flex can be

damaged if wound too tightly

around the iron after use. Make

a loose loop with the flex and

wrap it around the iron. The iron

must be cool before winding the

flex and storing on its heel.

Jet cleaning

Your iron has a built in cleaning

system designed to keep the

water valve, steam chamber

and steam vents clear of lint

and loose mineral deposits. The

‘jet clean’ should be operated

after each period of ironing.

To operate, ensure that there is

little water in the tank, place the

iron on its heel and turn the

temperature control dial to the

maximum setting. Wait for the

beep, then unplug the iron and

hold it about 6’’ (150mm) above

the sink in the ironing position.

Press the shot of steam button

about 10 times in succession.

After this cleaning operation,

empty out any remaining water.

WARNING: Do not attempt

to descale the soleplate

with descaling products.

To clean a stainless

steel soleplate

(certain models only)

To keep the soleplate of your

iron clean and free of limescale,

we recommend that you use one

of the gentle chrome, silver or

stainless steel cleaners that are

generally available. Always follow

the manufacturers instructions.

To clean off melted man-made

fibres set the iron at 3 dot

position and pass it over a clean

piece of cotton which will draw

the deposit off the surface.

To clean a coated

soleplate

(certain models only)

In the unlikely event of any man-

made fibre fusing to the

soleplate, set the iron at the 3

dot position and pass it over a

clean piece of cotton which will

draw the deposit off the surface.

Do not use scouring powder or

solution as this could cause

damage to the coating.

To clean an

aluminium soleplate

(certain models only)

To keep the soleplate clean and

free of limescale, make a paste

of mild scouring powder and a

little water. Apply a small amount

to the soleplate, rub and then

remove with a damp cloth. Wipe

thoroughly with a clean cloth.

To clean the exterior

Allow the iron to cool and wipe

over with a damp cloth and mild

detergent, then wipe with a dry

cloth.

Helpline

If you have any difficulty with

your appliance, do not hesitate

to call us.

We are more likely to be able to

help than the store from where

you bought it.

Please have the following

information ready to enable our

staff to deal with your query

quickly.

• Name of the product.

• Model number as shown on the

underside of the appliance.

• Serial number as shown on

underside of the appliance.

UK Helpline 0870 060 2615

Replacement Parts 0870 167 6646

Ireland Helpline 1800 409119

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and

design. The company, therefore reserves the right to change the specification of its

models at any time.

The After Sales Division

Morphy Richards Ltd

Mexborough, South Yorkshire,

England, S64 8AJ

Helpline (office hours)

UK 0870 060 2615

Republic of Ireland 1800 409119

RN40655 Rev3 01/07

For details of other products in the Morphy Richards range please see our website . . .

YOUR TWO YEAR

GUARANTEE

It is important to retain the

retailers receipt as proof of

purchase. Staple your

receipt to this back cover

for future reference.

Please quote the following

information if the product

develops a fault. These

numbers can be found on

the base of the product.

Model no.

Serial no.

All Morphy Richards

products are individually

tested before leaving the

factory. In the unlikely event

of any appliance proving to

be faulty within 28 days of

purchase it should be

returned to the place of

purchase for it to be

replaced.

If the fault develops after 28

days and within 24 months

of original purchase, you

should contact the Helpline

number quoting Model

number and Serial number

on the product, or write to

Morphy Richards at the

address shown. You may be

asked to return a copy of

proof of purchase.

Subject to the exclusions

set out below (see

Exclusions) the faulty

appliance will then be

repaired or replaced and

dispatched usually within 7

working days of receipt.

If for any reason this item is

replaced during the 2 year

guarantee period, the

guarantee on the new item

will be calculated from

original purchase date.

Therefore it is vital to retain

your original till receipt or

invoice to indicate the date

of initial purchase.

To qualify for the 2 year

guarantee the appliance

must have been used

according to the

manufacturers instructions.

For example kettles should

have been regularly

descaled.

EXCLUSIONS

Morphy Richards shall not

be liable to replace or

repair the goods under the

terms of the guarantee

where:

1The fault has been caused

or is attributable to

accidental use, misuse,

negligent use or used

contrary to the

manufacturers

recommendations or where

the fault has been caused

by power surges or

damage caused in transit.

2The appliance has been

used on a voltage supply

other than that stamped on

the products.

3Repairs have been

attempted by persons other

than our service staff (or

authorised dealer).

4Where the appliance has

been used for hire

purposes or non domestic

use.

5Morphy Richards are not

liable to carry out any type

of servicing work, under the

guarantee.

6Plastic filters for all Morphy

Richards kettles and coffee

makers are not covered by

the guarantee.

This guarantee does not

confer any rights other than

those expressly set out

above and does not cover

any claims for

consequential loss or

damage. This guarantee is

offered as an additional

benefit and does not affect

your statutory rights as a

consumer.

• This guarantee is valid in

the UK and Ireland only.

For electrical products sold within the

European Community. At the end of the

electrical products useful life it should

not be disposed of with household

waste.

Please recycle where facilities exist.

Check with your Local Authority or

retailer for recycling advice in your

country.

Andere Handbücher für TURBOSTEAM 40659

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Morphy Richards Eisen Handbücher

Morphy Richards

Morphy Richards SEMI-ELECTRONIC 40715 Bedienungsanleitung

Morphy Richards

Morphy Richards INTELLIDOME Bedienungsanleitung

Morphy Richards

Morphy Richards IB42410 Bedienungsanleitung

Morphy Richards

Morphy Richards RN40635 Bedienungsanleitung

Morphy Richards

Morphy Richards RN40655 Bedienungsanleitung

Morphy Richards

Morphy Richards JET STREAM Bedienungsanleitung

Morphy Richards

Morphy Richards 40725 Bedienungsanleitung

Morphy Richards

Morphy Richards ORBIT TRAVEL 41540 Bedienungsanleitung

Morphy Richards

Morphy Richards RN40655 Bedienungsanleitung

Morphy Richards

Morphy Richards Precise Steam Plus Bedienungsanleitung

Morphy Richards

Morphy Richards 40684 Bedienungsanleitung

Morphy Richards

Morphy Richards Saturn Steam Bedienungsanleitung

Morphy Richards

Morphy Richards Power Steam Bedienungsanleitung

Morphy Richards

Morphy Richards RN40310MUK - REV 3 Bedienungsanleitung

Morphy Richards

Morphy Richards RN40868 Bedienungsanleitung

Morphy Richards

Morphy Richards breeze Bedienungsanleitung

Morphy Richards

Morphy Richards Steam Generator ironing system Bedienungsanleitung

Morphy Richards

Morphy Richards Power SteamPro Bedienungsanleitung

Morphy Richards

Morphy Richards Comfigrip Advanced 40715 Bedienungsanleitung

Morphy Richards

Morphy Richards SEMI-ELECTRONIC IRON RN40692 Bedienungsanleitung

Morphy Richards

Morphy Richards TURBOSTEAM IRON - MANUAL 2 Bedienungsanleitung

Morphy Richards

Morphy Richards JET STREAM ELITE+ - AUTRE Bedienungsanleitung

Morphy Richards

Morphy Richards IB4070X Bedienungsanleitung

Morphy Richards

Morphy Richards ECOLECTRIC 40652 Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Philips

Philips GC6012 Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Philips

Philips HI5914/30 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Scarlett

Scarlett SC-1334S Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung