Motorola Talkabout T5022 Bedienungsanleitung

English

CONTENTS

PRODUCT SAFETY AND RF EXPOSURE

FOR PORTABLE TWO-WAY RADIOS

Charger Safety Instructions . . . . . . . . . . . . . . . . .3

GETTING STARTED

Your New Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Batteries and Battery Charging . . . . . . . . . . . . . .5

Turning Your Radio On and Off . . . . . . . . . . . . . .6

Battery Meter and Battery Alert . . . . . . . . . . . . . . 6

Belt Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

TALKING AND LISTENING

Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Talk Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Monitoring Channel Activity . . . . . . . . . . . . . . . . . 7

Selecting a Radio Channel . . . . . . . . . . . . . . . . . 8

Interference Eliminator Code . . . . . . . . . . . . . . . . 8

Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Nuisance Delete . . . . . . . . . . . . . . . . . . . . . . . . . 8

Hands Free Use (VOX) . . . . . . . . . . . . . . . . . . . . 9

Time-out Timer . . . . . . . . . . . . . . . . . . . . . . . . . 10

Keypad Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

ALERTS

Channel Busy Indicator . . . . . . . . . . . . . . . . . . .11

Call Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Talk Confirmation Tone . . . . . . . . . . . . . . . . . . .11

FURTHER INFORMATION

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .12

Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Warranty Information . . . . . . . . . . . . . . . . . . . . .14

APPROVED ACCESSORIES LIST

Approved Accessories List . . . . . . . . . . . . . . . . .16

6864239V01_EN.fm Page 1 Monday, May 15, 2006 11:53 AM

English

PRODUCT SAFETY AND

RF EXPOSURE FOR PORTABLE

TWO-WAY RADIOS

ATTENTION!

Before using this product, read the RF energy

awareness information and operating instructions in

the Product Safety and RF Exposure booklet to ensure

compliance with RF energy exposure limits.

Before using this product, read the

operating instructions for safe usage

contained in the Product Safety and RF

Exposure booklet enclosed with your

radio.

C a u t i o n

6864239V01_EN.fm Page 2 Monday, May 15, 2006 11:53 AM

English

Charger Safety Instructions

Before using the battery charger, read all instructions

and cautionary markings on:

• the battery

• the battery charger, and

• the radio using the battery.

To reduce the risk of injury, only

charge the Motorola approved

rechargeable battery for this product.

Other types of batteries may burst,

causing personal injury and damage.

SAVE THESE INSTRUCTIONS

1.Do not expose the charger to rain or snow.

2.Do not operate or disassemble the charger if it has

received a sharp blow, or has been dropped or

damaged in any way.

3.Never alter the AC cord or plug provided with the

unit. If the plug will not fit the AC outlet, have the

proper outlet installed by a qualified electrician. An

improper condition can result in a risk of electric

shock.

4.To reduce the risk of damage to the cord or plug, pull

the plug rather than the cord when disconnecting the

charger from the AC outlet

5.To reduce the risk of electric shock, unplug the

charger from the AC outlet before attempting any

maintenance or cleaning.

6.Use of an attachment not recommended or sold by

Motorola may result in a risk of fire, electric shock, or

personal injury.

7.Make sure the cord is located so it will not be

stepped on, tripped over, or subjected to damage or

stress.

8.An extension cord should not be used unless

absolutely necessary. Use of an improper extension

cord could result in a risk of fire and/or electric

shock. If an extension cord must be used, make

sure:

• That the pins on the plug of the extension cord are the

same number, size, and shape as those on the plug of

the charger.

• That the extension cord is properly wired and in good

electrical condition, and

• That the cord size is 18 AWG (1 mm

) for lengths up to

100 feet (30 metres) and 16 AWG (1.3 mm

) for lengths

up to 150 feet (45 metres).

9.The supply cord of this charger cannot be replaced.

If the cord is damaged please return to your place of

purchase.

C a u t i o n

6864239V01_EN.fm Page 3 Monday, May 15, 2006 11:53 AM

English

GETTING STARTED

Use

to:

• Turn radio on/off

• Adjust volume

Use

to:

• Transmit call tone

Use

to:

• Scroll through menus

• Lock and unlock the keypad

(when held down and not in a

menu)

LED Indicator Light

Use

to:

• Talk

• Save a setting

Accessory Jack Cover

Use

to:

• Monitor channel activity

• Scan

Use

[

and

]

to:

• Scroll through available settings

Microphone

Speaker

6864239V01_EN.fm Page 4 Monday, May 15, 2006 11:53 AM

English

Your New Radio

The Motorola T5022 two-way radio operates on

PMR446 frequencies, and can be used in any country

where PMR446 frequencies are authorized, subject to

applicable regulations. This license-free, two-way radio

service is for family and group recreational use. Use of

this radio outside the country where it was intended to

be distributed is subject to government regulations and

may be prohibited. Read this manual carefully and

make sure you know how to operate the radio properly

before use.

Please retain your original dated sales receipt for your

records. For warranty service of your Motorola two-way

radio you will need to provide a copy of your dated

sales receipt to confirm warranty status.

Batteries and Battery Charging

The radio operates with 3 AA Alkaline batteries or a

Nickel-Metal Hydride (NiMH) rechargeable battery

pack (supplied with your radio).

Caution: Do not disassemble the NiMH battery

pack.

Note: Remove batteries before storing your radio for

extended periods. Batteries corrode over time

and may cause permanent damage to your

radio. Exercise caution when handling batteries

that are leaking. Dispose of exhausted batteries

at a designated battery disposal unit and not in

the household waste.

Installing the Batteries

1.Lift battery latch to release the battery cover.

2.Insert 3 AA batteries as shown by the markings

inside the battery compartment. Alternatively insert

the NiMH pack so that the charge contacts are facing

outwards to connect with contacts on the battery

cover.

3.Reposition battery cover and press down until it

clicks into place.

Charging Desk Stand

The charging desk stand provides drop-in charging

convenience. The charging desk stand can be placed

on any flat surface, such as a desk or workbench.

Charge the NiMH battery overnight (16 hours) before

using it for the first time.

1.With the radio OFF, remove the battery cover.

2.Insert the battery pack as indicated on the battery

pack label.

3.Replace the battery cover.

4. Plug the wire on the AC power supply into the plug

on the desk stand.

5.Plug the AC power supply into a standard wall

socket.

6.Slide the radio into one of the desk stand charging

pockets, facing forward. The red light will glow if the

radio is properly inserted.

6864239V01_EN.fm Page 5 Monday, May 15, 2006 11:53 AM

English

7.The radio/battery will be fully charged within 14

hours.

You can also charge the battery pack separately from

the radio,as follows:

1.Plug the wire on the AC power supply into the plug

on the desk stand.

2.Plug the AC power supply into a standard wall outlet.

3.Insert the battery pack into the desk stand charging

pocket using the charging pocket insert provided.

4.Make sure that the contacts on the side of the

battery pack align with the metal contacts in the

pocket of the desk stand. The red light will glow if

they have been properly inserted.

The radio/battery will be fully charged within 14 hours.

Charging Status

5.The solid red light indicator shows that the radio and/

or the NiMH battery is charging. A depleted battery

will recharge to full capacity within 14 hours.

Note: When moving between hot and cold

environments, do not charge the battery until

the battery temperature acclimates (usually

about 20 minutes). For optimal battery life,

remove the radio or battery from the charger

within 16 hours. Do not store the radio or the

battery in the charger.

Turning Your Radio On and Off

1.Turn Pclockwise to turn your radio on.

2.The radio chirps and the display will show all feature

icons that your radio has available for a brief period.

The display will show the channel 1.8, the

interference eliminator code 0.38 and the battery

meter.

3.Turn Panticlockwise to turn your radio off.

Battery Meter and Battery Alert

The battery meter located in the top left hand corner of

the display indicates how much battery power you have

remaining. The radio will power off when the voltage

drops below a predetermined level, to protect the

rechargeable battery. When the battery meter displays

c, the radio chirps every 10 minutes and after

releasing M.

Battery Life

The approximate (typical) battery life for:

• AA Alkaline batteries is 35 hours

•

NiMH

batteries is 14.5 hours

This is based on a 5% transmit, 5% receive and 90%

standby cycle.

Note: Battery life will be reduced if you regularly use

Hands-Free (VOX) accessories.

6864239V01_EN.fm Page 6 Monday, May 15, 2006 11:53 AM

English

Belt Clip

Your radio comes with a swivel belt

clip.

1.To attach, align belt clip post with

hole in the radio back and gently

push until it clicks into place.

2.To remove, push release tab on

top of belt clip down to release

catch and pull belt clip from the

radio back.

TALKING AND LISTENING

Your radio has 8 channels and 38 interference

eliminator codes. If you are in a group and you wish to

talk to each other, all radios must be set to the same

channel and code. If you experience interference and

need to change channel, ensure that you change the

channel and code of all radios in your group.

1.For maximum clarity, hold radio 5 to 7 centimetres

from mouth.

2.Press and hold Mand speak into the microphone.

The LED indicator light glows continuously when

transmitting.

3.To receive messages, release M.

Volume

1.Use Pto adjust your volume to a comfortable listen-

ing level.

Talk Range

Your radio has been designed to maximize

performance and improve transmission range in the

field. It is recommended that you do not use the radios

closer than 1.5 meters apart, to avoid interference.

Talk range depends on the terrain. It will be affected by

concrete structures, heavy foliage and by operating

radios indoors or in vehicles.

Optimal range occurs in flat, open areas, with up to

6 kilometres of coverage. Medium range occurs when

buildings and trees are in the way. Minimal range

occurs when dense foliage and mountains obstruct the

communication path.

Monitoring Channel Activity

It is good radio etiquette to monitor the channel for

activity before you transmit, to ensure that you do not

interrupt other users already on the channel.

Pressing and holding Jallows you to monitor your

channel for activity. If you hear static, the channel is

clear for use. Obstacles that block the signal path may

affect the strength of the incoming signal.

Optimal Range

Outdoors Medium Range

Outdoors Minimal Range

Outdoors

Flat, open areas Buildings or trees.

Also near

residential

buildings

Dense foliage or

mountains. Also

inside some

buildings

6864239V01_EN.fm Page 7 Monday, May 15, 2006 11:53 AM

English

Selecting a Radio Channel

1.Press \. The channel number will begin to flash.

2.Use ]or [to change channel.

3.Press Mto set new channel.

Interference Eliminator Code

Interference eliminator codes help minimize

interference by providing you with a choice of code

combinations.You can specify a different code for each

channel.

1.Press \until the code number begins to flash.

2.Use ]or [to change the code.

3.Press Mto set new code.

You can specify a different code for each channel:

1.To set a channel and code combination, press \

and then press ]or [to select the channel.

2.Press \again and then press ]or [to select

a code.

3.Press Mor press and hold \to exit the menu

and to save the channel and code combination.

4.To set another channel and code combination,

repeat these steps.

Scan

1.To start scanning, briefly press and release the

Jbutton.

2.If you activate scan while your code is set to 0, then

the radio will check for any activity on each channel,

regardless of the code in use on that channel.

3.If you activate scan while the code is set on 1to 38,

the radio will only check for activity on the specific

channel and code combinations that are set on your

radio.

4.While the radio is scanning, hwill be displayed and

the radio will scroll through the channels.

5.When activity is detected on a channel, the radio will

stop scanning and you will hear whatever transmis-

sions are detected. The radio’s display will show the

channel and code on which activity was detected.

6.If you want to respond to the transmission, press M

within 5 seconds.

7.The radio will resume scanning after 5 seconds of

inactivity on the channel.

8.If scan stops on a channel that you don’t want to lis-

ten to,briefly press ]or [to resume scanning for

the next active channel.

9.To stop scanning, briefly press and release J.

Nuisance Delete

1.If scan continuously stops on an undesired channel,

press and hold ]or [for at least 3 seconds, then

release. This will temporarily remove the undesired

channel from the scan list.

6864239V01_EN.fm Page 8 Monday, May 15, 2006 11:53 AM

English

2.To restore the channel to the scan list, turn the radio

off and then on.

3.You cannot remove your home channel from the

scan list (your home channel is the channel your

radio was set to when you activated scan).

Hands Free Use (VOX)

VOX allows you to talk "hands

free" when used withoptional

accessories connected to the

radio.

Note: When using audio

accessories with your

radio, turn the volume of

your radio down before

you place the accessory

on your head or in your

ear.

How To Use The VOX Feature

1.Switch off your radio.

2.Insert the plug of the audio accessory into the

accessory jack.

3.Switch on your radio. The flashing gicon will

appear in the display to indicate that the VOX feature

is active.

4.To transmit, speak into the accessory microphone.

To receive, stop talking.

5.Pressing Mor removing audio accessory will

disable VOX operation.

Note: There is a short delay after you start talking,

before the radio transmits.

Setting the Sensitivity Level

Adjusting the VOX and/or microphone sensitivity level

helps to minimize the possibility of unintended noises

triggering a transmission, or enhances the ability to pick

up quiet voices.

If an accessory is fitted to your radio these instructions

will help you to adjust the VOX sensitivity. If no

accessory is fitted the microphone sensitivity will be

adjusted.

1.Press \until gand a flashing number appear in

the display.

2.Select sensitivity level of 1, 2or 3by using ]or

1- If you speak loudly, or are in a noisy environment.

2- Suitable for most applications.

3- If you speak softly, or are in a quiet environment.

Note: When you connect a VOX accessory, the radio

will automatically be set to the last chosen VOX

sensitivity level.

The T5022 also has a built in Internal Voice Operated

Transmission capability. This is a similar function to the

VOX because the sound of your voice activates

transmission, but no external accessories are needed.

Selecting the Internal VOX Feature

Either:

1.Press \until the flashing gicon appears in the

display and the channel number is replaced with Y

(enabled) or n(disabled).

2.Use the up ]or down [button to select Yfor

enable.

6864239V01_EN.fm Page 9 Monday, May 15, 2006 11:53 AM

English

3.Press Mto select.

or:

1.Ensure radio is turned off.

2.Press and hold down Mand switch on the radio

using P. The gicon will be shown on the display.

To Use the Internal VOX Feature

1.Quickly press and release Mand the gicon will

begin to flash. Your radio will now transmit every

time you talk.

2.To disable the Internal VOX feature, press \until

the flashing gicon appears in the display and use

the up ]or down [button to select nfor dis-

able. Or switch the radio off and then back on again.

Selecting Internal VOX Sensitivity

1.Ensure that the gicon is showing on the display.

2.Press \until gand a flashing number appear in

the display

3.Select sensitivity level of 1, 2or 3by using ]or

Time-out Timer

The Time-out Timer feature helps extend battery life by

preventing the radio from accidentally transmitting. The

radio will emit a continuous warning tone after Mis

pressed for 60 continuous seconds and will stop

transmitting.

Keypad Lock

The keypad lock disables the \, ]and [

buttons. It also disables the scan function but allows

use of the J, M, ^buttons and and to turn the

radio on and off.

1.To lock or unlock the keypad press and hold the \

button for three seconds. When the radio is locked

fwill show in the display.

Backlight

Your radio has a backlight which turns on when a

button is pressed and turns off automatically 4 seconds

after you last pressed a button.

6864239V01_EN.fm Page 10 Monday, May 15, 2006 11:53 AM

Inhaltsverzeichnis

Sprachen:

Andere Motorola Zwei-Wege-Funkgerät Handbücher

Motorola

Motorola CLR Series Bedienungsanleitung

Motorola

Motorola Talkabout T11 Seies Bedienungsanleitung

Motorola

Motorola APX 6000XE 1 Bedienungsanleitung

Motorola

Motorola T80 Bedienungsanleitung

Motorola

Motorola Spirit MU22CV Bedienungsanleitung

Motorola

Motorola CLS1410 Bedienungsanleitung

Motorola

Motorola CLP series Bedienungsanleitung

Motorola

Motorola ASTRO APX 6000 2 Bedienungsanleitung

Motorola

Motorola DTR410 - On-Site Digital Radio Bedienungsanleitung

Motorola

Motorola Talkabout FV725 Bedienungsanleitung

Motorola

Motorola FV200 Series Bedienungsanleitung

Motorola

Motorola RDU4160d Bedienungsanleitung

Motorola

Motorola ATS 2500p Bedienungsanleitung

Motorola

Motorola T80 Bedienungsanleitung

Motorola

Motorola RDM series MURS Bedienungsanleitung

Motorola

Motorola APX 1000 MODEL 1 Bedienungsanleitung

Motorola

Motorola CP185 Series Bedienungsanleitung

Motorola

Motorola APX900 2 Bedienungsanleitung

Motorola

Motorola APX4000 XH Bedienungsanleitung

Motorola

Motorola EX600 XLS Bedienungsanleitung

Motorola

Motorola APX 8000XE Referenzhandbuch

Motorola

Motorola SPIRIT GT Bedienungsanleitung

Motorola

Motorola MILESTONE 3 Bedienungsanleitung

Motorola

Motorola VL50 Bedienungsanleitung

Beliebte Zwei-Wege-Funkgerät Handbücher anderer Marken

Midland

Midland 70-1526A/B Bedienungsanleitung

HYT

HYT TC700 Bedienungsanleitung

DNT

DNT Space100 Bedienungsanleitung

Legacy

Legacy ProLine Series Bedienungsanleitung

Evolveo

Evolveo FreeTalk XM2-2 Bedienungsanleitung

AWC

AWC AWR1688+ Bedienungsanleitung

Cobra

Cobra 2-Way Radio Bedienungsanleitung

Klutch

Klutch KR-400 Bedienungsanleitung

Garmin

Garmin Rino 655t Bedienungsanleitung

Midland

Midland MXT275J Bedienungsanleitung

Titan

Titan TR200 Bedienungsanleitung

Cobra

Cobra CXT645 Bedienungsanleitung

Tait

Tait TM9100 Bedienungsanleitung

Yaesu

Yaesu FT-65R Bedienungsanleitung

Uniden

Uniden FRS550W Bedienungsanleitung

Crosley

Crosley RDR3500U Bedienungsanleitung

HME

HME XLR Series Bedienungsanleitung

ToooAir

ToooAir TA-M10 Bedienungsanleitung