Motorola Avigilon H4 SL Series Bedienungsanleitung

Installation Guide

Avigilon H4 SL Bullet Camera Models:

1.3C-H4SL-BO1-IR, 2.0C-H4SL-BO1-IR and 3.0C-H4SL-BO1-IR

Legal Notices

AVIGILONCONTROL CENTER, and ACC are trademarks of Avigilon Corporation. ONVIFis a trademark of

Onvif, Inc. Other names or logos mentioned herein may be the trademarks of their respective owners. The

absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of

ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the

United States of America and other jurisdictions worldwide (see avigilon.com/patents). Unless stated

explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark,

patent or other intellectual property rights of Avigilon Corporation or its licensors.

Disclaimer

This document has been compiled and published using product descriptions and specifications available at

the time of publication. The contents of this document and the specifications of the products discussed

herein are subject to change without notice. Avigilon Corporation reserves the right to make any such

changes without notice. Neither Avigilon Corporation nor any of its affiliated companies: (1) guarantees the

completeness or accuracy of the information contained in this document; or (2) is responsible for your use

of, or reliance on, the information. Avigilon Corporation shall not be responsible for any losses or damages

(including consequential damages) caused by reliance on the information presented herein.

Avigilon Corporation

avigilon.com

PDF-H4SLBO-A

Revision: 6 - EN

20190412

Important Safety Information

This manual provides installation and operation information and precautions for the use of this device.

Incorrect installation could cause an unexpected fault. Before installing this equipment read this manual

carefully. Please provide this manual to the owner of the equipment for future reference.

This Warning symbol indicates the presence of dangerous voltage within and outside the product

enclosure that may result in a risk of electric shock, serious injury or death to persons if proper

precautions are not followed.

This Caution symbol alerts the user to the presence of hazards that may cause minor or moderate

injury to persons, damage to property or damage to the product itself if proper precautions are not

followed.

WARNING — Failure to observe the following instructions may result in severe injury or death.

lInstallation must be performed by qualified personnel only, and must conform to all local codes.

lFor EN 50121-4 compliance, this product is intended to be supplied by a EN 50121-4 power source.

lThis product is intended to be supplied by Power over Ethernet (PoE) that is a “Limited Power

Source” or “LPS”, rated 48 VDC, 9W min.

lAny external power supply connected to this product may only be connected to another Avigilon

product of the same model series. External power connections must be properly insulated.

lDo not connect directly to mains power for any reason.

CAUTION — Failure to observe the following instructions may result in injury to persons or damage

to the device.

lDo not install near any heat sources such as radiators, heat registers, stoves, or other sources of heat.

lDo not subject the device cables to excessive stress, heavy loads or pinching.

lDo not open or disassemble the device. There are no user serviceable parts.

lRefer all device servicing to qualified personnel. Servicing may be required when the device has

been damaged (such as from a liquid spill or fallen objects), has been exposed to rain or moisture,

does not operate normally, or has been dropped.

lDo not use strong or abrasive detergents when cleaning the device body.

lUse only accessories recommended by Avigilon.

lThis product should be installed in restricted access locations.

iii

Regulatory Notices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

lReorient or relocate the receiving antenna.

lIncrease the separation between the equipment and the receiver.

lConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

lConsult the dealer or an experienced radio/TV technician for help.

Changes or modifications made to this equipment not expressly approved by Avigilon Corporation or

parties authorized by Avigilon Corporation could void the user’s authority to operate this equipment.

Disposal and Recycling Information

When this product has reached the end of its useful life, please dispose of it according to your local

environmental laws and guidelines.

Risk of fire, explosion, and burns. Do not disassemble, crush, heat above 100 °C (212 °F), or incinerate.

European Union:

This symbol means that according to local laws and regulations your product should be disposed of

separately from household waste. When this product reaches its end of life, take it to a collection point

designated by local authorities. Some collection points accept products for free. The separate collection

and recycling of your product at the time of disposal will help conserve natural resources and ensure that it

is recycled in a manner that protects human health and the environment.

Table of Contents

Overview 1

Mounting Bracket View 1

Rear View 2

Front View 3

Configuration Panel View 4

Side View 5

Installation 6

Camera Package Contents 6

Installation Steps 6

Mounting the Bullet Camera 6

Removing the Configuration Panel Cover 10

(Optional) Using the USB Wi-Fi Adapter 10

Assigning an IP Address 10

Accessing the Live VideoStream 11

Aiming the Camera 11

(Optional) Configuring microSD Card Storage 12

Configuring the Camera 13

For More Information 13

Connection Status LED Indicator 14

Resetting to Factory Default Settings 15

Setting the IP Address Using the ARP/Ping Method 16

Specifications 17

Limited Warranty and Technical Support 19

Overview

Mounting Bracket View

1. Camera mounts

Points for installing the camera to the mounting bracket.

2. Mounting hook slots

Points to hold the camera to the mounting bracket while connecting the required cables.

3. Mounting holes

Holes for securing the mounting bracket to the mounting surface.

Overview 1

Rear View

1. Ethernet port

Accepts power and Ethernet connection to the network.

The camera can only be powered by Power over Ethernet (PoE). Server communication and image

data transmission also occur over this connection.

2. Serial number tag

Device information, product serial number and part number label.

3. Camera mounting screws

Screws for mounting the camera to the mounting bracket.

4. Mounting hooks

Hooks to attach the camera to the mounting bracket while connecting the required cables.

Rear View 2

Front View

1. IR illuminator

Provides scene illumination in the IR spectrum.

2. Configuration panel cover

Covers the configuration panel.

Front View 3

Configuration Panel View

1. microSD card slot

Accepts a microSD card for onboard storage.

2. Micro USB port

Accepts a micro USB to USB adapter. Only required when using the Avigilon USB Wi-Fi Adapter.

3. Link LED indicator

Indicates if there is an active connection in the Ethernet port.

4. Connection status LED indicator

Provides information about device operation. For more information, see Connection Status LED

Indicator on page14.

Configuration Panel View 4

Side View

1. Sun shroud

An adjustable cover to help protect the lens against glare from the sun.

2. Mount arm

Adjustable mount arm for positioning the camera.

3. Adjustment screws

Provides a locking mechanism for the mount arm.

Side View 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Motorola Sicherheitskamera Handbücher

Motorola

Motorola HMEZ2000 - Homesight Wireless Home Security... Bedienungsanleitung

Motorola

Motorola FOCUS88 Bedienungsanleitung

Motorola

Motorola FOCUS66-B Fehlerbehebungshandbuch

Motorola

Motorola iDEN NTN9298 Bedienungsanleitung

Motorola

Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Bedienungsanleitung

Motorola

Motorola HMWL1010 Bedienungsanleitung

Motorola

Motorola hellosecurity Bedienungsanleitung

Motorola

Motorola Avigilon H4SL-MT-NPTA Bedienungsanleitung

Motorola

Motorola HMWC1020 Bedienungsanleitung

Motorola

Motorola FOCUS89-2 Bedienungsanleitung

Motorola

Motorola Avigilon H4 Series Bedienungsanleitung

Motorola

Motorola MTIDP042611 Bedienungsanleitung

Motorola

Motorola Avigilon H4M-MT-DCIL Bedienungsanleitung

Motorola

Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Anleitung zur Verwendung

Motorola

Motorola Avigilon 2.0C-H5A-B1 Bedienungsanleitung

Motorola

Motorola FOCUS88 Bedienungsanleitung

Motorola

Motorola L6Q Technisches Datenblatt

Motorola

Motorola SCOUT73 Bedienungsanleitung

Motorola

Motorola HMWC1020 Bedienungsanleitung

Motorola

Motorola FOCUS66-B2 Bedienungsanleitung

Motorola

Motorola Avigilon H4A-D1 Bedienungsanleitung

Motorola

Motorola Avigilon H4 Series Bedienungsanleitung

Motorola

Motorola Avigilon H4A-ETD-KIT Bedienungsanleitung

Motorola

Motorola EASY START KIT HMEZ1000 - CELL PHONE SET UP Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung