Morse 195A-A Bedienungsanleitung

CONTENTS

Page

Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2

Machine Description. . . . . . . . . . . . . . . . . . . 3

Assembly Instructions. . . . . . . . . . . . . . .. . . . . 4

Operating Instructions. . . . . . . . . . . . . . .. . . . . 4

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 4

Parts Lists and Diagrams. . . . . . . . . . . . . . . . . . 5 - 7

Operator’s Manual

for Morse Kontrol-Karriers

with Air Power Tilt

Model 195A-A

with Serial Number 298276 to 321083

Receiving Procedures

Every Morse drum handler is inspected prior to shipping. However,

damage may be incurred during transit.

• Check for visible damage. If you choose to accept damaged

freight, always sign noting the damage on the Bill of

Lading.

• Document the damage and have the truck driver sign. We

recommend keeping a digital camera at your receiving dock

for this purpose.

• Open packages expeditiously to check the condition of the

goods. There is only a 24 hour window to notify the carrier

of any concealed damage.

• Immediately report all damage to the shipping company!

Then you may contact Morse for assistance with your

freight claim.

• Morse Manufacturing will not be held responsible for any

damaged freight that is not signed for as damaged.

Limited 2 Year Warranty

Morse drum handling equipment is guaranteed against defects in

workmanship or materials for two years when used properly within

its rated capacity. Warranty does not cover wear from normal use

or damage from accident or abuse. Motors and other purchased

parts carry the warranties of their manufacturers.

For warranty claims, contact your Morse Dealer to obtain a

return authorization number, and for return freight advice. Return

freight must be prepaid.

In all instances, liability is limited to the purchase price paid or to

repairing or replacing the product. Customer assumes liability for

any modications, unauthorized repairs or parts substitution.

Safety Information

While Morse Manufacturing Co. drum handling equipment is

engineered for safety and e󰀩ciency, a high degree of responsibility

must be placed upon the machine operator to follow safe practices,

based primarily on common sense, upon which true safety

depends.

Failure to follow the safety precautions in this manual can result in

personal injury or property damage. Observe the same precautions

as with similar machinery where carelessness in operating or

maintenance is hazardous to personnel. Carefully read the safety

precautions below and throughout this manual.

Review the Material Safety Data Sheet(s) for the material(s) in

the drum(s) and take all necessary precautions. Safety shoes,

work gloves, hard hat and other personal protective devices are

recommended.

Prior to initial use, inspect all moving parts and test rotation of

saddle assembly. Inspect saddle assembly for proper operation.

Perform necessary load test, inspections, operator training, etc.

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

[email protected] 103 Kuhn Rd.

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

Operator’s Manual for Morse Models 195A-A

Serial Number 298276 to 321083

morsedrum.com

Safety Information (continued)

DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.

This signal word is limited to the most extreme situations.

WARNING - Indicates a situation which, if not avoided, could result in serious injury or

death.

CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.

WARNING - Kontrol-Karriers are designed to handle one drum of the types listed at the top of page

3. Machine Description. DO NOT attempt to handle any other type of drum or object.

WARNING - DO NOT exceed the weight capacity.

WARNING - DO NOT operate damaged or malfunctioning unit, or a unit with missing parts.

WARNING - DO NOT lift people or suspend loads over people. Stay clear of suspended loads.

WARNING - DO NOT lift loads higher than necessary.

WARNING - DO NOT leave suspended loads unattended.

WARNING - DO NOT remove or obscure warning labels.

WARNING - DO NOT operate without rst having read and understood operating manual.

WARNING - DO NOT make alterations or modify the unit. Under no circumstances should any

modications be made to the Morse machinery without factory authorization. Any modications may

void the warranty. This machine was designed to perform a specic job and alterations may result in

injury to operator or machine.

WARNING - Wear safety shoes with non-slip soles and hard toe protection.

CAUTION: DO NOT allow drum to impact on oor, ground, etc.

WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and

2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to

the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

Operator’s Manual for Morse Model 195A-A

Serial Number 298276 to 321083

morsedrum.com

Machine Description

The Power Tilt Kontrol-Karrier is designed to lift, transport, and dispense a

ribbed 55-gallon (210 liter) steel drum 22.5” (57.2 cm) in diameter.

Maximum full-drum capacity is 1500 Lb. (680 kg). Capacity is derated to

800 Lb. (363 kg) for a half-full drum. Half-full rating is based on the tilt

mechanism’s capacity for handling an unbalanced, bottom-heavy drum.

Important

1. Please read all instructions thoroughly before attempting to operate your new Morse drum handler.

2. When loading, unloading, operating, or maintaining your MORSE drum handler, always use care and good judgment. Maintain

secure footing and a rm hold. Keep hands and loose clothing away from all moving parts. Never allow anyone to be below any part

of a raised drum handler or drum. Read operating instructions and review the pictures in the sales brochure before operation.

3. The 195 Series are a “Group 1 structural and mechanical” below-the-hook lifting device which are covered by the American National

Standard ASME B30.20. The user should comply with all aspects of this standard.

55/30 Series Diameter Adapters for

drum with diameter smaller than 22”

(56 cm). To handle a smaller drum,

insert the correct size Diameter Adapter

into the standard drum holder. See

Diameter Adapter info at:

https://morsedrum.com/products/

diameter-adapters

ONLY Diameter Adapters for drum with

17.5” (44.5 cm) diameter or smaller

have integrated brackets to prevent

drum slipping length-ways.

NOTE: For 30-gallon (114 Liter)

PLASTIC drum, insert Diameter

Adapter; AND install Bracket or Top

Rim Clamp to prevent drum slipping.

IMPORTANT: To prevent 30 to 55 gallon (114 to 210 L) size plastic drum from

slipping, you MUST install either Top Rim Clamp Kit or Bracket Assembly Kit.

1. Bracket Assembly Kit # 4556-P is required to handle a RIMLESS

plastic drum (gure 2.1), and is also recommended for a ber drum.

The Bracket adjusts for a 31” to 39” (79 to 99 cm) tall drum.

You can also handle a rimmed drum with the Bracket installed.

2. Top Rim Clamp Kit # 4560B-P to handle a RIMMED plastic drum

(gure 2.2). Install the Top Rim Clamp Kit to handle a RIMMED

plastic, steel or ber drum with suitable top rim.

ACCESSORIES

Figure 2.2

Kit # 4560B-P

Install Top Rim Clamp Kit

to handle RIMMED plastic

drum

Figure 2.1

Kit # 4556-P

Install Bracket Assembly Kit

to handle RIMLESS or

RIMMED plastic drum

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

Operator’s Manual for Morse Models 195A-A

Serial Number 298276 to 321083

morsedrum.com

Assembly Instructions

1. Remove the metal screw-plug on top of the speed reducer.

2. Look into the hole to verify oil is in the speed reducer.

3. Install the plastic vent-plug in place of the metal screw-plug to allow internal

pressure to equalize with atmospheric pressure.

4. Air motor requires 20 PSI at 22 SCFM. Operating the air motor at higher

pressures will reduce the life of the air motor and power transmission

components.

5. Prior to initial use, inspect all moving parts and test rotation of saddle

assembly. Inspect ratchet web straps for proper operation. Perform

necessary load test, inspections, operator training, etc. as prescribed in the

ANSI/ASME B30.20 standard.

Operating Instructions

1. With Kontrol-Karrier standing on the oor, lower hoist and engage hoist hook

into the lifting eye.

2. Raise hoist to lift Kontrol-Karrier clear of oor and move it to the drum.

3. Position Kontrol-Karrier at a height which aligns the saddle band with the

center of the drum. Swing open ratchet hinge plate and strap hinge plates.

4. With the ratchet straps hanging freely, push Kontrol-Karrier against the drum

to surround the drum with the saddle band.

5. Drape the straps across the front of the drum and thread each strap through

slot in ratchet. Operate ratchet to tighten straps against the drum.

6. Raise hoist and position the drum at the pouring station.

7. Pour the drum by pressing the “pour forward” button on the pendant (item 4).

8. After pouring is completed, rotate the drum back to vertical position and

lower hoist to return drum to oor.

9. To remove drum: Operate the ratchet to loosen each web strap around the

drum. Release straps from ratchets and swing open hinge plates.

Maintenance

1. Inspect oil level in gear box / speed reducer and ll with high quality,

synthetic lubricant for gears if necessary. Use Klubersynth UH1 6-460

(#096060) or equivalent.

2. Periodically inspect all moving parts, framework, ratchet, straps and contact

areas for signs of wear, fatigue, or loosening. The web strap should be

removed from service & replaced if any of the following are visible:

• Acid or caustic burns

• Melting or charring of any part of the strap

• Holes, tears, cuts, snags or embedded articles

• Broken or worn stitching in load bearing splices

• Excessive abrasive wear

3. Perform all inspections, load tests, and maintenance according to the ANSI/

ASME B30.20 standard.

4. Ensure all labels are in place. Product labels should be inspected

periodically and cleaned as necessary to maintain good legibility. Please

contact Morse Mfg. Co. for replacement labels.

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

Operator’s Manual for Morse Model 195A-A

Serial Number 298276 to 321083

morsedrum.com

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

Operator’s Manual for Morse Models 195A-A

Serial Number 298276 to 321083

morsedrum.com

The Specialist In Drum Handling Equipment

Model # 195A-A

Kontrol-Karrier with Air Power Tilt

Operator’s Manual for Morse Model 195A-A

Serial Number 298276 to 321083

morsedrum.com

Inhaltsverzeichnis

Andere morse Hebesystem Handbücher

morse

morse 400A-60-125 Bedienungsanleitung

morse

morse Kontrol-Karrier 185A Bedienungsanleitung

morse

morse MORStak 289F Bedienungsanleitung

morse

morse 400A-96SS-125 Bedienungsanleitung

morse

morse 400AM-60 Bedienungsanleitung

morse

morse 195AM-A Bedienungsanleitung

morse

morse 400Z-60 Bedienungsanleitung

morse

morse 510M Bedienungsanleitung

morse

morse 510-120 Bedienungsanleitung

morse

morse 510SS-114 Bedienungsanleitung

morse

morse PILOT 900 Bedienungsanleitung

morse

morse 400AM-96-114 Bedienungsanleitung

morse

morse 520-120 Bedienungsanleitung

morse

morse 82H-120 Bedienungsanleitung

morse

morse 80APS Bedienungsanleitung

morse

morse 92 Series Bedienungsanleitung

morse

morse 400A-72-127 Bedienungsanleitung

morse

morse 82H-SS-125 Bedienungsanleitung

morse

morse 400A-96SS-127 Bedienungsanleitung

morse

morse 185AM Bedienungsanleitung

morse

morse 515-N-125 Bedienungsanleitung

morse

morse 510-125 Bedienungsanleitung

morse

morse 520 Bedienungsanleitung

morse

morse 400A-60-110 Bedienungsanleitung

Beliebte Hebesystem Handbücher anderer Marken

Braun

Braun NL955 Series Bedienungsanleitung

haacon

haacon 1889.10 Bedienungsanleitung

Protekt

Protekt AT 252 Bedienungsanleitung

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Bedienungsanleitung

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Bedienungsanleitung

Genie

Genie Z-60/34 Bedienungsanleitung

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Bedienungsanleitung

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Bedienungsanleitung

Custom Equipment

Custom Equipment Hy-Brid 3 Series Programmierhandbuch

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Programmierhandbuch

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Programmierhandbuch

BERG

BERG BeNomic EasyLeaf Bedienungsanleitung

Powermate

Powermate LiftGate LG-3 Bedienungsanleitung

Snorkel

Snorkel TM12 Series Bedienungsanleitung

Terberg

Terberg OMNIDEKA Bedienungsanleitung

Harmar Mobility

Harmar Mobility AL625 Betriebsanleitung

Rotary

Rotary SPO16 Bedienungsanleitung

Ricon

Ricon Mirage F9T Bedienungsanleitung

morse 195A-A Bedienungsanleitung

Beliebte Hebesystem Handbücher anderer Marken