Moxa Technologies C104P Bedienungsanleitung

C104P User’s Manual

Universal 4 Port Serial Board

May 1999 (7th Edition)

The content of this manual is also available in CD-ROM and at Moxa Web Site.

Moxa Technologies Co., Ltd.

Tel: +866-2-8665-6373

Fax: +886-2-8665-6372

www.moxa.com

[email protected]

C104P User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of the agreements.

Reproduction in any form without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Technologies Co., Ltd.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on

the part of Moxa.

Moxa provides this document “as is”, without warranty of any kind, either expressed or implied,

including, but not limited to, the particular purpose. Moxa may make improvements and/or changes in

this manual or in the product(s) and/or the program(s) described in this manual at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa

Technologies assumes no responsibility for its use, or for any infringements of rights of the fourth parties

which may result from its use.

This product could include technical or typographical errors. Changes are periodically made to the

information herein; these changes may be incorporated in new editions of the publication.

MOXAInternetServices

Customer’s satisfaction is always our number one concern. To ensure that customers get the full benefit

of our services, Moxa Internet Services have been built for technical support, product inquiry, new driver

update, user’s manual update, etc.

The followings are the services we provide.

E-mail for technical support

address:[email protected]

FTP site for free driver update

address: ftp.moxa.com

ftp.moxa.com.tw

user ID: ftp

password: your_email_address

World Wide Web (WWW) Site for product info

address: www.moxa.com

www.moxa.com.tw

AboutThisManual

This manual is composed of six Chapters and one Appendix. This manual is written for installer, system

administrator and software programmer.

If you are a first-time installer and system administrator, we recommend you to go through the whole

manual except Chapter 4.

If you are a software programmer, you may refer to Chapter 4 “Serial Programming Tools”.

If you need cable wiring information, please see Chapter “Connection Cable and Cable Wiring”.

If you encounter any problem during installation, please refer to Chapter “Troubleshooting”.

Chapter 1 Introduction

Overview and features of the C104P board, list of items and overall installation guide.

Chapter 2 Hardware Installation

Hardware installation for the C104P board and connection cable.

Chapter 3 Software Installation

This Chapter details the software installation, configuration, driver loading/unloading, driver

upgrade and removal for various operating systems: Windows NT, Windows 95/98, DOS and

Windows 3.x.

Chapter 4 Serial Programming Tools

This Chapter roughly describes the programming tools for various O.S. platforms, including PComm

under Windows NT, Windows 95/98, API-232 under DOS and Windows 3.x.

Chapter 5 Connection Cable and Cable Wiring

This Chapter describes the RS-232 cable wiring for the connection cable.

Chapter 6 Troubleshooting

This Chapter describes the problems and possible answers for C104P board.

Appendix Technical Reference

Specification details, I/O port address map, and DB37 pinouts are described.

TableofContents

Introduction..................................................................... 1-1

Overview................................................................................................................1-1

Features.................................................................................................................1-4

Check List..............................................................................................................1-5

Installation Guide...................................................................................................1-6

Hardware Installation ...................................................... 2-1

Default Settings .....................................................................................................2-1

Quick Hardware Installation...................................................................................2-2

How to Do Quick Hardware Installation..........................................................................2-2

Hardware Installation with IO-IRQ Utility................................................................ 2-3

IO-IRQ Utility and Hardware Configuration....................................................................2-4

Software Installation ....................................................... 3-1

Windows NT ..........................................................................................................3-1

Installing Driver.............................................................................................................3-2

Configuring Board and Port........................................................................................... 3-7

Updating Driver.............................................................................................................3-9

Removing Driver ...........................................................................................................3-9

Windows 95/98......................................................................................................3-9

Installing Driver........................................................................................................... 3-10

Configuring Board and Port......................................................................................... 3-14

Updating Driver........................................................................................................... 3-15

Removing Driver ......................................................................................................... 3-16

DOS.....................................................................................................................3-17

Installing Driver........................................................................................................... 3-17

Driver Setup................................................................................................................ 3-18

Loading Driver................................................................ ............................................. 3-22

Unloading Driver..........................................................................................................3-23

Windows 3.x ........................................................................................................3-23

Installing Driver........................................................................................................... 3-24

Configuring Driver.......................................................................................................3-26

Removing Driver ......................................................................................................... 3-27

Serial Programming Tools................................................ 4-1

Windows NT and Windows 95/98..........................................................................4-1

Installation..................................................................................................................... 4-1

PComm Programming Library .......................................................................................... 4-2

Utilities.......................................................................................................................... 4-2

DOS.......................................................................................................................4-6

Installation..................................................................................................................... 4-6

DOS API-232 Library.....................................................................................................4-6

Utilities.......................................................................................................................... 4-6

Windows 3.x ..........................................................................................................4-8

Windows COMM API Library (Win16)............................................................................4-8

Utility............................................................................................................................. 4-9

Existing Applications......................................................................................................4-9

Connection Cable and Cable Wiring ..................................... 5-1

RS-232 Cable Wiring............................................................................................. 5-1

Troubleshooting............................................................... 6-1

General Troubleshooting.......................................................................................6-1

Windows NT ..........................................................................................................6-4

Windows 95/98......................................................................................................6-5

DOS.......................................................................................................................6-6

Technical Reference........................................................A-1

Specifications.........................................................................................................A-1

PC I/O Port Address Map.......................................................................................A-3

DB37 Connector Pinouts .......................................................................................A-4

C104P User’s Manual 1-1

1 Introduction

Overview

The Standard Multiport Async Solutions

The term Smartio stands for smart multiport serial I/O solution. The Smartio C104

Series multiport boards offer 4 serial ports for connecting terminals, modems,

printers, data acquisition equipment and any other serial devices to the PC/AT and

its compatible systems.

The C104P is equipped with custom-designed ASIC chip which replaces lots of

conventional ICs and reduces the board to half-size. The whole family supports 16

bit architecture. Full range of I/O addresses and IRQs are available. In addition,

with on-board EEPROM for storing the configuration data, the family is designed

without jumper or switch. These features make each port on the board truly

independent to any other port and thus compatible with most existing multiport

boards.

The C104P board is also available in PCI bus. Please contact MOXA

dealer/distributor or MOXA Web site for more details.

1-2 C104P User’s Manual

Hardware Configuration Method

C104P

JP1

Traditional

Multipoort Board

Jumper

1 2

3 4

Switch

.........

New : set I/O address Traditional : set switch and

and IRQ via software and jumper manually for

Utility. I/O address and IRQ.

Instead of using traditional jumper or switch for IRQ and I/O address settings,

hardware configuration of each port is easily set by DOS utility, Io-irq.exe, which

read and write the on-board EEPROM for configuration information through the

CAP (Configuration Access Port) address. The CAP address is the only channel

via which the configuration utility Io-irq.exe can access the board, which is identical

to the first port's base I/O address.

The only jumper, JP1, is designed in case that users forget the CAP address.

Normally JP1 is left open. When JP1 is short, the CAP address is forced to a fixed

I/O address, 0xA700. However, to adopt quick installation (described later), it is a

must to keep JP1 always short.

Quick Installation

To ease the hardware configuration, users who install only one C104P board under

Windows NT/95/98 are recommended to adopt quick installation described in

Chapter 2.

Because the series is so flexible in hardware configuration that they are compatible

virtually with all kinds of other manufacturer's multiport boards using 16450 or

16550 UART.

Introduction

C104P User’s Manual 1-3

Operating System Support

The C104P is operational under most popular operating systems such as Windows

NT, Windows 95/98, SCO UNIX/XENIX/OpenServer, DOS, Windows 3.x, OS/2,

Linux, QNX, FreeBSD, etc. However, MOXA device drivers for Windows NT,

Windows 95/98, Linux, DOS and Windows 3.x are provided for easier installation,

configuration and better performance. In this manual, chapters for MOXA

Windows NT,Windows 95/98,DOS and Windows 3.x device drivers are included.

For other compatible systems not mentioned, please refer to the respective operating

system’s manual for how to install and configure the standard driver.

MOXA Serial Comm Tool

For easy application development, MOXA provides an easy-use serial

communication library under Windows NT/95/98 (PComm) and Windows 3.x/DOS

(API-232). Users can use this library to develop your own applications using

Microsoft C, Turbo C, Assembly, QuickBASIC, Turbo Pascal, Clipper, Visual Basic,

Visual C++, Borland Delphi, etc. Utilities, such as diagnostic and monitor, are

included for diagnosing the board/port or monitoring the communication status.

Wide Applications

The C104P Series are suitable for many applications. Here are a few:

lInternet/Intranet Connection

lRemote Access Application

lMulti-user Application

lIndustrial Automation

lOffice Automation

lTelecommunication

lPC-based (vending) Machine or Kiosk System

lPoint-of-Sale (POS) System

1-4 C104P User’s Manual

Features

vCustom-designed ASIC, compact board size (half-size)

vNo switch no jumper, easily configured by software

vIndependent I/O address, IRQ setting for each of 4 serial ports

v16 bit AT bus architecture, more IRQs supported

vPComm serial communication tool

vSupport popular OS¡ÐWindows NT, Windows 95/98, DOS, Windows 3.x,

Linux

vCompatible with many other OS¡ÐQNX, SCO UNIX/OpenServer, SCO

XENIX, Free BSD, OS/2

C104P

Windows NT 3

Windows 95/98 3

DOS 3

Windows 3.x 3

Linux R

QNX C

SCO UNIX/OpenServer C

SCO XENIX C

FreeBSD C

OS/2 C

3: Driver supported by Moxa and shipped with product

R : Driver supported by Moxa but sent by request

C : Driver supported by OS

Note: MOXA FTP site is available for driver download

Andere Handbücher für C104P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Computerhardware Handbücher

Moxa Technologies

Moxa Technologies MAR-2000 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-661 Bedienungsanleitung

Moxa Technologies

Moxa Technologies W315A Bedienungsanleitung

Moxa Technologies

Moxa Technologies CP-102N-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies RKP-A110 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CA-132/132I Bedienungsanleitung

Moxa Technologies

Moxa Technologies Industrial Serial Board CI-132 Bedienungsanleitung

Moxa Technologies

Moxa Technologies Moxa Smartio C168H Bedienungsanleitung

Moxa Technologies

Moxa Technologies CI-104J Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2201 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies Industio C114HI Bedienungsanleitung

Moxa Technologies

Moxa Technologies Industio C114HI Bedienungsanleitung

Moxa Technologies

Moxa Technologies CCG-1500 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ABC-02-USB Bedienungsanleitung

Moxa Technologies

Moxa Technologies MPC-2101 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Industio CI-132 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 66-2MP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies THINKCORE W311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies CP-102U/UL Bedienungsanleitung

Moxa Technologies

Moxa Technologies Smartio CP-104UL Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8410 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies CP-602U-I-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies C104P Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung