Motorline professional MC112N Gebrauchs- und Pflegehandbuch

V1.7

REV. 02/2020

MC112N | MC113N | MC114N

USER’S AND INSTALLER’S MANUAL

A B

18B

14A

15A

18A

14B

15B

16A

ENEN

. PRODUCT

.CONTENT

INDEX

DESCRIPTION OF PRODUCT

TECHNICAL CHARACTERISTICS

DIMENSIONS

COMPONENTS MAP

MR13- RECEIVER

FREQUENCY VARIATORS CONNECTIONS

FREQUENCY VARIATORS

ADJUSTMENT OF LIMIT SWITCHES

INSTRUCTIONS FOR CONSUMERS AND SPECIALIZED TECHNICIANS

FREQUENCY VARIATOR CONNECTIONS

DIGITAL NUMERIC KEYBOARD

OTHER CONNECTIONS (MAGNETIC SPACER, BRAKING RESITOR AND ENTRY PANEL)

LOCK/UNLOCK KEYBOARD

MX13 - TRANSMITTER

CONNECTIONS CONNECTORS

LED DISPLAY MESSAGES

MR13 RECEIVER CONNECTIONS

MENU NAVIGATION

CLOSING PRE- FLASHING LIGHT

RELAY FOR TWO-DOOR INTERLOCK

PROGRAMMING MENU ACCESS (MENU 04)

EXTERNAL COMPONENTS CONNECTIONS

PROGRAMMING MENU - 04

. SAFETY INSTRUCTIONS

. COMPONENTS

. VARIATORS AND CONECTORS

. PROGRAMMING

. TROUBLESHOOTING

. CONNECTIONS SQUEME

. DESCRIPTIONS

01. SAFETY INSTRUCTIONS

This product is certified in accordance with European

Community (EC) safety standards.

This product complies with Directive 2011/65/EU of the

European Parliament and of the Council, of 8 June 2011, on

the restriction of the use of certain hazardous substances in

electrical and electronic equipment.

(Applicable in countries with recycling systems).

This marking on the product or literature indicates that the

product and electronic accessories (eg. Charger, USB cable,

electronic material, controls, etc.) should not be disposed

of as other household waste at the end of its useful life. To

avoid possible harm to the environment or human health

resulting from the uncontrolled disposal of waste, separate

these items from other types of waste and recycle them

responsibly to promote the sustainable reuse of material

resources. Home users should contact the dealer where they

purchased this product or the National Environment Agency

for details on where and how they can take these items

for environmentally safe recycling. Business users should

contact their vendor and check the terms and conditions

of the purchase agreement. This product and its electronic

accessories should not be mixed with other commercial

waste.

This marking indicates that the product and electronic

accessories (eg. charger, USB cable, electronic material,

controls, etc.) are susceptible to electric shock by direct or

indirect contact with electricity. Be cautious when handling

theproductandobserveallsafetyproceduresinthismanual.

ATTENTION:

EN

01. SAFETY INSTRUCTIONS

GENERAL WARNINGS

•This manual contains very important safety and usage information.

very important. Read all instructions carefully before beginning the

installation/usage procedures and keep this manual in a safe place

that it can be consulted whenever necessary.

•This product is intended for use only as described in this manual. Any

other enforcement or operation that is not mentioned is expressly

prohibited, as it may damage the product and put people at risk

causing serious injuries.

•Thismanual isintendedfirstly forspecializedtechnicians, anddoes not

invalidate the user’s responsibility to read the “User Norms” section in

order to ensure the correct functioning of the product.

•The installation and repair of this product may be done by qualified

and specialized technicians, to assure every procedure are carried

out in accordance with applicable rules and norms. Nonprofessional

and inexperienced users are expressly prohibited of taking any action,

unless explicitly requested by specialized technicians to do so.

•Installations must be frequently inspected for unbalance and the

wear signals of the cables, springs, hinges, wheels, supports and other

mechanical assembly parts.

•Do not use the product if it is necessary repair or adjustment is

required.

•When performing maintenance, cleaning and replacement of parts,

the product must be disconnected from power supply. Also including

any operation that requires opening the product cover.

•The use, cleaning and maintenance of this product may be carried

out by any persons aged eight years old and over and persons whose

physical,sensorialormentalcapacitiesarelower,orbypersonswithout

any knowledge of the product, provided that these are supervision

and instructions given by persons with experienced in terms of usage

of the product in a safe manner and who understands the risks and

dangers involved.

•Children shouldn’t play with the product or opening devices to avoid

the motorized door or gate from being triggered involuntarily.

WARNINGS FOR TECHNICIANS

•Before beginning the installation procedures, make sure that you have

all the devices and materials necessary to complete the installation

of the product.

•You should note your Protection Index (IP) and operating temperature

to ensure that is suitable for the installation site.

•Provide the manual of the product to the user and let them know how

to handle it in an emergency.

•If the automatism is installed on a gate with a pedestrian door, a door

locking mechanism must be installed while the gate is in motion.

•Do not install the product “upside down” or supported by elements do

not support its weight. If necessary, add brackets at strategic points

to ensure the safety of the automatism.

•Do not install the product in explosive site.

•Safety devices must protect the possible crushing, cutting, transport

and danger areas of the motorized door or gate.

•Verify that the elements to be automated (gates, door, windows,

blinds, etc.) are in perfect function, aligned and level. Also verify if the

necessary mechanical stops are in the appropriate places.

•The centralmust be installed on asafe placeof anyfluid(rain, moisture,

etc.), dust and pests.

•You must route the various electrical cables through protective tubes,

to protect them against mechanical exertions, essentially on the

power supply cable. Please note that all the cables must enter the

central from the bottom.

•If the automatism is to be installed at a height of more than 2,5m from

the ground or other level of access, the minimum safety and health

requirements for the use of work equipment workers at the work of

Directive 2009/104/CE of European Parliament and of the Council of 16

September 2009.

•Attach the permanent label for the manual release as close as possible

EN

01. SAFETY INSTRUCTIONS

to the release mechanism.

•Disconnect means, such as a switch or circuit breaker on the electrical

panel, must be provided on the product’s fixed power supply leads in

accordance with the installation rules.

•If the product to be installed requires power supply of 230Vac or

110Vac, ensure that connection is to an electrical panel with ground

connection.

•The product is only powered by low voltage satefy with central (only

at 24V motors)

WARNINGS FOR USERS

•Keep this manual in a safe place to be consulted whenever necessary.

•If the product has contact with fluids without being prepared, it must

immediately disconnect from the power supply to avoid short circuits,

and consult a specialized technician.

•Ensure that technician has provided you the product manual and

informed you how to handle the product in an emergency.

•Ifthesystemrequiresanyrepairormodification,unlocktheautomatism,

turn off the power and do not use it until all safety conditions have

been met.

•In the event of tripping of circuits breakers of fuse failure, locate

the malfunction and solve it before resetting the circuit breaker or

replacing the fuse. If the malfunction is not repairable by consult this

manual, contact a technician.

•Keep the operation area of the motorized gate free while the gate in in

motion, and do not create strength to the gate movement.

•Do not perform any operation on mechanical elements or hinges if the

product is in motion.

RESPONSABILITY

•Supplier disclaims any liability if:

•Product failure or deformation result from improper installation

use or maintenance!

•Safety norms are not followed in the installation, use and

maintenance of the product.

•Instructions in this manual are not followed.

•Damaged is caused by unauthorized modifications

•In these cases, the warranty is voided.

SYMBOLS LEGEND:

• Important safety

notices

• Useful information

• Programming

information

• Potentiometer

information

• Connectors

information

• Buttons

information

A B

10 11

1 2

ANT

STRSEC12 13NL R G B + -

M1 M2 M3 OP CH PUS GND FAP FCH GND DS BL COM 24V BR2 R G B 12V

BR1

1 2 3 4 5 6 7 8

PRES2

PRES1

ASB

SENS2|

SENS1|

FREQ

POWER

CH1

CH2

RESET

4 3

104

252185

300

ENEN

. PRODUCT

DESCRIPTION OF PRODUCT COMPONENTS MAP

DIMENSIONS

TECHNICAL CHARACTERISTICS

•Control board capable of working with motors up to 750W, 1500W and 2200W. It has a frequency variator

that allows a soft start and stop, thus giving a greater reliability and durability of the product. The central

also allows the adjustment of the opening / closing speed as well as the adjustment of the opening/

closing decceleration speed.

•This central allows easy and intuitive operation of various parameters and menus through a display.

•It also has other functions such as Present Man, possibility to view the count of cycles perform by the

door so far (complete opening and closing corresponds to one cycle).

•This central is also capable of receiving command signals ROLLING CODE (receiver MR13) and allows

connection for obstacle detection kits (MX13 transmitter).

The control board is composed of the following components:

1 · Frequency variator

2 · Connections connectors

3 · MR13 Receptor

4 · Braking Resistance

5 · Magnetic Spacer (Optional)

6 · Quick connection sheet

7 · STOP key

8 · Opening key

9 · Close key

10 · Mirror Photocell

11 · MX13 Transmitter (see page 5B)

MC112N MC114N MC113N

• Voltage 750W max 1500W max 2200W max

• Power Supply 230Vac 50/60Hz

• Protection Grade IP64

• Environment temperature -25°C ~ 55°C

• Relative Humidity <90%

• Accessory output 24Vdc 3W / 12Vdc 2W

• Maximum frequency output 90Hz

IMPORTANT

Before starting programming, it is necessary to re-

move the card from the receiver’s batteries, otherwi-

se the door will not perform any type of maneuver.

A B

ENEN

Wireless receiver, which allows the reception of Motorline ROLLING CODE remote controllers and MX

transmitters signals, for safety circuits (eg safety bands, magnetic contacts).

This receiver allows the use of a single MX transmitter.

Wireless transmitter, which allows the connection of obstacle detection kits

(safety rubber, magnetic contact, etc.), for communication with MR.

This device performs automatic operation tests with MR, at deﬁned time

intervals, providing a longer battery life.

. COMPONENTS

MX - TRANSMITTER

DIPPER

•Dippers 1 and 2define the time interval

for receiving test signals MX13. This

communication is made to ensure that both

handsets are working perfectly. Function

off Level 3 Level 2 Level 1

•Dipper 3 defines the type of operation of the

SAFETY input, between 8K2 system and NO contact.

NO contactResistive

contact 8k2

•The more frequentcommunication

with the MR13 receiver, the shorter

the battery life.

• For MX13 and MR13 devices to be

synchronized, you must configure

dippers 1 and 2 in the same way

on both devices.

PROG

Each time the PROG button is pressed, the transmitted code is changed.

Therefore, if you press the PROG button, you have to program it again on the

MR13 (see page 5A).

Not include in

ECO and ECO

PLUS doors.

PROG AND LED 1 BUTTON

•The PROG button has the function of generating a new code, and transmitting it to

the receiver. Each time the button is pressed, LED1 illuminates, indicating that the

signal is being transmitted.

LED 1

• INIB - This input has the function

to disable the operation of the

SAFETY input, through a NO contact

for connection of push button or

magnetic contact.

CONNECTOR

• SAFETY - NO or 8K2 input, defined

in dipper 3. Whenever this input is

triggered an order will be sent to the

MR13 to open the SEC contact.

Example of use:

When the MX13 device is installed

on a sectioned door with safety

rubber, it is necessary to disable the

SAFETY signal before the gate closes

fully, so that the rubber does not

send reverse order due to obstacle

detection.

. COMPONENTS

MR- RECEIVER

DIPPER

•Dippers 1 and 2 deﬁne the time interval

for receiving test signals MX13. This

communication is made to ensure that both

handsets are working perfectly. Function

off Level 3 Level 2 Level 1

• For the MX13 and MR13 devices to be synchronized, you must configure dippers 1 and 2in the

same way on both devices.

LED4

LEARN SW1

LEARN BUTTON

•This button is used when programming Rolling

Code Motorline remote controllers or MX13

transmitter.

Programming Remote Control:

1 • Press the LEARN button once and the LED4

will blink once.

2 • Then press the button you want to program.

Programming MX13

transmitter:

1 • Press rapidly the LEARN

button 2 times and the

LED4 flashes 2 times.

2 • Press the PROG button

on the MX13 only once.

• To reset the memory, press the

button for 10 seconds and all

memorized remote controls and

MX13 will be erased.

• While pressing the LEARN button,

the LED4 is on.

After 10 seconds, the LED4 will flash

and switch off confirming

the operation.

LEDs

•LED 1: (ON) Indicates that it is being powered at

230V ac.

•LED 2: (ON) Contact "SEC" closed | Contact "SEC"

opened

(every time an MX13 signal is sent the contact

opens).

•LED 3: (ON) Contact "STR" closed | Contact "STR"

opened

•LED 4: Programming Led

LED2 LED3LED1 LED4

CONNECTORS

• L/N: 230Vac power input.

SIG: Pulse input

R/G/B: RGB led connection

• +/-: Power supply of external accessories (max

150mA).

• SEC: NC safety signal output.

• STR: NO Opening signal output

• ANT: Antenna hot pole input

• ↓: Antenna mass input



R/L1 S/L2 T/L3 U/T1 V/T2 W/T3

B2+2/B1DC+/+1DC-

MI1

MI2

MI3

MI4

MI5

MI6

MI7

24V

DCM

DFM

10V

ACM

AVI

ACI

AFM

M01

M02

24V

DCM

SG+

SG-

SGND

MCM

R/L1 S/L2 T/L3 U/T1 V/T2 W/T3

B2+2/B1DC+/+1DC-

MI1

MI2

MI3

MI4

MI5

MI6

MI7

24V

DCM

DFM

10V

ACM

AVI

ACI

AFM

M01

M02

24V

DCM

SG+

SG-

SGND

MCM

R/L1 S/L2 T/L3 U/T1 V/T2 W/T3

B2+2/B1DC+/+1DC-

MI1

MI2

MI3

MI4

MI5

MI6

MI7

24V

DCM

DFM

10V

ACM

AVI

ACI

AFM

M01

M02

24V

DCM

SG+

SG-

SGND

MCM

72mm

142mm

157mm

87mm

157mm

87mm

FREQUENCY VARIATORS

MCN Up to W) MCN Up to W) MCN Up to W)

The frequency inverters have different dimensions depending on their power.

The MC114N inverter is used as a reference for the connections scheme in this manual, however

their connections are the same.

. VARIATORS AND CONECTORS

A B

R/L1 S/L2 T/L3 U/T1 V/T2 W/T3

B2+2/B1DC+/+1DC-

MI1

MI2

MI3

MI4

MI5

MI6

MI7

24V

DCM

DFM

10V

ACM

AVI

ACI

AFM

M01

M02

24V

DCM

SG+

SG-

SGND

MCM

R G B 12V

BR1

M1 M2 M3 OP C/P COM FA P FCH COM DS BL GND 24V BR2 E1E1

LOOP

4 3 6 5

LOOP

ENEN

R/L1 • 230Vac Power Supply

S/L2 • 230Vac Power Supply

U/T1 • Motor output – Phase 1

V/T2 • Motor output – Phase 2

W/T3 • Motor output – Phase 3

T/L3 • Not used

•Ground

DC- • Not used

DC+/+1 • Not used

+2/B1 • Braking resistance connection

B2 • Braking resistance connection

• Ground

FREQUENCY VARIATORS CONNECTIONS CONNECTIONS CONNECTORS

The below panel ate all inputs and outputs of connection connectors.The following panel are all inputs and

outputs of frequency variator.

24V • Common STOP

S1 • STOP key

S2 • STOP key

DCM • Not used

SG+ • Not used

SG- • Not used

SGND • Not used

MCM • Voltage input for M01 and M02 outputs

10V • Not used

ACM • Not used

AVI • Not used

ACI • Not used

AFM • Not used

M01 • Pulse output for MR13

M02 • Optional misfeed relay output or pre- ﬂashing light.

Programmable at parameter 04.61

MI1 • Opening key

MI2 • Closing key

MI3 • Limit switch

MI4 • Limit switch

MI5 • Photocells

MI6 • STOP button

MI7 • Not used

24V • Photocells and Radars Input (24Vdc 3W)

DCM • Negative output 24Vdc 3W

DFM • Not used

RA • NO relay output for electric brake

RB • Not used

RC • Common relay for electric brake

. VARIATORS AND CONECTORS . VARIATORS AND CONECTORS

E1 • Ground

M1 • Motor output – Phase 1

M2 • Motor output – Phase 2

M3 • Motor output – Phase 3

OP • Opening key

C/P • Lock/Pedestrian Button

COM • Common

FAP • Opening limit switch

FCH • Closing limit switch

COM • Common

DS • Photocells input

BL • STOP

GND • 24V Negative

24V • Photocells and Radars Input (24Vdc 3W)

BR1 • Output with eletric brake fuse (1A 250V fuse)

BR2 • Electric brake

E1 • Ground

N• 230Vac Power Supply

L• 230Vac Power Supply DPN 16A circuit brake

R• RED LED output

G• GREEN LED output

B• BLUE LED output

12V • 12Vdc 2W LED Power Supply

LOOP1 • LOOP1 for Magnetic Spacer

LOOP2 • LOOP2 for Magnetic Spacer



R/L1 S/L2 T/L3 U/T1 V/T2 W/T3

B2+2/B1

DC+/+1

DC-

MI1

MI2

MI3

MI4

MI5

MI6

MI7

24V

DCM

DFM

10V

ACM

AVI

ACI

AFM

M01

M02

24V

DCM

SG+

SG-

SGND

MCM

1 2

ANT

STRSEC12 13NL R G B + -

108 9 3 4 5 2 1

1 2 3 4 5 6 7 8 9 10 11 12

13 14 15 16 17 18 19 20 21 22 23 24

M1 M2 M3 OP C/P COM FAP FCH COM DS BL GND 24V BR2 R G B 12V

BR1

COM

LOOP

4 3 6 5

LOOP

U/T1 V/T2 56

44 12

W/T3

. CONNECTIONS SQUEME

FREQUENCY VARIATOR CONNECTIONS

FREQUENCY

VARIATOR

Brown

Blue

The numbers “ ” indicate

the connection to be made

on the card.

POWER SUPPLY



R/L1 S/L2 T/L3 U/T1 V/T2 W/T3

B2+2/B1

DC+/+1

DC-

MI1

MI2

MI3

MI4

MI5

MI6

MI7

24V

DCM

DFM

10V

ACM

AVI

ACI

AFM

M01

M02

24V

DCM

SG+

SG-

SGND

MCM

1 2 3 4 5 6 7 8 9 10 11 12

13 14 15 16 17 18 19 20 21 22 23 24

1 2

ANT

STRSEC12 13NL R G B + -

19 14 13 12

21 11

M1 M2 M3 OP C/P COM FAP FCH COM DS BL GND 24V BR2 R G B 12V

BR1

COM

LOOP

4 3 6 5

LOOP

SEC STR

. CONNECTIONS SQUEME

MR RECEIVER CONNECTIONS

MR13

FREQUENCY

VARIATOR

The numbers “ ” indicate

the connection to be made

on the card.

POWER SUPPLY

Blue

Brown

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Motorline professional Steuereinheit Handbücher

Motorline professional

Motorline professional MC60 Gebrauchs- und Pflegehandbuch

Motorline professional

Motorline professional MC4 EVO Bedienungsanleitung

Motorline professional

Motorline professional MC7 Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC61PL Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC75 Gebrauchs- und Pflegehandbuch

Motorline professional

Motorline professional MC70 Bedienungsanleitung

Motorline professional

Motorline professional MC112PR Bedienungsanleitung

Motorline professional

Motorline professional MC41SP Bedienungsanleitung

Motorline professional

Motorline professional MC61SE Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC61PL Bedienungsanleitung

Motorline professional

Motorline professional MCONNECT SHUTTER Gebrauchs- und Pflegehandbuch

Motorline professional

Motorline professional MC70 EVO Bedienungsanleitung

Motorline professional

Motorline professional MC61BR Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC102 Bedienungsanleitung

Motorline professional

Motorline professional MCS01 Bedienungsanleitung

Motorline professional

Motorline professional MC15BA Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung