Moxa Technologies IoLogik E1500-T Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802015000010

ioLogik E1500 Series

Quick Installation Guide

First Edition, May 2012

1. Overview

Boasting a threaded M12 Ethernet port to ensure wired

connectivity, a spring-type terminal block for vibration-resistant

cabling, and a soundly convenient DIN rail mounting assembly ,

the ioLogik E1500 series is designed to easily withstand the severe

vibrations experienced on rolling stock and waysides. Carefully

engineered channel-to-channel isolation gives protection against

cross-line power surges and crosstalk, safeguarding stable data

communications. In addition, this remote I/O is compliant with EN

50121-3-2, EN 50121-4 and the essential sections of the EN 50155

standard (covering operating temperature, power input voltage,

electrical surges, ESD and vibration), all of which are fundamental

for any electronic equipment used on or around railway vehicles.

Model Selection:

ioLogik

DIO

Relay

RTD

E1510-T

–

E1512-T

–

Package Checklist

•1 ioLogik E1500 series remote I/O product

•Documentation and software CD

•Quick installation guide (printed)

2. Specifications

System

Ethernet: 10/100 Mbps, M12 connector

Protection: 1.5 KV magnetic isolation

Protocols: Modbus/TCP, TCP/IP, UDP, DHCP, Bootp,

HTTP

Power Input:

24 VDC nominal, 12 to 48 VDC

Wiring:

I/O cable max. 14 AWG

Dimensions:

144 x 124 x 30 mm (5.67 x 4.88 x 1.18 in)

Weight:

825 g

Operating

Temperature:

Standard Models: -40 to 85°C (-40 to

185°F)

Storage Temperature: -40 to 85°C (-40 to 185°F)

Ambient Relative

Humidity:

5 to 95% (non-condensing)

Standards and

Certifications:

UL 508, EN50155, EN50121-3-2,

EN50121-4 (pending)

Warranty Period:

5 years

Details:

See www.moxa.com/warranty

Digital Input

Sensor Type:

NPN, PNP, and Dry contact

I/O Mode:

DI or Event Counter

Dry Contact:

•On: short to GND

• Off: open

Wet Contact:

• On: 0 to 3 VDC

• Off: 10 to 30 VDC

Isolation:

3K VDC or 2K Vrms

Counter/Frequency:

250 Hz, power off storage

Digital Output

I/O Mode:

DO or Pulse Output

Pulse Wave

Width/Frequency:

1 ms/500 Hz

Over-voltage

Protection:

45 VDC

Over-current

Protection:

2.6 A (4 channels @650 mA)

Over-temperature

Shutdown:

175°C (typical), 150°C (min.)

Current Rating:

200 mA per channel

Isolation:

3K VDC or 2K Vrms

3. Installation

Power and Networking

Connect the +12 to +48 VDC power line to the ioLogik E1500’s

terminal block V+ terminal; connect the ground from the power

supply to the V- terminal. If an earth ground is available, then

connect the ground pin ( ).

Mounting and Cabling

The ioLogik E1500 can be used with both DIN rail and wall mounts.

When mounting on a rail, release the bottom mounting kit, install

the ioLogik on the rail, and then restore the bottom mounting kit to

fix the ioLogik to the rail. When using wall mounting, release both

the upper and bottom DIN rail kits.

The ioLogik E1500 has an M12 Ethernet port for connecting either

a standard direct- or crossover-Ethernet cable via a locking M12

connector.

LED Indicators

Type

Color

Description

PWR

Green

System power in ON

Off

System power is OFF

RDY

Green

System is ready

Green

Blinking

Located

Red System Booting-up Error

Green/Red

Blinking

Safe Mode

Red

Blinking

Firmware upgrade (LED flashes for 3

seconds then stays Red until restart )

Off System is not ready

LAN Green 100Mb

Amber 10Mb

Blinking Data Transmitting

Off Ethernet Off

EXP Green Expansion Mode Ready

Red Configuration Fail

Off Stand-alone Mode

DIO Green Channel ON

Red Diagnostic Error

Off

Channel OFF

4. I/O Wiring

Digital Input/Output (Sink Type)

5. System Configuration

Configuration via Web Console

Main configuration of an ioLogik E1500 is via its web console.

•Default IP Address: 192.168.127.254

•Subnet Mask: 255.255.255.0

Note: Be sure to configure the host PC’s IP address to the same

subnet as the ioLogik E1500. For example, 192.168.127.253

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

ioSearch Utility

ioSearch is a search utility that helps users locate an ioLogik E1500

on the local network. The utility can be found in the Document and

Software CD Software ioSearch; the latest version can be

downloaded from Moxa’s website.

Load Factory Default Settings

There are three ways to restore the ioLogik E1500 to the factory

default settings.

1. Hold the RESET button for 5 seconds.

2. Right click the specified ioLogik in the ioSearch utility and

select “Reset to Default.”

3. Select “Load Factory Default” from the web console.

Modbus Address Table

Please refer to the user’s manual for details of the ioLogik’s

Modbus address, or refer to the start address of the I/O channels in

web console User-defined Modbus Addressing Default

Address.

Active OPC Server Connection

Take the following steps to connect the ioLogik E1500 to an Active

OPC Server:

1. Disable the user-defined Modbus address function.

2. Install the Active OPC Server Lite Package from Document and

Software CD Software AOPC Lite ActiveOPCSetup 

Install.exe

3. Install from Web console Active OPC Server Settings 

AOPC & I/O Settings; specify the IP address where the Active

OPC Server is installed. Specify the I/O channels that need to

be added to Active OPC Server Lite. Submit the settings and

then Save/Restart.

4. From web console Active OPC Server Settings Create

AOPC Tag, click the “Create Tag” button.

5. Launch Active OPC Server Lite from Start Programs MOXA

IOServer ActiveOPC ActiveOPC. Save the configuration

before exiting the Active OPC Server Lite program.

Dieses Handbuch passt für folgende Modelle

Andere Moxa Technologies E/A-System Handbücher

Moxa Technologies

Moxa Technologies MC-7270-DC-CP-T Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik 2500 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2212 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik 2500 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-IRIGB-4DIO-PCI104-EMC4 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik R1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioThinx 4510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1261H Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2260 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1500 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik 2542 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2242 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioThinx 4510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E2242 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E4200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E4200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik 1300 Series Handbuch

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung

Moxa Technologies ioLogik E1500-T Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken