Motorola AP 6522M Bedienungsanleitung

AP 6522M Access Point

INSTALLATION GUIDE

2AP 6522M Access Point

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered

trademark of Symbol Technologies, Inc., a Zebra Technologies company.

Installation Guide 3

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.0 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.3 Access Point Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.4 Wall Mount Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.4.1 Wall Mount Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.4.2 Wall Mount Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.5 Suspended Ceiling T-Bar Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.5.1 Suspended Ceiling T-Bar Mount Procedure. . . . . . . . . . . . . . . . . . . . . . . . 12

2.6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.0 Initial Access Point Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4.0 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1 AP 6522M Integrated Antenna Model Electrical Characteristics . . . . . . . . . . . . . 25

4.2 AP 6522M Integrated Antenna Model Physical Characteristics . . . . . . . . . . . . . . 25

4.3 Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.0 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.1 Wireless Device Country Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.1.1 Country Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.1.2 Frequency of Operation - FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.1.2 Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.2 Health and Safety Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.2.1 Warnings for Use of Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.1.2 Potentially Hazardous Atmospheres - Fixed Installations . . . . . . . . . . . . . 28

4AP 6522M Access Point

5.1.3 Safety in Hospitals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.3 RF Exposure Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.3.1Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.4 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.5 RF Radio Frequency Requirements - FCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.5.1 Radio Transmitters (Part 15) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.1.2 Radio Frequency Interference Requirements - Canada . . . . . . . . . . . . . . . 31

5.6 RF CE Marking and European Economic Area (EEA) . . . . . . . . . . . . . . . . . . . . . . . . 32

5.6.1 Statement of Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

5.7 RF Waste electrical and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . 33

5.7.1 Turkish WEEE Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . 34

5.8 Other Countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6.0 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

7.0 Symbol Technologies End-User Software License Agreement . . . . . . . . . 38

Installation Guide 5

1 Introduction

The AP 6522M Access Point, a component of the wireless controller system, links wireless 802.11abgn devices to

the controller, enabling the growth of your wireless network with a cost effective alternative to standard Access

Points. The AP 6522M Access Point provides multiple deployment options.

The AP 6522M Access Point receives all power and transfers data through the same CAT-5 or better Ethernet

cable. An 802.3af Ethernet switch or power supply (specifically rated for the AP 6522M) is required (Part No.

PWRS-14000-148R).

An AP 6522M model Access Point uses WiNG software as its onboard operating system. The Access Point’s

unique WiNG 5 software enables the Access Point to function as either a Virtual Controller AP capable of

adopting and managing up to 24 additional AP 6522M Access Points, a Standalone Access Point, or a Dependent

mode Access Point managed by its connected controller.

The AP 6522M Access Point is approved under MODEL: AP-0622.

This document is written for the qualified network device installer.

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:

NOTE Tips, hints, or special requirements that you should take note of.

CAUTION Care is required. Disregarding a caution can result in data loss or

equipment malfunction.

WARNING! Indicates a condition or procedure that could result in personal injury or

equipment damage.

6AP 6522M Access Point

1.2 Warnings

• Read all installation instructions and site survey reports, and verify correct equipment installation before

connecting the Access Point.

• Remove jewelry and watches before installing this equipment.

• Verify the unit is grounded before connecting it to the power source.

• Verify any device connected to this unit is properly wired and grounded.

• Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment

operation specifications.

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment placement, power

drops, and so on.

• Assign installation responsibility to the appropriate personnel.

• Identify and document where all installed components are located.

• Ensure adequate, dust-free ventilation to all installed equipment.

• Identify and prepare Ethernet and console port connections.

• Verify cable lengths are within the maximum allowable distances for optimal signal transmission.

1.4 Package Contents

An AP 6522M Access Point ships with the following:

• AP 6522M Access Point with internal antennas

• AP 6522M Access Point Installation Guide (This Guide)

Installation Guide 7

1.4.1 Features

• 2 RJ-45 connectors, one for 10/100/1000 Ethernet and the other for the serial/console connector

• LED indicators

• Slots for wall mounting

• Clips for mounting on a suspended ceiling T-bar (internal antenna model only) with separately orderable

accessories

The AP 6522M Access Point has one RJ-45 connector supporting an 10/100/1000 Ethernet port and accepts

802.3af-compliant power from an external source. The illustration below is of an integrated antenna model.

The AP 6522M Access Point comes with dual radios supporting 802.11abgn. The Access Point contains runtime

firmware which enables the unit to boot after a power up. The runtime firmware on the Access Point and the

firmware downloaded from the connected controller can be updated via the Ethernet interface.

NOTE When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable

is recommended for Gigabit operation.

8AP 6522M Access Point

2 Hardware Installation

2.1 Installation Instructions

The AP 6522M Access Point mounts either on a wall (with customer supplied M4 x 25 pan head screws and wall

anchor - or equivalent) or on a suspended ceiling T-bar. An AP 6522M is not designed for mounting on a desk.

To prepare for the installation:

1. Match the model number on the purchase order with the model numbers in the packing list and on the

case of the Access Point.

2. Verify the contents of the box include the intended AP 6522M Access Point, and the included hardware

matches the package contents on page 5.

3. Review site survey and network analysis reports to determine the location and mounting position for the

Access Point.

4. Connect a CAT-5 or better Ethernet cable to a compatible 802.3af power source and run the cable to the

installation site. Ensure there is sufficient slack on the cable to perform the installation steps.

Part Number Description

AP-6522M-66030-WR Dual 802.11n radio AP 6522M. Plastic enclosure with internal antennas.

For use in Japan only.

NOTE In the above part numbers, acountry code of “WR” represents a world

wide model, whereas “US” defines the model as only legally deployable

in the United States.

NOTE When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable

is recommended for Gigabit operation.

Installation Guide 9

2.2 Precautions

Before installing an AP 6522M model Access Point, verify the following:

• If a DC power supply is used, ensure it’s the approved power supply for the AP 6522M

(PWRS-14000-148R).

• It is recommended you do not to install the AP 6522M in wet or dusty areas.

• Verify the environment has a continuous temperature range between 0° C to 40° C.

2.3 Access Point Placement

For optimal performance, install the Access Point away from transformers, heavy-duty motors, fluorescent lights,

microwave ovens, refrigerators and other industrial equipment. Signal loss can occur when metal, concrete, walls

or floors block transmission. Install the Access Point in an open area or add Access Points as needed to improve

coverage.

Antenna coverage is analogous to lighting. Users might find an area lit from far away to be not bright enough. An

area lit sharply might minimize coverage and create dark areas. Uniform antenna placement in an area (like even

placement of a light bulb) provides even, efficient coverage.

Place the Access Point using the following guidelines:

• Install the Access Point at an ideal height of 10 feet from the ground.

• Orient the Access Point for optimal performance.

To maximize the Access Point’s radio coverage area, it is recommended to conduct a site survey to define and

document radio interference obstacles before installing the Access Point.

2.4 Wall Mount Instructions

Wall mounting requires hanging the AP 6522M along its width or length using the two slots on the bottom of the

unit. The AP 6522M can be mounted on to any plaster, wood, or cement wall surface using customer supplied screw

hardware (M3.5 x 0.6 x 20 mm- or equivalent).

2.4.1 Wall Mount Hardware

• Two wide-shoulder Phillips pan head self-tapping screws (customer supplied)

• Two wall anchors (customer supplied)

NOTE The following screws are recommended: (ANSI Standard) #6-18 X

0.875in. Type A or AB Self-Tapping Screw, or (ANSI Standard Metric)

M3.5 X 0.6 X 20mm Type D Self-Tapping Screw.

10 AP 6522M Access Point

2.4.2 Wall Mount Procedure

1. Orient the case on the wall by its width or length.

2. Mark two points (for drill holes) 4.08 inches (103.7 mm) apart on a horizontal or vertical line depending on

the desired cable exit direction. If mounted on a horizontal line, the cables will exit to the left or right. If

mounted on a vertical line, the cables will exit up or down.

3. At each point, drill a hole in the wall, insert an anchor, screw into the anchor the wall mounting screw and

stop when there is 1mm between the screw head and the wall.

4. Attach an Ethernet cable from the Access Point to a controller with an 802.3af-compatible power source

or use the PWRS-14000-148R power supply to supply power to the AP 6522M (once fully cabled).

CAUTION To ensure proper operation of an AP 6522M Access Point, ensure it is

mounted in the correct orientation for the desired cable routing.

NOTE When pre-drilling a hole the recommended hole size is 2.8mm (0.11in.).

Andere Handbücher für AP 6522M

Inhaltsverzeichnis

Andere Motorola Drahtloser Zugangspunkt Handbücher

Motorola

Motorola AP 5131 - Wireless Access Point Bedienungsanleitung

Motorola

Motorola AP-5181 - Wireless Access Point Bedienungsanleitung

Motorola

Motorola AP 5131 - Wireless Access Point Bedienungsanleitung

Motorola

Motorola MC-802 Bedienungsanleitung

Motorola

Motorola AP-650 Series Bedienungsanleitung

Motorola

Motorola AP-621 Series Bedienungsanleitung

Motorola

Motorola Solutions WiNG 5.2.6 Bedienungsanleitung

Motorola

Motorola AP 5131 - Wireless Access Point Bedienungsanleitung

Motorola

Motorola AP-7562 Bedienungsanleitung

Motorola

Motorola AP-8132 Bedienungsanleitung

Motorola

Motorola AP-7532 Bedienungsanleitung

Motorola

Motorola AP-6521 Series Bedienungsanleitung

Motorola

Motorola WS2000 - Wireless Switch - Network Management... Bedienungsanleitung

Motorola

Motorola 5440AP - Canopy 5.4 GHz AP Betriebsanleitung

Motorola

Motorola AP-7131 Series Installations- und Betriebshandbuch

Motorola

Motorola MOTOwi4 25600 Handbuch

Motorola

Motorola AP 7161 Bedienungsanleitung

Motorola

Motorola AP6522 Bedienungsanleitung

Motorola

Motorola AP 6522M Bedienungsanleitung

Motorola

Motorola PMP 320 Handbuch

Motorola

Motorola AP-650 Series Bedienungsanleitung

Motorola

Motorola PTP 600 Series Bedienungsanleitung

Motorola

Motorola 5750APUSG Bedienungsanleitung

Motorola

Motorola WA840G Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung