Mounting Dream MD2268-S Bedienungsanleitung
Max VESA: 200 X 200 mm/8X8"
Please read this instruction carefully before installation.
MODEL:MD2268-S
INSTALLATION INSTRUCTION
Thank you for purchase!We strive to provide products and services of exceptional quality.
We sincerely invite you to write an unbiased review. For parts missed or installation problems,
please contact us at telephone (626) 604-9048 (USA) Mon - Fri 10am - 6pm (Pacific time) or email
us by customerservice@mountingdream.com , so that we may solve the issue for you. (A9)
Fits for most 17-42 inches Plasma, LCD and LED TVs.
Weight capacity: 20 kg(44 LBS).
US WARNING!
Safety Warning: Thank you for choosing Mounting Dream TV mount. For
safe application of model MD2268-S, and preventing yourself or others
from danger or property loss, please read through this manual before use.
If you do not understand these instructions or have any doubt over safety
of installation, please contact qualified contractor or Mounting Dream
customer service. Please check carefully before assembly to ensure no
parts missed or damaged. Our customer service representative will assist
you timely in installation to solve the issue of parts shortage or damage.
Replacement parts purchased through authorized distributor will be
delivered to your door. Please do not use defective parts. Incorrect
installation may result in product damage or body injury. Do not apply this
product to any purpose not indicated by Mounting Dream. We shall bear
no responsibility for any damage or injury resulted from incorrect
installation, incorrect assembly or misuse.
Advertencia de seguridad: Gracias por su opción del producto de soportes
para televisión de la marca Kongzhongshijie, para garantizar el uso en
seguro del modelo MD2268-S, evitar al usuario y otras personas sufriendo
riesgo de peligrosidad y daños a la propiedad, antes de usar , por favor,
lea bien este manual. Si usted no entiende estas instrucciones o existe
dudas sobre la seguridad de la instalación, por favor llame a un contratista
calificado o Centro de servicio al cliente, Antes de asemblar, verifique
cuidadosamente para asegurarse de que no encuentre la falta de piezas o
piezas defectuosos , nuestros representantes deservicio al cliente le
ayudará con rapidez para los problemas de instalación ,para resolver los
problemas de la falta y daño de las piezas. En el caso de que los
productos se vendan a través de distribuidores autorizados, las piezas de
repuestos serán entregados directamente a su domicilio , no utilice piezas
defectuosas , la instalación inadecuada puede causar daños o lesiones
graves. No utilizar este producto para cualquier otro propósito que fuera
de sus instrucciones, la compañía no es la responsable de los daños o las
pérdidas de la mala instalación , la asamblea incorrecta o uso incorrecto.
ADVERTENCIA!
ES
Before getting started, let's make sure this mount is
perfect for you!
1 Is your TV VESA equal to/greater than 75x75mm/3x3in and
equal to/less than 200x200mm/8x8in?
MAX:200mm/8"
MAX:
200mm/8"
2 Does your TV (including accessories) weigh more than
44 lbs (20kg)?
44 lbs
(20kg)
NO --- Perfect!
Yes --- This mount is NOT compatible.
3 What is your wall made of?
CAUTION:
DO NOT install
into drywall alone Perfect!
Drywall with
wood studs? Solid concrete wall?
Perfect!
Yes --- Perfect!
No --- This mount is NOT compatible.
If this mount is NOT compatible, please contact
customerservice@mountingdream.com to find a compatible mount.
For parts shortage or damage, please contact us directly by customerservice@mountingdream.com.
New delivery will be timely arranged to replace missed or defective parts.
Attention:
Installation tools:
Bubble level Stud finder
Band tape
2m
2M2M
Pencil Screwdriver
ElectrodrillHammer
3/8"
Masonry Drill Bit
5/32"
Wood Drill Bit
Socket wrench
1/2"(13mm)
Gifts：
Velcro cable tie
2pcs
Bubble level
1pc
Part list：
-Wall plate
1pc
-Bracket
2pcs
①
Wall mounting hardware：
-Lag bolt
4pcs
-3mm Allen key
1pc
g--M6X35 bolt
4 pcs
f--M5X30 bolt
4 pcs
e--M4X30 bolt
4 pcs
h--M8X50 bolt
4 pcs
c--M6X12 bolt
4 pcs
b--M5X12 bolt
4 pcs
a--M4X12 bolt
4 pcs
d--M8X25 bolt
4 pcs
k--M5/M4
washer 4pcs
i--M5/M6 spacer
4pcs
l--M6 washer
4pcs
j--M8 spacer
4pcs
m--10mm spacer
4pcs
n--2.5mm spacer
8pcs
TV mounting hardware：
②
Contact us at telephone (626) 604-9048 (USA)
Mon - Fri 10am - 6pm (Pacific time) or email us by
customerservice@mountingdream.com to have
these additional pieces shipped directly to you.
Concrete Wall Anchor
4pcs
Concrete wall anchor (NOT INCLUDED)
drywall with
wood stud
The wall plate fits for single stud, 8” wood stud spacing, please choose corresponding holes in the wall plate for installation.
Step 1 Wall plate installation:
Option 1 Wall plate installation in wood stud
To avoid potential body injury or property damage:
1. Wall mount must be installed into wood stud's center, not drywall alone.
2. Drywall covering the wood stud must not exceed 16 mm (5/8 in.).
3. Minimum wood stud size: common 2 x 4 in(51 x 102 mm). Nominal 1 1/2 x 3 1/2 in(38 x 89mm)
4. The wall must be capable of supporting five times the weight of TV plus mount.
5. Make sure the logo on wall plate is upward as picture shows.
6. All lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Failure to follow this instruction will possibly lead to TV falling off from wall, and would possibly
cause body injuries or property loss.
⑤
④③
CAUTION
<16 mm(5/8 in.)
Locate the stud
with stud finder. Make
marks at the edges
of stud.
Mark centerlines
of stud.
②①
Then place wall plate along the centerlines and
use pencil to mark 2 hole locations on the wall.
UP
Make sure the logo on wall plate is upward
5/32"
Use 5/32" diameter drill bit to drill 2 pilot holes
at marked positions to a depth of 2.36".
Put 2 lag bolts into the drilled holes, and tighten each bolt by
using a socket wrench to mount the wall plate securely.Before
totally tightening the lag bolt please attach the bubble level on
the wall plate to check whether it is level.
③
To avoid potential personal injury or property damage:
1. Make sure the logo on the wall plate is upward as the picture shows.
2. Solid concrete wall's thickness should be more than 100mm/4", and the wall must be
capable of supporting five times the weight of the TV plus the mount.
3. All anchors/lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate.
Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Concrete wall
Option 2 Wall plate installation on concrete wall
①
②
③
CAUTION
Make sure the logo on wall plate is upward
UP
3/8"
Use 3/8" diameter drill bit to drill 4 holes
at marked positions to a depth of 2.36".
Level the wall plate and use wall plate as a template and pencil
to mark 4 hole locations on your desired height of the wall.
Put 4 Concrete Wall Anchors (not included in the package)
into drilled holes, and tap each anchor flush with the wall by
using a hammer. Then put 4 lag bolts into the anchors,
and tighten each bolt by using a socket wrench to mount the
wall plate securely. Before totally tightening the lag bolt please
attach the bubble level on the wall plate to check whether it is
level.
④
1
Select TV hardware (diameter / length / combination)
Bolt diameter: hand thread bolts into threaded inserts on the back of
TV to determine correct bolt diameter (M4, M5, M6, M8).
Too Short
Bolt length: verify adequate thread engagement with bolts or
bolts/spacers combination. We recommend thread engagement
by at least 5 turns.
- Too short will not hold the TV.
- Too long will damage the TV.
Too Long Correct
2
Add distance to wall Irregular back Inset holes Cables
Bolt and spacer combination: spacers sometimes are needed to
combine with bolts for several situations.
+
(For detail bolts and spacers combination, please refer to Page 7)
3
TV back TV back
TV back
TV back
Carefully lay your TV on a non-abrasive surface, or lay it with a padding underneath
it so as not to damage the screen.
Step 2
⑤
Step 3 Attach brackets to the back of the TV:
① For the TV with flat back, mount the brackets with bolt/washer/spacer
combination.
Tips:
Make sure the ends of TV
brackets with round
holes are facing upward.
Round hole is for upper
VESA hole, and long slot
hole for lower VESA hole.
Please try best to locate
brackets symmetrically (top
& bottom) at the back of TV
to avoid brackets stick out.
Attention: Screw in bolts a
bit, then pull upward
brackets to reduce the gap
between bolts and bolt
holes to make two brackets
parallel. Then fasten bolts.
Carefully lay TV on a non-abrasive surface, or with a padding underneath it so as not to
damage the screen.
⑥
Bolt/spacer/washer combination options (only for reference)
Tips:You have to remove the inner
circle of 2.5mm washer (n) in order
to fit the M8 (d) bolt.
② For TV with irregular back, mount the brackets with bolt/washer/spacer
combination.
(Spacers are highly recommended to be added, thus enlarge the space
between TV and brackets for better functionality.)
Carefully lay TV on a non-abrasive surface, or with a padding underneath it so as not to
damage the screen.
Tips:
Make sure the ends of TV
brackets with round
holes are facing upward.
Round hole is for upper
VESA hole, and long slot
hole for lower VESA hole.
Please try best to locate
brackets symmetrically (top
& bottom) at the back of TV
to avoid brackets stick out.
Attention: Screw in bolts a
bit, then pull upward
brackets to reduce the gap
between bolts and bolt
holes to make two brackets
parallel. Then fasten bolts.
⑦
Bolt/spacer/washer combination options (only for reference)
f
k
options
spacer
j
m
h
options
spacer
j
n
n
Tips: You have to remove the inner circle of 2.5mm washer (n) in order to fit the M6 (g)
or M8 (h) bolt.
Inhaltsverzeichnis
Andere Mounting Dream TV-Halterung Handbücher
Mounting Dream
Mounting Dream MD2413-S Bedienungsanleitung
Mounting Dream
Mounting Dream MD2361-32 Bedienungsanleitung
Mounting Dream
Mounting Dream HM2296-2 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2268 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2296-24 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2361-K Bedienungsanleitung
Mounting Dream
Mounting Dream MD2361-K-03 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2462 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2210 Bedienungsanleitung
Mounting Dream
Mounting Dream HM2377 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2868-LK Bedienungsanleitung
Mounting Dream
Mounting Dream MD2463-L Bedienungsanleitung
Mounting Dream
Mounting Dream MD2393-MX Bedienungsanleitung
Mounting Dream
Mounting Dream MD2462 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2165-LK Programmierhandbuch
Mounting Dream
Mounting Dream MD2377-02 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2463-L Bedienungsanleitung
Mounting Dream
Mounting Dream MD2411-S Bedienungsanleitung
Mounting Dream
Mounting Dream MD2868-M-03 Bedienungsanleitung
Mounting Dream
Mounting Dream MD2380-24K Bedienungsanleitung
