Moxa Technologies UC-8200 Series Bedienungsanleitung

P/N: 1802082000010

*1802082000010*

UC-8200 Series

Quick Installation Guide

Version 1.0, July 2019

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The UC-8200 Series computing platform is designed for embedded data

acquisition applications. The UC-8200 Series computer comes with two

RS-232/422/485 serial ports and dual 10/100/1000 Mbps Ethernet LAN

ports, as well as two Mini PCIe sockets to support cellular and Wi-Fi

modules. These versatile communication capabilities let users efficiently

adapt the UC-8200 Series to a variety of complex communications

solutions.

Package Checklist

Before installing the UC-8200 Series, verify that the package contains

the following items:

•UC-8200 Series embedded computer

•Power jack

•Console cable

•DIN-rail mounting kit

•Quick installation guide (printed)

•Warranty card

IMPORTANT!

Notify your sales representative if any of the above items are

missing or damaged.

UC-8200 Series Panel Layout

The following figures show the panel layouts of the UC-8200 Series:

UC-8210 Series

Top Panel View

- 3 -

Bottom Panel View

Front Panel View

- 4 -

UC-8220 Series

Top Panel View

Bottom Panel View

- 5 -

Front Panel View

LED Indicator

LED Name

Status

Function

PWR1/PWR2

Green

Power is on

Off

No power

SIM

Green

SIM2 in use

Yellow

SIM1 in use

USR

Green/Yellow

User programmable

L1/L2/L3 Yellow

Cellular signal strength

L1+L2+L3: Strong

L2+L3: Normal

L3:Weak

W1/W2/W3

Yellow

WLAN signal strength

L1+L2+L3: strong

L2+L3: normal

L3: weak

LAN1/LAN 2

(RJ45 connector)

Green

Steady on

1000 Mbps Ethernet link

Blinking

Data is being transmitted

Yellow

Steady on

100 Mbps Ethernet link

Blinking

Data is being transmitted

Off

No Ethernet connection

Installing the UC-8200 Series

DIN-rail Mounting

The aluminum DIN-rail attachment plate is already attached to the

product’s casing. To mount the UC-8200 Series on to a DIN rail, make

sure that the stiff metal spring is facing upwards and follow these

steps.

- 6 -

1. Pull down the bottom slider

of the DIN-rail bracket

located at the back of the

unit

2. Insert the top of the DIN

rail into the slot just below

the upper hook of the DIN-

rail bracket.

3. Latch the unit firmly on to

the DIN rail as shown in the

illustrations below.

4. Push the slider back into

place.

UC-8210

UC-8220

Wall Mounting (optional)

The UC-8200 Series can be mounted on to a wall using a wall-mounting

kit. The optional wall-mounting kit should be purchased separately.

Follow these steps to mount the computer on to a wall:

Step 1

Use four screws to fasten the

wall-mounting brackets on the

left panel of the computer.

Step 2

Use another four screws to

mount the computer on to a wall

or in a cabinet.

IMPORTANT!

The diameter of the screw heads should be

greater than 7 mm

and less than 14 mm; the diameter of the shafts should be less

than 3 mm. The length of the screws should be greater than 6

mm.

- 7 -

NOTE

•Test the screw head and shank size by inserting the screws

into one of the keyhole shaped apertures of the wall-

mounting plates before attaching the plate to the wall.

•

Do not drive the screws in all the way—leave a space of

about 2 mm to allow room for sliding the wall mount panel

between the wall and the screws.

Connector Description

Power Connector

Connect the power jack (in the package)

to the UC-8200 Series’ DC terminal

block (located on the top panel), and

then connect the power adapter. It takes

about 30 seconds for the system to boot

up. Once the system is ready, the Power

LED will light up. Both models support

dual power inputs for redundancy.

WARNING

•

This product is intended to be supplied by a UL Listed

Power Adapter or DC power source marked ‘L.P.S.” (or

“Limited Power Source”) rated 12-48 VDC, 0.25 A

(minimum), and Tma= 85°C (minimum).

•

The power adapter should be connected to a socket outlet

with earthing connection.

If you need further information or assistance, contact a Moxa

representative.

Grounding the UC-8200 Series

There is a grounding connector located on the top panel of the

computer. Grounding and wire routing help limit the effects of noise

due to electromagnetic interference (EMI). Connect to an appropriate

grounded metal surface.

Ethernet Ports

The two 10/100/1000 Mbps Ethernet ports (LAN 1 and LAN 2) use RJ45

connectors.

10/100 Mbps

1000 Mbps

Tx+

TRD(0)+

Tx-

TRD(0)-

Rx+

TRD(1)+

–

TRD(2)+

–

TRD(2)-

Rx-

TRD(1)-

–

TRD(3)+

–

TRD(3)-

Serial Ports

The two serial ports (P1 and P2) use DB9 interface. Each port can be

configured by software for RS-232, RS-422, or RS-485. The pin

assignments for the ports are shown in the following table:

- 8 -

Pin RS-232

RS-422/

RS-485

–

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

microSD Card Sockets

The UC-8200 Series comes with a micro SD socket for storage

expansion. The microSD socket is located at the lower part on the front

panel. To install the card, remove the screw and the protection cover to

access the socket, and then insert the microSD card into the socket

directly. You will hear a click when the card is in place. To remove the

card, push the card in before releasing it.

Console Port

The console port is an RS-232 port located on the top panel, and can be

connected to a 4-pin pin header cable. You can use this port for

debugging or firmware upgrade.

Signal

TxD

RxD

GND

USB Port

The USB 2.0 port is located at the lower part of the front panel and

supports a USB storage device driver. By default, the USB storage is

mounted at /mnt/usbstorage.

CAN Port

A CAN port with a DB9 interface is located on the bottom panel. Refer

to the figure below for detailed pin definitions.

- 9 -

Pin Definition

–

CAN_L

CAN_GND

–

(CAN_SHLD)

(GND)

CAN_H

–

(CAN_V+)

Digital Inputs/Outputs

There are four digital inputs and four

digital outputs on the top panel.

Refer to the figure on the left for

detailed pin definitions.

SIM Card Socket

The UC-8220 computer comes with a SIM card socket that allows users

to install two SIM card for the cellular communication.

Step 1

Remove the screw on the SIM

card holder cover located on the

bottom panel of the UC-8220

computer.

Step 2

Insert the SIM card into the

socket. Make sure you insert in

the right direction. To remove

the SIM card, press the SIM

card in to release and then you

can pull out the SIM card.

Real-time Clock

The real-time clock in the UC-8200 Series is powered by a lithium

battery. We strongly recommend that you do not replace the lithium

battery without the help of a Moxa support engineer. If you need to

change the battery, contact the Moxa RMA service team.

ATTENTION

There is

a risk of explosion if the battery is replaced with an

incorrect type of battery.

- 10 -

Accessing the UC-8200 Series Using a PC

You can use a PC to access the UC-8200 Series by one of the following

methods:

A. Through the serial console port with the following settings:

Baudrate=115200 bps, Parity=None, Data bits=8, Stop bits

=1, Flow Control=None

ATTENTION

Remember to choose the

“VT100” terminal type. Use the

console cab

le to connect a PC to the UC-8200 Series's serial

console port.

B. Using SSH over the network. Refer to the following IP addresses

and login information:

Default IP Address

Netmask

LAN 1

192.168.3.127

255.255.255.0

LAN 2

192.168.4.127

255.255.255.0

Password: moxa

Installing the Cellular Module

The UC-8220 Series comes with two PCIe sockets, allowing users to

install a cellular and a Wi-Fi module. Some models have been shipped

with a built-in cellular module inside the computer. However, if you

purchase the UC-8200 series without a cellular module, follow these

steps to install the cellular module.

Remove the four screws

on the side panel of the

computer.

Remove two screws on the

other side panel to open the

side cover of the computer.

3. The socket is located on the main board of the computer.

Andere Handbücher für UC-8200 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Desktop Handbücher

Moxa Technologies

Moxa Technologies THINKCORE W311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ThinkCore V481 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-8100-ME-T Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-682A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-820C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-7270-MP-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-662A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-683 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-661 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies EM-1240-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2616 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681-I-SP-XPE Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7400 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-7270-MP-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2416 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7410-LX Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-5150-AC Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2616 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MPC-2120 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies BXP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-3201 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V2403C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MPC-2070 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung