Moxa Technologies VPort P06HC-1MP-M12 Bedienungsanleitung

P/N: 1802000061011

*1802000061011*

VPort P06HC-1MP-M12

Quick Installation Guide

Moxa IP Camera

Edition 2.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The VPort P06HC-1MP-M12 square-type IP cameras provide an HD (720P,

1280 x 720) video image, and feature 3 H.264/MJPEG video streams,

giving them the versatility and ruggedness to excel in many different

installations and environments for IP video surveillance applications. In

addition, the cameras comply with a portion of EN 50155 specifications,

covering operating temperature, power input voltage, surge, ESD, and

vibration, making them suitable for a variety of industrial applications.

The cameras feature a -25 to 55°C operating temperature, a rugged M12

Ethernet port, 1 built-in microphone, 1 digital input, PoE power inputs,

IP66 rain and dust protection, and a selectable lens.

Package Checklist

Moxa’s VPort P06HC-1MP-M12 is shipped with the following items. If any

of these items are missing or damaged, please contact your customer

service representative for assistance.

1 × VPort P06HC-1MP-M12 (lens included)

Standard Temperature Models

Lens

VPort P06HC-1MP-M12-CAM36

3.6 mm

Accessories Package

Torx screw

driver for

loosening

the

camera’s

front lens

cover

Silica gel dessicant and

hook fastener for absorbing

the moisture inside the

camera

2 L-type installation kits and 4

nylock screws

for mounting the

camera

Sticker for Camera Mounting Positions

Quick installation guide (printed)

- 3 -

Documentation and Software CD (includes User’s Manual, Quick

Installation Guide, and VPort Utility)

Warranty card

NOTE

Check the model name on the VPort’s side label to determine if

the model name is correct for your order.

NOTE

This product must be installed in compliance with your local laws

and regulations.

Features

•1/2.7”HD progressive CMOS image sensor

•Video stream up to 30 frames/sec at WXGA (1280x800) resolution

•High image quality with WDR (wide dynamic range) and DNR (Digital

Noise Reduction) supported

•Minimum illumination is up to 0.2 lux (color)

•Supports MJPEG and H.264 Dual Codecs

•Provides 3 video streams for H.264 and MJPEG simultaneously

•Supports video quality configuration with fixed bit rate (CBR) and

fixed quality (VBR)

•Video latency under 200 ms

•DynaStream™ for network efficiency with dynamic frame rate change

•CBR Pro™ supported for high image quality in limited bandwidth

transmissions

•WXGA/720P/SVGA/Full D1/4CIF/VGA/CIF/ QCIF resolution

•TCP, UDP, and HTTP network transmission modes

•Supports DHCP OPT66/67 for automatic configuration from a TFTP

server, making it easy to batch configure several units

•Supports RTSP streaming

•Supports multicast (IGMP) video streaming

•Supports SNMP (V1/V2C/V3) for network system integration and

management

•Supports QoS (ToS) for transmission priority

•Built-in web server for easy configuration

•Accessible IP filtering

•UPnP supported

•Complies with all EN 50155 mandatory test items*

*This product is suitable for rolling stock railway applications, as defined

by the EN 50155 standard. For a more detailed statement, click here:

www.moxa.com/doc/specs/EN_50155_Compliance.pdf

•1 10/100BaseT(X) port with M12 D-code connector

•1 built-in microphone for audio input

•1 digital input with 5-pin M12 connector for external events

•IP66 rain and dust protection

•PoE (Power-over-Ethernet, IEEE 802.3af) supported

•-25 to 55°C (EN 50155, class T1) operating temperature for rolling

stock environments

•CE, FCC, UL 60950-1

•Built-in tamper alarm and Video Motion Detection (VMD)

•Pre, Trigger, and post snapshot images supported

•Sequential snapshot images supported

•Supports SMTP and FTP for alarm message transmission

•Supports HTTP event server

- 4 -

•5-year warranty

Product Description

Appearance

•4-pin female D-code M12 Ethernet connector: Can be used for

both the PoE power supply (Mode A) and Auto MDI/MDI-X Ethernet

connection

NOTE

To connect the VPort P06HC-1MP-M12 to a network, use an

Ethernet cable with D

-code M12 connector and an M12 PoE

swi

tch or RJ45 PoE switch.

M12 male to M12 male cable

M12 PoE Switch (e.g.,

TN-5508-4PoE)

M12 male to RJ45 cable

RJ45 PoE switch (e.g.,

EDS-P510)

NOTE

The power input rating of the VPort P06HC-1MP-M12 is 48 VDC,

0.13 A, with maximum power consumption approximately 6.3 W.

- 5 -

NOTE

The equipment is designed for in building installation only and is

not intended to be connected to exposed (outside a plant)

networks

•5-pin M12 male connector: The VPort P06HC-1MP-M12 supports

one digital input with 5-pin M12 male connector. This DI is used for

connecting with external device for triggering an event or alarm.

•

Digital input:

ax. 8 mA,

Low: +13 V to +30 V; High: -30 V to +3 V

NOTE

This digital input is for connecting with an external device, such

as a button, for triggering an event and alarm. The VPort

P06HC

-1MP-M12 can send messages via an IP network to the

management software at a remote site.

•Built-in microphone: The VPort P06HC-1MP-M12 is equipped with a

built-in microphone to receive external sounds. The sound will be

digitized and compressed as an audio stream for network

transmission with the video stream.

NOTE

The effective distance for the VPort P06HC-1MP-M12’s built-in

microphone is 100 cm.

•Removable lens cover: The VPort P06HC-1MP-M12 is designed with

a removable cover for fine-tuning the lens angle manually. The user

can remove this lens cover after loosening the 6 torx screws.

NOTE

The VPort

P06HC-1MP-M12’s optical lens cover is coated with a

high performance waterproof coating. Please use the scrubbing

cloth to light clean the cover.

NOTE

The color of the lens cover can be customized based on your

installation environment. Please contact

your Moxa sales

representative for customization service.

- 6 -

Inside the Camera

•Thumb screw for fixing the lens’s position: To tune the lens’s

position, loosen the thumb screw, and then retighten it after the

position tuning is done.

•Lens with fixed focal length: The VPort P06HC-1MP-M12 series

supports a fixed focal-length lens. Choose the appropriate

focal-length lens based on the viewing angle and object distance.

•Board plate screws: these 2 screws are for loosening the board

plate, which can be pulled out for tuning the camera lens position.

Hardware Installation

NOTE

o flush mount the VPort P06HC with an intercom, use the

-FD1 accessory (must be ordered separately) to install the

camera

. If you do not want to use the VP-FD1, refer to the

dimensio

ns on the installation sticker for customizing your own

installation.



using

the VP-FD1 for installing with an

intercom

- 7 -

VP-FD1

Step 1: Screw the 2 L-type installation plates onto the VPort P06HC.

Vertical mountable

Horizontal mountable

Step 2: Use the installation sticker to drill the holes for flush-mounting

the VPort P06HC with the VP-FD1.

- 8 -

NOTE

The screw holes for mounting the 2 VP-FD1’s mounting kits are

countersunk

holes with 8 mm top diameter and 4.3 mm chamfer.

Take this into consideration when drilling these 4 screw holes.

Step 3: Install the VP-FD1’s mounting kit.

Screw 4 nylock M4 screws on the 4

counters

unk screw holes with 2

-FD1’s mounting kits.

Front

view

ar view

Step 5: Mount the VPort P06HC with the VP-FD1’s mounting kit.

- 9 -

Step 6: Mount the VP-FD1’s front decorative plate on the wall.

NOTE

The type and color of VP-FD1 can be customized by request.

Please contact a Moxa sales representative

for this customization

service.

Software Installation

Step 1: Configure the VPort P06HC-1MP-M12’s IP address.

When the VPort P06HC-1MP-M12 is first powered on, the POST (Power On

Self Test) will run for a few moments (about 30 seconds). The network

environment determines how the IP address is assigned.

Network Environment with DHCP Server

For this network environment, the unit’s IP address will be assigned by

the network’s DHCP server. Refer to the DHCP server’s IP address table to

determine the unit’s assigned IP address. You may also use the Moxa

VPort and EtherDevice Configurator Utility (edscfgui.exe), as described

below:

Using the Moxa VPort and EtherDevice Configurator Utility

(edscfgui.exe)

1. Run the edscfgui.exe program to search for the VPort. After the

utility’s window opens, you may also click on the Search button

to initiate a search.

2. When the search has concluded, the Model Name, MAC address, IP

address, serial port, and HTTP port of the VPort will be listed in the

utility’s window.

- 10 -

You can double click the selected VPort, or use the IE web browser to

access the VPort’s web-based manager (web server).

Non DHCP Server Network Environment

If your VPort 16-M12 is connected to a network that does not have a

DHCP server, then you will need to configure the IP address manually.

The default IP address of the VPort 16-M12 is 192.168.127.100 and the

default subnet mask is 255.255.255.0. Note that you may need to change

your computer’s IP address and subnet mask so that the computer is on

the same subnet as the VPort.

To change the IP address of the VPort manually, access the VPort’s web

server, and then navigate to the System Configuration Network 

General page to configure the IP address and other network settings.

Check Use fixed IP address to ensure that the IP address you assign is not

deleted each time the VPort is restarted.

Step 2: Accessing the VPort P06HC-1MP-M12’s web-based manager

Type the IP address in the web browser’s address input box and then

press enter.

Step 3: Install the ActiveX Control Plug-in

A security warning message will appear the first time you access the

VPort’s web-based manager. The message is related to installing the

VPort AcitveX Control component on your PC or notebook. Click Yes to

install this plug-in to enable the IE web browser for viewing video images.

NOTE

For Windows XP SP2 or later operating systems, the ActiveX

Control component will be blocked for system security reasons.

In this case, the VPort’s security warning message window may

not appear. You

should unlock the ActiveX control blocked

function or disable the security configuration to enable the

installation of the VPort’s ActiveX Control component.

Step 4: Access the homepage of the VPort P06HC-1MP-M12’s web-based

manager.

After installing the ActiveX Control component, the homepage of the

VPort P06HC-1MP-M12’s web-based manager will appear. Check the

following items to make sure the system was installed properly:

1. Video Images

2. Video Information

Andere Handbücher für VPort P06HC-1MP-M12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies IP-Kamera Handbücher

Moxa Technologies

Moxa Technologies VPort 36-1MP Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort P16-1MP-M12 Series Handbuch

Moxa Technologies

Moxa Technologies VPort P06HC-1MP-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 26A-1MP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort P06-1MP-M12-CAM36 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 36-1MP Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPORT P06-1MP-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 36-1MP Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 56-2MP Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 26 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 26A-1MP Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPORT P06-1MP-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 36-1MP Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 56-2MP Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort P06-2L25M Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 16-M12 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies Vport P16-1MP-M12-IR Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 06EC-2V36M Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung