Motorline professional MC60 Gebrauchs- und Pflegehandbuch

v3.0

REV. 06/2021

MC60MC60 EN

USER’S AND INSTALLER’S MANUAL

2A 2B

A

B



B







A



A

B

A

B

A

B

A

A

B

B

A

A

B

A

A

B

B

B

A

A

B



A





ENEN

INDEX INDEX

. CONTENT . CONTENT

. SAFETY INSTRUCTIONS

. CONTROL BOARD

. CONEXION SCHEME

. INSTALLATION

. PROGRAMMING "P"

. PROGRAMMING "E"

. DISPLAY

. CONEXION SCHEME

CHARACTERISTICS

SLIDING GATES [SC]

BUTTONS AND LEDs

BARRIERS [BR]

AUTOMATIC PILLARS [PL]

MASTER-SLAVE

CONNECTORS

SECTIONAL DOORS [SE]

BASE INSTALLATION PROCESS

TRANSMITTERS

FUNCTIONS

EXCLUSIVE FACTORY VALUES

"P" MENUS

"E" MENUS

P0COURSE PROGRAMMING

P1DECELERATION TIME ADJUSTMENT

E2COURTESY LIGHT TIME

P7OPERATING LOGIC

P4PAUSE TIME

P2SETTING DOWN TIME

E3FOLLOW ME

E4COURSE TIME ADJUSTMENT

P8FLASHING LIGHT

P5PHOTOCELLS 1 PROGRAMMING

E7MANUEVERS COUNTER

E0PRESENT MAN

P3PEDESTRIAN COURSE TIME

E5BRAKE/LOCK/PUSH

P9REMOTE PROGRAMMING

P6PHOTOCELLS 2 PROGRAMMING

E8RESET  RESET FACTORY VALUES

E9RGB OUTPUT

E1SOFT START

DISPLAY INDICATIONS

CONEXIONS MAP

E6DECELERATION SPEED

3EN

GENERAL WARNINGS

•This manual contains very important safety and usage

information. very important. Read all instructions carefully

before beginning the installation/usage procedures and keep

this manual in a safe place that it can be consulted whenever

necessary.

•This product is intended for use only as described in this manual.

Any other enforcement or operation that is not mentioned is

expressly prohibited, as it may damage the product and put

people at risk causing serious injuries.

•This manual is intended firstly for specialized technicians, and

does not invalidate the user’s responsibility to read the “User

Norms” section in order to ensure the correct functioning of the

product.

•The installation and repair of this product may be done by

qualified and specialized technicians, to assure every procedure

are carried out in accordance with applicable rules and norms.

Nonprofessional and inexperienced users are expressly

prohibited of taking any action, unless explicitly requested by

specialized technicians to do so.

•Installations must be frequently inspected for unbalance and

the wear signals of the cables, springs, hinges, wheels, supports

and other mechanical assembly parts.

•Do not use the product if it is necessary repair or adjustment is

required.

•When performing maintenance, cleaning and replacement of

parts, the product must be disconnected from power supply.

Also including any operation that requires opening the product

cover.

•Theuse,cleaningandmaintenanceofthisproductmaybecarried

out by any persons aged eight years old and over and persons

whose physical, sensorial or mental capacities are lower, or by

. SAFETY INSTRUCTIONS

ATTENTION:

This product is certified in accordance with European

Community (EC) safety standards.

This product complies with Directive 2011/65/EU of the

European Parliament and of the Council, of 8 June 2011, on

the restriction of the use of certain hazardous substances

in electrical and electronic equipment and with Delegated

Directive (EU) 2015/863 from Commission.

(Applicable in countries with recycling systems).

This marking on the product or literature indicates that

the product and electronic accessories (eg. Charger, USB

cable, electronic material, controls, etc.) should not be

disposed of as other household waste at the end of its

useful life. To avoid possible harm to the environment or

human health resulting from the uncontrolled disposal

of waste, separate these items from other types of waste

and recycle them responsibly to promote the sustainable

reuse of material resources. Home users should contact

the dealer where they purchased this product or the

National Environment Agency for details on where and

how they can take these items for environmentally safe

recycling. Business users should contact their vendor

and check the terms and conditions of the purchase

agreement. This product and its electronic accessories

should not be mixed with other commercial waste.

This marking indicates that the product and electronic

accessories (eg. charger, USB cable, electronic material,

controls, etc.) are susceptible to electric shock by direct or

indirect contact with electricity. Be cautious when handling

the product and observe all safety procedures in this

manual.

4EN

persons without any knowledge of the product, provided that

these are supervision and instructions given by persons with

experienced in terms of usage of the product in a safe manner

and who understands the risks and dangers involved.

•Children shouldn’t play with the product or opening devices

to avoid the motorized door or gate from being triggered

involuntarily.

WARNINGS FOR TECHNICIANS

•Before beginning the installation procedures, make sure that

you have all the devices and materials necessary to complete

the installation of the product.

•You should note your Protection Index (IP) and operating

temperature to ensure that is suitable for the installation site.

•Provide the manual of the product to the user and let them know

how to handle it in an emergency.

•If the automatism is installed on a gate with a pedestrian door,

a door locking mechanism must be installed while the gate is in

motion.

•Do not install the product “upside down” or supported by

elements do not support its weight. If necessary, add brackets

at strategic points to ensure the safety of the automatism.

•Do not install the product in explosive site.

•Safety devices must protect the possible crushing, cutting,

transport and danger areas of the motorized door or gate.

•Verify that the elements to be automated (gates, door, windows,

blinds, etc.) are in perfect function, aligned and level. Also verify

if the necessary mechanical stops are in the appropriate places.

•The central must be installed on a safe place of any fluid (rain,

moisture, etc.), dust and pests.

•You must route the various electrical cables through protective

tubes, to protect them against mechanical exertions, essentially

on the power supply cable. Please note that all the cables must

enter the central from the bottom.

•If the automatism is to be installed at a height of more than 2,5m

from the ground or other level of access, the minimum safety

and health requirements for the use of work equipment workers

at the work of Directive 2009/104/CE of European Parliament

and of the Council of 16 September 2009.

•Attach the permanent label for the manual release as close as

possible to the release mechanism.

•Disconnect means, such as a switch or circuit breaker on the

electrical panel, must be provided on the product’s fixed power

supply leads in accordance with the installation rules.

•If the product to be installed requires power supply of 230Vac

or 110Vac, ensure that connection is to an electrical panel with

ground connection.

•The product is only powered by low voltage satefy with central

(only at 24V motors)

WARNINGS FOR USERS

•Keep this manual in a safe place to be consulted whenever

necessary.

•If the product has contact with fluids without being prepared,

it must immediately disconnect from the power supply to avoid

short circuits, and consult a specialized technician.

•Ensure that technician has provided you the product manual

and informed you how to handle the product in an emergency.

•If the system requires any repair or modification, unlock the

automatism, turn off the power and do not use it until all safety

conditions have been met.

•In the event of tripping of circuits breakers of fuse failure, locate

the malfunction and solve it before resetting the circuit breaker

or replacing the fuse. If the malfunction is not repairable by

. SAFETY INSTRUCTIONS . SAFETY INSTRUCTIONS

5A 5B

ENEN

The MC60 is a control board with built-in radio control system, developed for the

automation of sliding, sectional gates, barriers or 24V electromechanical pillar.

• Power Supply 24V AC/DC

• Flashing light’s output 24VDC 4W Max.

• RGB Lightbulb’s output 24Vdc 100mA Máx.

• Motor’s output 24Vdc 180W Máx.

• Auxiliary accessories output 24V DC 8 W Máx.

• Security and BT transmitters 24V DC

• Working temperature -25°C a + 55°C

• Incorporated Radio Receptor 433,92 Mhz

• OP Transmitters 12bits or Rolling Code

• Maximum Memory Capacity 100 (full opening) - 100 (pedestrian opening)

• Control Board Dimensions 130x107 mm

consult this manual, contact a technician.

•Keep theoperationareaof themotorized gate freewhilethe gate

in in motion, and do not create strength to the gate movement.

•Do not perform any operation on mechanical elements or hinges

if the product is in motion.

RESPONSABILITY

•Supplier disclaims any liability if:

•Product failure or deformation result from improper

installation use or maintenance!

•Safety norms are not followed in the installation, use and

maintenance of the product.

•Instructions in this manual are not followed.

•Damaged is caused by unauthorized modifications

•In these cases, the warranty is voided.

SYMBOLS LEGEND:

• Important safety

notices

• Useful information

• Programming

information

• Potentiometer

information

• Connectors

information

• Buttons

information

. SAFETY INSTRUCTIONS CHARACTERISTICS

. CONTROL BOARD

107mm

130mm

6A 6B

BG R Y

V+

LK LO

V+ FCF0 LE

LS LBLA

LAMP MOT1

24v

BATT

20V

VAC

ANT

2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

BG R Y

V+

LO FCF0 LE

LS LBLA

ANT

ENEN

VAC 01 • Power Supply Input - 20Vdc

02 • Power Supply Input - 20Vdc

BATT 01 • 24Vdc Input for Emergency Bettery

02 • COM Input (Solar Panel ou Emergency Bettery)

03 • 24Vdc Input for Solar Panel

LAMP 01 • 24Vdc Flashing light's Output (max 4W)

02 • 0V Flashing light's Output

MOT1 01 • 24Vdc Motor Output (max 180W)

02 • 24Vdc Motor Output (max 180W)

V+ 01 • 24Vdc power supply output for accessories (max 8W)

02 • 0V power supply output for accessories

LK 01 • 24Vdc ElectricLock Output (max 12W)

02 • 0V ElectricLock Output

LO 01 • Full Pulsing Input (NO)

LS 01 • Pedestrian Pulsing Input (NO)

FO 01 • Closing limit-switch input

FC 01 • Opening limit-switch input

LE 01 • Exterior Photocells (NC)

LA 01 • Interior Photocells (NC)

LB 01 • NC input for emergency device

ANT 01 • Antenna

02 • GND

MENU • Access the Menu

CMD • Commands programmation

UP • Navigate through menus/values

DW • Navigate through menus/values

LO • LED ON when the full button is active

LS • LED on when the pedestrian button is

active

FO • LED OFF when the opening limit switch

is active

FC • LED OFF when closing limit switch is

active

LE • LED OFF when the signal from the

exterior photocells is interrupted

LA • LED OFF when the signal from the

interior photocells is interrupted

LB • LED OFF when the safety button is

active

BT • LED ON when the battery is connected

upside down

VDD • LED ON when power is supplied to the

microcontroller

CONNECTORS

. CONTROL BOARD BUTTONS AND LEDs

. CONTROL BOARD

BG R Y

V+

LK LO

V+ FCF0 LE

LS LBLA

LAMP MOT1

24v

BATT

20V

VAC

ANT

~ ~

V+

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

SLIDING GATES [SC]

. CONEXION SCHEME

• Motor

• Flashing Light

• Bateries

or or

• Electric Lock

• Photocells

•

Limit switch

• Pushbutton or

Key Selector (total)

• Pushbutton or Key Selector (pedestrian)

OPEN

• RGB Flashing Light

• Transformer

230Vac

120W Máx.

• Fuse

230Vac: 2Ah

115Vac: 3Ah

• Power supply

COM

BG R Y

V+

LK LO

V+ FCF0 LE

LS LBLA

LAMP MOT1

24v

BATT

20V

VAC

ANT

1 2

ANT

STRSECSIGNL R G B + -

~ ~

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

SECTIONAL DOORS [SE]

. CONEXION SCHEME

• Limit Switches Connections

• Transformer connections

• Motor

• Dock leveler

• Magnetic contact

• MX13

• MR13

OPTIONAL (security service)

• Relay

• 12V 7A Battery

• Flashing Light

• Electric Lock

• Photocell

• Maneuvering board

White

Green

Orange

Blue

Brown

Gray

Black

12V+

1 2 3

BI RI

4 5 6

GI RGI SEI

8 97

SEO

1 2

RGOROBO

2 3 4 51

GOV+

LGHI SEO

BG R Y

V+

LK LO

V+ FCF0 LE

LS LBLA

LAMP MOT1

24v

BATT

20V

VAC

ANT

~ ~

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

BARRIERS [BR]

. CONEXION SCHEME

• Barrier cover

• LED strip

(Flashing Light)

• Motor

• Barrier

• Transformer

230Vac

120W Máx.

• Fuse

230Vac: 2Ah

115Vac: 3Ah

Blue

Brown

• MC60 control board

(Interior of the barrier)

•

Limit switch

• Safety band

(Optional)

• Fita LED

(Haste)

• Power supply

12VDC

36 W

• Módulo MP106

• MP106 module

in the interior

OPEN

In case of inversion of the rod,

replace the blue wire with the

brown and the micro of the

limit switches, marked by 1

and 2.

• Photocells

• Power supply

BG R Y

V+

LK LO

V+ FCF0 LE

LS LBLA

LAMP MOT1

24v

BATT

20V

VAC

ANT

LIGHT

VR1

SEL SET

MONO TEMP. I.CMD

12V24V 0V

M1 M2 FLH FC 24v

24v

RGB

GND

~ ~

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

AUTOMATIC PILLARS [PL]

. CONEXION SCHEME

• Pillar

• MSC50

• Photocells

• 12V Battery

O MSC50 is a twilight sensor.

When turned on, the LEDs will

operate only during the night,

remaining off during the day.

If you want them to always

be connected, make a bridge

(shunt) between the "↓" and

LB of the MC60 control panel.

The use of photocells or a

magnetic loop is essential

to ensure the safety of the

automation.

• LED strip

If the LED strip

is 12V, there

must be a resistance

of 180 Ohms/5 watts

in series with the 24V

of the relay module.

•

Module

If limit switches are not used,

Shunt the FO - FC - ↓ inputs.

Red

Yellow

Black

Green

• Transformer

230Vac

120W Máx.

• Fuse

230Vac: 2Ah

115Vac: 3Ah

• Power supply

Andere Handbücher für MC60

Inhaltsverzeichnis

Andere Motorline professional Steuereinheit Handbücher

Motorline professional

Motorline professional MC41SP Bedienungsanleitung

Motorline professional

Motorline professional MC61PL Bedienungsanleitung

Motorline professional

Motorline professional MC61SE Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC61BR Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC75 Gebrauchs- und Pflegehandbuch

Motorline professional

Motorline professional MC102 Bedienungsanleitung

Motorline professional

Motorline professional MC15BA Bedienungsanleitung

Motorline professional

Motorline professional MC70 EVO Bedienungsanleitung

Motorline professional

Motorline professional MCS01 Bedienungsanleitung

Motorline professional

Motorline professional MC61PL Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MC7 Bedienungs- und Installationshandbuch

Motorline professional

Motorline professional MCONNECT SHUTTER Gebrauchs- und Pflegehandbuch

Motorline professional

Motorline professional MC70 Bedienungsanleitung

Motorline professional

Motorline professional MC112N Gebrauchs- und Pflegehandbuch

Motorline professional

Motorline professional MC4 EVO Bedienungsanleitung

Motorline professional

Motorline professional MC112PR Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung