Moxa Technologies TC-6110 Series Bedienungsanleitung

P/N: 1802061100014

*1802061100014*

TC-6110 Series Train Computer

Quick Installation Guide

Edition 5.0, March 2016

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

TC-6110 train computers are specifically designed for onboard train

applications. They come with 2 Gigabit LAN ports, 1 RS-232 serial port, 3

USB 2.0 hosts, and 2 expansion slots, offering an ideal solution for any

auxiliary train application.

To guarantee high reliability and availability during train operations,

TC-6110 computers come with M12 connectors for Gigabit LAN ports,

USB ports, and dual power inputs. In addition, the expansion modules

offer high flexibility for system integration. Users can easily expand the

system with additional storage modules for greater storage capacity.

Model Names and Package Checklist

The TC-6110 Series includes the following models:

•TC-6110-W7E: Modular 3U/42HP train computer, Intel Atom D525

1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power, WLAN

module (available on request), Win7 Embedded (32-bit) , -25 to 55°C

operating temperature range, compliant with EN 50155 Class T1

•TC-6110-T-W7E: Modular 3U/42HP train computer, Intel Atom

D525 1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power,

WLAN module (available on request), Win7 Embedded (32-bit), -40

to 70°C operating temperature range, compliant with EN 50155 Class

•TC-6110-CT-W7E: Modular 3U/42HP train computer, Intel Atom

D525 1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power,

conformal coating, WLAN module (available on request), Win7

Embedded (32-bit) , -25 to 55°C operating temperature range,

compliant with EN 50155 Class T1

•TC-6110-CT-T-W7E: Modular 3U/42HP train computer, Intel Atom

D525 1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power,

conformal coating, WLAN module (available on request), Win7

Embedded (32-bit), -40 to 70°C operating temperature range,

compliant with EN 50155 Class TX

•TC-6110-LX: Modular 3U/42HP train computer, Intel Atom D525 1.8

GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power, WLAN

module (available on request), Linux Debian 7, -25 to 55°C operating

temperature range, compliant with EN 50155 Class T1

•TC-6110-T-LX: Modular 3U/42HP train computer, Intel Atom D525

1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power, WLAN

module (available on request), Linux Debian 7, -40 to 70°C operating

temperature range, compliant with EN 50155 Class TX

•TC-6110-CT-LX: Modular 3U/42HP train computer, Intel Atom D525

1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power,

conformal coating, WLAN module (available on request), Linux

Debian 7, -25 to 55°C operating temperature range, compliant with

EN 50155 Class T1

•TC-6110-CT-T-LX: Modular 3U/42HP train computer, Intel Atom

D525 1.8 GHz CPU, 4 expansion slots, 24 to 110 VDC isolated power,

conformal coating, WLAN module (available on request), Linux

Debian 7, -40 to 70°C operating temperature range, compliant with

EN 50155 Class TX

- 3 -

Each basic system model is shipped with following standard items:

•TC-6110 train computer

•Rackmount kit

•Power switch with cable extender

•Power cable

•Documentation CD or DVD

•Quick installation guide (printed)

•Warranty card

Hardware Installation

Front View

Front Panel LEDs

Information about each LED is given in the following table.

LED Name

LED Color

LED Function

Power

Green

Power is on and functioning normally

Off

Power is off or power system error

System

Ready

Yellow

Logged in to OS, functioning normally

Off

Tx (P1)

Green

Serial port P1 transmitting data

Off

Serial port P1 not transmitting data

Rx (P1)

Yellow

Serial port P1receving data

Off

Serial port P1 not receiving data

X1-X4

Green

Programmable by users

Off

Programmable by users

LAN (P1-P2)

Green

Working 100 Mbps Ethernet link

Yellow

Working 1000 Mbps Ethernet link

Off

Disconnected or short circuit

Connecting to a Display

The TC-6110 comes with a female D-Sub DE-15 VGA interface on the

front panel. To ensure that the monitor image remains stable, be sure to

tighten the connector’s thumbscrews after connecting the cable.

Reset Button

The reset button on the TC-6110’s front panel initiates a soft system

reboot. Once the system has completed the reboot the System Ready

LED will maintain a steady glow.

- 4 -

Powering the TC-6110

TC-6110 computers come with DC power inputs. When connecting the

TC-6110 to an office AC source (for testing), an adaptor must be used. To

connect the AC adaptor, follow these steps:

Step 1: Connect the ends of the extended power switch cable to the male

portion of the 2-pin Euroblock (provided in the package).

Step 2: Plug the male Euroblock into the matching female terminal on the

front panel.

Step 3: Make sure the power switch is turned off (the Open position as

indicated in the diagram below).

Step 4: Connect the earth/ground cable to the

Phillips

-head ground connector on the lower right

corner of the

front panel.

Step 5: Connect the power cable (CBL-Power Jack to M12) to the M12

(A-coded, 5-pin, male) connector as shown at right. Then connect the

power connector to power input 1 on the front panel.

Step 6: On the other side of the power cable, connect to the

PWR-24250-DT-S1 power adaptor (optional), and a PWC-series power

cord (optional).

Step 7: To check power redundancy, use the same method to connect

the power to the power input 2.

Step 8: Switch on the TC-6110 (Short state). If power supply is

connected properly, both power input and system power LEDs will be on

(green), as well as the yellow Ready LED.

- 5 -

When installing TC-6110 computers at a field site, follow these steps:

Step 1: Connect the ends of the extended power switch cable to the male

portion of the 2-pin Euroblock (provided); you may also choose to not use

the cable extender, and connect the switch to the terminal directly.

Step 2: Plug the male Euroblock into the matching female terminal on the

front panel.

Step 3: Make sure the power switch is turned off (the Open position as

indicated in the diagram below).

Step 4: Connect the earth/ground cable to the

Phillips

-head ground connector on the

lower right corner

of the

front panel.

Step 5: Connect the M12 connector to the power source using the pin

assignment at right.

Step 6: Connect this M12 connector to power input 1 on the front panel of

the computer.

Step 7: Use the same method to provide power to power input 2.

Step 8: Turn on the computer. If the power supply is connected properly,

the Power and System Power LEDs will be on, and the yellow Ready

LED will also be on. If you need to disconnect the power, reverse these

steps.

Please note that the branch circuit over current protection must be rated

maximum 10 A.

- 6 -

USB Ports

The TC-6110 embedded computer

has three USB 2.0 ports: two

come with type A connectors

and one with

an M12 (D-coded,

-pin, female) connector. All of

the ports are UHCI, Rev 2.0

compliant and support Plug & Play

USB

D+

D-

+5V

GND

N.C.

and hot swapping. These ports can be used to connect USB devices, such

as a keyboard, mouse, USB flash disk, and USB CD

-ROM. In addition,

both USB ports support system boot up, which can be activated by

modifying the BIOS settings.

See the following table and figure for the

assignment of the USB host with M12 connector.

Serial Ports

The TC-6110 comes with one DB-9 (male) RS-232 serial interface. The

pin assignments for the ports are shown in the following table:

RS-232

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

Ethernet Ports

The TC-6110 has two 10/100/1000 Mbps LAN ports with M12 (A-coded,

8-pin, female) hardware interfaces. When the cable is properly connected,

the LEDs on the front panel will glow to indicate a successful link.

10/100 Mbps

1000 Mbps

–

DC+

–

DD+

–

DD-

TX-

DA-

RX+

DB+

TX+

DA+

–

DC-

RX-

DB-

These LAN ports use DHCP for the IP address.

- 7 -

Audio Input/Output

The TC-6110 Series comes with an audio input/output connector and an

M12 (A-coded, 8-pin, female) connector. Use a cable to connect the audio

input and output. See the following figure and table for pin assignments.

Audio

Line in, right

GND

–

Line in, left

Line out, left

–

Line out, right

GND

Installing the SSD/HDD into the Storage Tray

The TC-6110 computers come with two storage trays that can be installed

with SSD or HDD for storage expansion. Refer to the hardware manual for

detailed description for the installation steps.

Configuring the Ethernet Interface

Follow these steps to configure the Ethernet interface for a static network

address:

Step 1:

Go to Start Control Panel Network and Internet 

Network Connections.

Step 2:

Go to the Local Area Connection tab and click Properties,

then

click Internet Protocol (TCP/IP), and lastly select

Properties.

Step 3:

Click OK after inputting the proper IP address and netmask.

Refer to User’s Manual for additional configuration information.

Andere Handbücher für TC-6110 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Industrie-PC Handbücher

Moxa Technologies

Moxa Technologies UC-7122 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies TC-6110-W7E Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-685 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-710 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8200 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-681-I-SP-CE Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-3100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies V481-XPE Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8200 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies TC-6110-W7E Bedienungsanleitung

Moxa Technologies

Moxa Technologies AIG-300 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EM-1240-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-2200A Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies UC-7400-LX Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-662A-8 Gebrauchsanweisung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA260 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IA241-LX Bedienungsanleitung

Moxa Technologies

Moxa Technologies UC-8100 Series Gebrauchsanweisung

Moxa Technologies

Moxa Technologies BXP-C100 Series Gebrauchsanweisung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung