Moxa Technologies V460 Series Bedienungsanleitung

V460 Series Hardware User’s Manual

First Edition, March 2008

www.moxa.com/product

Moxa Inc.

Tel: +886-2-2910-1230

Fax:+886-2-2910-1231

Web: www.moxa.com

Moxa Technical Support

Worldwide: support@moxa.com

The Americas:support@usa.moxa.com

V460 Series Hardware User’s Manual

Any software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no

responsibility for its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the

publication.

Table of Contents

Chapter 1 Introduction..................................................................................................1-1

Overview.................................................................................................................................. 1-2

Package Checklist.................................................................................................................... 1-2

Product Features ...................................................................................................................... 1-3

Product Hardware Specifications............................................................................................. 1-4

Hardware Block Diagrams....................................................................................................... 1-6

Chapter 2 Hardware Introduction.................................................................................2-1

Appearance .............................................................................................................................. 2-2

Dimensions (unit = mm)..........................................................................................................2-5

LED Indicators......................................................................................................................... 2-5

Power On/Off Button............................................................................................................... 2-6

Reset Button............................................................................................................................. 2-6

Real Time Clock ...................................................................................................................... 2-6

Placement Options................................................................................................................... 2-7

Wall or Cabinet .......................................................................................................... 2-7

DIN-Rail Mounting.................................................................................................... 2-7

Chapter 3 Hardware Connection Description .............................................................3-1

Wiring Requirements............................................................................................................... 3-2

Connecting the Power ................................................................................................ 3-2

Grounding the Unit..................................................................................................... 3-3

Connecting to a Display........................................................................................................... 3-3

Connecting to a Keyboard and Mouse..................................................................................... 3-4

Connecting to the Network...................................................................................................... 3-4

Connecting to a Serial Device.................................................................................................. 3-5

Connecting to the unmanaged switch ports (V466 only)......................................................... 3-6

PCMCIA (V462 only)..............................................................................................................3-6

Connecting to the DI/DO (V468 only)..................................................................................... 3-6

Digital Input Wiring................................................................................................... 3-7

Digital Output Wiring ................................................................................................ 3-7

Installing a Memory Module ................................................................................................... 3-7

Inserting a CompactFlash Card................................................................................................ 3-8

USB Hosts ............................................................................................................................... 3-9

Audio Interface...................................................................................................................... 3-10

Chapter 4 BIOS Setup ...................................................................................................4-1

Entering the BIOS Setup Utility .............................................................................................. 4-2

Modifying the BIOS Main Settings......................................................................................... 4-2

Basic Configuration.................................................................................................... 4-2

System Security.......................................................................................................... 4-3

Advanced Settings ................................................................................................................... 4-4

Removable Device/Hard Disk/Cd-ROM Boot Priority.............................................. 4-4

First / Second / Third Boot Device............................................................................. 4-4

Boot Other Device...................................................................................................... 4-4

Modifying Advanced BIOS Settings.......................................................................... 4-4

Advanced Chipset Settings......................................................................................... 4-6

PnP/PCI Configurations ............................................................................................. 4-8

Peripherals ............................................................................................................................... 4-9

Power......................................................................................................................................4-11

Hardware Monitor.................................................................................................................. 4-12

Load Defaults......................................................................................................................... 4-12

Exiting the BIOS Setup..........................................................................................................4-13

Upgrading the BIOS ..............................................................................................................4-15

Chapter 1 Introduction

Thank you for purchasing the Moxa V460 series x86-based industrial ready-to-run embedded

computer. This product’s features include RS-232/422/485 serial ports, dual or quad 10/100 Mbps

Ethernet ports, VGA output, a CompactFlash socket for mass storage expansion, PS/2 connector

for keyboard/mouse usage, four USB 2.0 ports that support system boot, mass storage disk

expansion, or other peripherals, 8 digital input channels and 8 digital output channels, and input

channels with 3 KV protection (V468), 8 10/100 Mbps unmanaged switch ports (V466), and

PCMCIA slot (V462). The V460 series is based on the AMD low power consumption solution,

which makes it suitable for various industrial and harsh applications such as SCADA, factory

automation, and applications that require an onsite display or monitor. The x86 architecture and

friendly Windows embedded platform provide an integrated powerful tool for handling data. The

V460 can be used as a field host and control center for on-site applications that transfer or relay

information.

This manual introduces the hardware of the V460 series embedded computers. After a brief

introduction of the hardware features, the manual focuses on installation and hardware

configuration with device interfaces.

In this chapter, we cover the following topics:

Overview

Package Checklist

Product Features

Product Hardware Specifications

Hardware Block Diagrams

V460 Series Hardware User’s Manual Introduction

1-2

Overview

The V460 series of x86 ready-to-run embedded computers is designed around the AMD LX800

and Geode chipset, which exhibits low power consumption and high reliability. In addition to the

usual computer peripherals, the V460 integrates dual or quad LAN ports, 4 USB 2.0 hosts, and 4

serial ports, making the V460 into an ideal industrial embedded computer for handling not only

communication tasks, but also applications that require advanced computing power. In addition,

all output and information can be displayed onscreen through the built-in VGA interface. The

V460 series offers a variety of I/O options for use in a variety of applications and vertical markets.

The on-board CompactFlash and DDR SDRAM provide ample storage capacity, and the

Windows-based operating system comes pre-installed and ready-to-run, providing a Windows-like

environment for easy software development. Software written for desktop PCs can be easily ported

to the V460 using a common complier, which means that programmers do not need to spend a lot

of time modifying existing software code. In addition, the operating system, device drivers, and

user-developed software can all be stored in the pre-installed CompactFlash memory Card to

enhance system reliability.

Package Checklist

V462-CE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Dual LANs, 4 Serial Ports,

CompactFlash, PCMCIA, USB, Audio, WinCE 6.0.

V464-CE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Quad LANs, 4 Serial Ports,

CompactFlash, USB, Audio, WinCE 6.0.

V466-CE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Quad LANs, 4 Serial Ports, 8

Unmanaged Switch Ports, CompactFlash, USB, Audio, WinCE 6.0.

V468-CE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Quad LANs, 4 Serial Ports,

8DI, 8DO, CompactFlash, USB, Audio, WinCE 6.0.

V462-XPE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Dual LANs, 4 Serial Ports,

CompactFlash, PCMCIA, USB, Audio, WinXP embedded.

V464-XPE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Quad LANs, 4 Serial Ports,

CompactFlash, USB, Audio, WinXP embedded.

V466-XPE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Quad LANs, 4 Serial Ports, 8

Unmanaged Switch Ports, CompactFlash, USB, Audio, WinXP embedded.

V468-XPE

x86 Ready-to-Run Embedded Computer with AMD LX 800, VGA, Quad LANs, 4 Serial Ports,

8DI, 8DO, CompactFlash, USB, Audio, WinXP embedded.

V460 Series Hardware User’s Manual Introduction

1-3

All models of the V462/464/466/468 series are shipped with the following items:

y1 V460 Series Embedded Computer

yQuick Installation Guide

yDocument & Software CD

yEthernet Cable: RJ45 to RJ45 cross-over cable, 100 cm

yPS2 to KB/MS Y type Cable

yDin-rail Kit

yProduct Warranty Statement

Optional Accessories

Switching Power Adaptor: 60W, 24 VDC output, 100 to 240 VAC input, power cord must be

ordered separately.

yPower Cords:

Power cord with Australia Plug

Power Cord with UK Plug

Power Cord with Euro Plug

Power Cord with US Straight Plug

NOTE: Notify your sales representative if any of the above items are missing or damaged.

Product Features

yAMD Geode LX [email protected] CPU, 500 MHz

yBuilt-in 256 MB DDR SDRAM (512MB for XPE version)

yBuilt-in 256 MB Industrial DOM to store OS (1GB for XPE version)

y512K battery backup SRAM

y2 RS-232 and 2 RS-232/422/485 serial ports

ySerial port 3 and port 4 support ANY BAUD RATE

y2 or 4 10/100 Mbps Ethernet ports for network redundancy

y8 unmanaged switch ports

y8 + 8 DI/DO with 3 KV isolation protection

yCompactFlash socket for storage expansion

y4 USB 2.0 hosts that support system boot up

yLED indicators for Power, Battery, Storage

yReady-to-run WinCE 6.0 or XP embedded platform

yDin-rail and Wall mount installation supported

yRobust, fanless design

V460 Series Hardware User’s Manual Introduction

1-4

Product Hardware Specifications

System

CPU AMD Geode LX [email protected] processor with 128K L2 Cache, 500

MHz

System Chipset AMD CS5536 chipset

FSB 400 MHz

Expansion Bus On-board PC/104-Plus

BIOS 4 mega-bit Flash BIOS, supporting Plug & Play, APM 1.2

System Memory 200-pin SO-DIMM socket x 1 with built-in 256 MB DDRSupport

DDR400 up to 1GB

SRAM 512K SRAM, battery backup

OS Windows CE 6.0, WindowsXP Embedded

Display

Graphics Controller CPU Integrated 2D graphics

Display Interface CRT Interface for VGA output

Network Communication

LAN V462: Auto-sensing 10/100 Mbps x 2, RJ45 connector

V464: Auto-sensing 10/100 Mbps x 4, RJ45 connector

V466: Auto-sensing 10/100 Mbps x 4, RJ45 connector

V468: Auto-sensing 10/100 Mbps x 4, RJ45 connector

LAN Controller Realtek RTL8100C

Protection Built-in 1.5KV magnetic isolation protection

Serial Communication

Serial Ports Ports 1 and 2: RS-232, DB9 male

Ports 3 4: RS-232/422/485, software-selectable, DB9 male

RS-232 signals: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422 signals: TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w signals: TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w signals: Data+, Data-, GND

Protection Built-in 15 KV ESD protection for all signals

Data bits 5, 6, 7, 8

Stop bits 1, 1.5, 2

Parity None, Even, Odd, Space, Mark

Flow Control RTS/CTS, XON/XOFF, RS-485 ADDC™

Speed 50 bps to 921.6 Kbps; ports 3 and 4 support ANY BUAD RATE

Connector Type D-Sub male 9-pin connector

Unmanaged Switch Communication (V466 only)

Switch Port Unmanaged 10/100 Mbps switch ports x 8

V460 Series Hardware User’s Manual Introduction

1-5

Digital Input (V468 only)

Input Channels 8, source type

Digital input levels Dry contact:

Logic level 0: Close to GND

Logic level 1: Open

Wet contact:

Logic level 0: +3V max

Logic level 1: +10 to +30V (COM to DI)

Protection 3 KV optical isolation protection

Connector Type 10-pin screw terminal block (8 points / COM / GND)

Digital Output (V468 only)

Output Channels 8, sink type

On-state Voltage 24 VDC nominal, open collector to 30 V

Output Current Rating Max. 200 mAper channel

Protection: 3 KV optical isolation protection

Connector Type 9-pin screw terminal block

Other Peripherals

USB USB 2.0 compliant hosts x 4, type A connector, supporting system

boot up

Audio AC97 audio, supporting speaker-out interface

KB/MS 1 PS/2 interface supporting standard PS/2 keyboard and PS/2 mouse

via Y-type cable

Watchdog Timer Supports 1 to 255 level time interval system reset, software

programmable

RTC Comes with battery backup

PCMCIA Cardbus card and 16-bit PCMCIA 2.1/ JEIDA 4.2 card (V462 only)

LEDs

System Power x 1, Ready x 1, Storage x 1

LAN V462: 10M/Link x 2 (on connector), 100M/Link x 2 (on connector)

V464: 10M/Link x 4 (on connector), 100M/Link x 4 (on connector)

V466: 10M/Link x 4 (on connector), 100M/Link x 4 (on connector)

V468: 10M/Link x 4 (on connector), 100M/Link x 4 (on connector)

Power Requirements

Power Input 9 to 36 VDC, 3-pin terminal block (V+, V-, SG)

Power Consumption 2820 mA @ 36V, 730 mA @ 9V

Physical Properties

Board Form Factor EPIC

Dimensions (WxDxH): 260 x 135 x 50 mm (without wall mount kit)

Weight 1.36 kg

Construction Material Aluminum

Mounting Options DIN-rail, wall mounting

V460 Series Hardware User’s Manual Introduction

1-6

Environmental Limits

Operating Temperature -10 to 60°C (14 to 140°F), 5 to 95% RH

-40 to 75°C (-40 to 167°F) is optional for -T models

Storage Temperature -20 to 80°C (-4 to 176°F), 5 to 95% RH

-40 to 85°C (-40 to 185°F) is optional for -T models

Regulatory Approvals

EMC FCC, CE (Class A)

Safety UL, cUL, LVD

Other RoHS, WEEE

Warranty 5 years

Hardware Block Diagrams

V462

AMD

CS5536

DDR

SDRAM VGA

USB

Host x 4

Function

Super

I/O

IDE

Audio

ISA Bridge

LAN1 LAN2

PCMCIA

MOXA

UART

ASIC

Battery

Backup

SRAM

RS-232

RS-232/422/485

AMD

LX800

CPU

RS-232

Serial

Port 1 Serial

Port 2

Serial

Port 3 Serial

Port 4

Andere Handbücher für V460 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Desktop Handbücher

Moxa Technologies

Moxa Technologies MPC-2120 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-680 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7402-LX Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies e V2416A-C2 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DRP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies V2406A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-8100-ME-T Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-2200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7410-LX Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-662A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies MC-4510-C23 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MPC-2070 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-7112 LX Plus Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-8112-ME-T-LX Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-8112-ME-T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-681A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V2403C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8580-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies DRP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ThinkCore V481 Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA261 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-7122 Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung