Moxa Technologies UC-8112-ME-T Series Bedienungsanleitung

P/N: 1802081120010

*1802081120010*

UC-8112-ME-T

Quick Installation Guide

Edition 1.0, June 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The UC-8112-ME-T computing platform is designed for embedded data

acquisition applications. The UC-8112-ME-T computer comes with one or

two RS-232/422/485 serial ports and dual 10/100 Mbps Ethernet LAN

ports, as well as a Mini PCIe socket to support cellular modules. These

versatile communication capabilities let users efficiently adapt the

UC-8112-ME-T to a variety of complex communications solutions.

Package Checklist

Before installing the UC-8112-ME-T, verify that the package contains the

following items:

•UC-8112-ME-T embedded computer (with SD card)

•Power jack

•3-pin terminal block for power

•5-pin terminal block for UART x 2

•Quick installation guide (printed)

•Warranty card

IMPORTANT: Notify your sales representative if any of the above items

are missing or damaged.

UC-8112-ME-T Panel Layout

The following figures show the panel layouts of the UC-8112-ME-T.

Top Panel View

- 3 -

Bottom Panel View

Front Panel View

LED Indicators

LED Name

Color

Function

USB Green

Steady On

USB device is connected and

working normally.

Off

USB device is not connected.

SD Green

Steady On

SD Card inserted and working

normally.

Off

SD card is not detected.

Power Green Power is on and the computer is working

normally.

Off

Power is off.

LAN1/

LAN 2

(RJ45

connector)

Green

Steady On

100 Mbps Ethernet link

Blinking

Data transmission in progress

Yellow

Steady On

10 Mbps Ethernet link

Blinking

Data transmission in progress

Off

Ethernet is not connected.

- 4 -

Wireless

Signal

Strength

Green

Yellow

Red

The number of glowing LEDs indicates the

signal strength.

3 (Green + Yellow + Red): Excellent

2 (Yellow + Red): Good

1 (Red): Poor

Off

Wireless module is not detected.

Programm

able

diagnostic

LEDs

Green

Yellow

Red

These three LEDs are programmable. For

details, refer to the “

Default Programmable

Button Operation" section in the Hardware

User’s Manual.

Installing the UC-8112-ME-T

Two sliders are provided at the back of the unit for DIN-rail mounting or

wall mounting.

DIN-Rail Mounting

1. Attach the DIN-rail mounting kit on the rear panel of the

UC-8112-ME-T as shown in the following illustration. Make sure

that the two screws are securely fastened.

2. Pull down the bottom slider of the DIN-rail bracket located at

the back of the unit

3. Insert the top of the DIN rail into the slot just below the upper

hook of the DIN-rail bracket.

4. Latch the unit firmly on to the DIN rail as shown in the

illustrations below.

5. Push the slider back into place.

- 5 -

Connector Description

Power Connector

Connect the power jack (in the package) to the UC-8112-ME-T’s DC

terminal block (located on the top panel), and then connect the power

adapter. It takes about 30 seconds for the system to boot up. Once the

system is ready, the Power LED will light up.

Grounding the UC-8112-ME-T

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI).

SG:

The Shielded Ground (sometimes called

Protected Ground) contact is the

top

contact of

the 3

pin power terminal block connector when

viewed from the angle shown here. Connect the

SG wire to an appropriate grounded metal

surface.

Ethernet Ports

The two 10/100 Mbps Ethernet ports (LAN 1 and LAN 2) use RJ45

connectors.

Signal

ETx+

ETx-

ERx+

ERx-

Serial Ports

The two serial ports (P1 and P2) use terminal connectors. Each port can

be configured by software for RS-232, RS-422, or RS-485. The pin

assignments for the ports are shown in the following table:

RS-232

RS-422

RS-485

TXD

TXD+

–

RXD

TXD-

–

RTS

RXD+

D+

CTS

RXD-

D-

GND

SD/SIM Card Sockets

The UC-8112-ME-T comes with an SD socket for storage expansion, and

a SIM card socket for cellular communication. The SD card/SIM card

sockets are located at the lower part on the front panel. To install the

cards, remove the screw and the protection cover to access the sockets,

and then insert the SD card or the SIM card into the sockets directly. You

will hear a click when the cards are in place. To remove the cards, push

the cards in before releasing them.

- 6 -

Console Port

The console port is an RS-232 port that can be connected to with a 4-pin

pin header cable. You can use this port for debugging or firmware

upgrade. Note that the cable is not included in the package.

Signal

TxD

RxD

GND

USB

The USB 2.0 port is located at the lower part of the front panel and

supports a USB storage device driver. By default, the USB storage is

mounted at /mnt/usbstorage.

Real-Time Clock

The real-time clock in the UC-8112-ME is powered by a lithium battery.

We strongly recommend that you do not replace the lithium battery

without the help of a Moxa support engineer. If you need to change the

battery, contact the Moxa RMA service team.

ATTENTION

There is

a risk of explosion if the battery is replaced with an

incorrect type of battery.

Cellular Module

The UC-8112-ME-T comes with a built-in PCIe socket for wireless

communication. To install a cellular module, do the following:

1. Remove the two screws on the

DIN-rail mounting bracket and

detach the bracket from the unit.

2. Remove the two screws on

the rear panel.

- 7 -

3. Remove the four screws on the

silver cover on the right panel

and

remove the cover.

4. Remove the screw on the

metal cover.

5. Remove the three screws on

the top panel.

6. Remove the two screws on

the bottom panel.

7. Check the contents of the cellular module package. The package

should contain the items shown below:

- 8 -

8. Remove the metal cover of the computer and locate the cellular

module socket.

9. Remove the screw next to the socket and replace it with the bronze

screw (in the package) as shown below:

10. Attach one thermal pad to the cellular module cover and the other

thermal pad to the module pad.

- 9 -

11. Attach the cellular module to the module pad.

12. Mount the module cover on the cellular module and use screws on

both sides to secure the cover.

13. Insert the module into the socket and secure it using a screw from the

package.

- 10 -

14. Connect antenna cables to the cellular module. There are three

antenna connectors on the cellular module: W1 and W3 are for

cellular antennas and W2 is for GPS antenna.

15. Insert the antenna connectors through the antenna cable holes on

the front panel of the cover as shown below:

16. Secure the antenna connectors to the cover using a locking washer

and nut as shown below:

Inhaltsverzeichnis

Andere Moxa Technologies Desktop Handbücher

Moxa Technologies

Moxa Technologies V2406 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2101 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7408 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7408 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8112-ME-T-LX Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V2416 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2401 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-3201 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies BXP-C100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7112 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-820 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2403 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406C Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies MC-1100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-5157-AC/DC Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-710 Series. DA-710-XPE Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7400 Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2416A-C7 Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2406A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-681 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung