Moxa Technologies OnCell G3100 Series Bedienungsanleitung

OnCell G3100 Series User’s Manual

Third Edition, September 2008

www.moxa.com/product

Reproduction without permission is prohibited.

OnCell G3100 Series User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in

accordance with the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

MOXA is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the

part of Moxa.

Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but

not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this

manual, or to the products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no

responsibility for its use or for any infringements on the rights of third parties that may result from its use.

This product may include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the

publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll-free: 1-888-669-2872

Tel: +1-714-528-6777

Fax: +1-714-528-6778

Moxa China (Shanghai office):

Toll-free: 800-820-5036

Tel: +86-21-5258-9955

Fax: +86-10-6872-3958

Moxa Europe:

Tel: +49-89-3 70 03 99-0

Fax: +49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

Table of Contents

Chapter 1 Introduction ...............................................................................................1-1

Overview.............................................................................................................................. 1-2

Package Checklist................................................................................................................. 1-2

Product Features................................................................................................................... 1-3

Product Specifications..........................................................................................................1-3

Chapter 2 Getting Started ..........................................................................................2-1

Panel Layout......................................................................................................................... 2-2

OnCell G3110/G3150/G3110-HSDPA/G3150-HSDPA .............................................. 2-2

Connecting the Hardware..................................................................................................... 2-4

Wiring Requirements.................................................................................................... 2-4

SIM Card Installation ................................................................................................... 2-5

Connecting the Power................................................................................................... 2-6

Connecting the I/O Port................................................................................................ 2-6

Connecting to the Network........................................................................................... 2-7

Connecting to a Serial Device ...................................................................................... 2-7

Adjustable Pull High/Low Resistors for the RS-485 Port (OnCell G3150/OnCell

G3150-HSDPA)............................................................................................................ 2-7

LED Indicators ............................................................................................................. 2-9

Reset Button ............................................................................................................... 2-10

Chapter 3 Initial IP Address Configuration...............................................................3-1

Static and Dynamic IPAddresses......................................................................................... 3-2

Factory Default IPAddress................................................................................................... 3-2

Configuration Options.......................................................................................................... 3-2

OnCell Search Utility ................................................................................................... 3-2

Web Console ................................................................................................................ 3-2

ARP .............................................................................................................................. 3-2

Telnet Console.............................................................................................................. 3-3

Serial Console............................................................................................................... 3-8

Chapter 4 Introducing Serial Port Operation Modes ...............................................4-1

Overview.............................................................................................................................. 4-2

Device Control Applications ................................................................................................ 4-2

Real COM and Secure Real COM Modes.................................................................... 4-2

Types of Real COM Connection .................................................................................. 4-3

Reverse Real COM and Secure Reverse Real COM Modes......................................... 4-4

Types of Reverse Real COM Connection..................................................................... 4-5

RFC 2217 Mode........................................................................................................... 4-5

Socket Applications.............................................................................................................. 4-5

TCP Server and Secure TCP Server Modes ................................................................. 4-5

Types of TCP Server Connection................................................................................. 4-6

TCP Client and Secure TCP Client Modes................................................................... 4-7

Types of TCP Client Connection.................................................................................. 4-8

UDP Mode.................................................................................................................... 4-9

Types of UDP Connection............................................................................................ 4-9

Ethernet Modem Mode....................................................................................................... 4-10

SMS Tunnel Mode.............................................................................................................. 4-10

Disabled Mode.....................................................................................................................4-11

Chapter 5 Using the Web Console ............................................................................5-1

Using Your Web Browser..................................................................................................... 5-2

Browser Cookie Settings .............................................................................................. 5-2

Trusted Site Settings..................................................................................................... 5-3

Opening the Web Console............................................................................................ 5-4

Web Console Navigation...................................................................................................... 5-5

Basic Settings ....................................................................................................................... 5-5

Server Settings.............................................................................................................. 5-6

Time Settings................................................................................................................ 5-6

Network Settings.................................................................................................................. 5-7

Basic Network Settings................................................................................................. 5-7

Advanced Network Settings......................................................................................... 5-9

Auto IP Report Settings................................................................................................ 5-9

Chapter 6 Cellular Network Settings.........................................................................6-1

GSM GPRS Settings (For OnCell G3110 and G3150)......................................................... 6-2

Cellular Setting (For OnCell G3110-HSDPA/G3150-HSDPA)............................................ 6-2

GSM or GSM (CSD) Operation Mode......................................................................... 6-3

GPRS or GPRS/EDGE/UMTS/HSDPA Operation Mode............................................ 6-4

SMS Operation mode ................................................................................................... 6-5

Chapter 7 Configuring Serial Port Operation Modes...............................................7-1

Port Setting Basics................................................................................................................ 7-2

Device Control Applications ................................................................................................ 7-2

Real COM Mode .......................................................................................................... 7-2

Reverse Real COM Mode............................................................................................. 7-5

RFC2217 Mode ............................................................................................................ 7-8

Socket Applications............................................................................................................ 7-10

TCP Server Mode....................................................................................................... 7-10

TCP Client Mode........................................................................................................ 7-13

UDP Mode.................................................................................................................. 7-16

Ethernet Modem Mode....................................................................................................... 7-18

SMS Tunnel Mode.............................................................................................................. 7-21

Disabled Mode.................................................................................................................... 7-23

Chapter 8 Additional Serial Port Settings.................................................................8-1

Port Communication Parameters.......................................................................................... 8-2

Serial Parameters.................................................................................................................. 8-2

Port Data Buffering/Log....................................................................................................... 8-3

Port Chipher Settings............................................................................................................ 8-4

Chapter 9 System Management Settings .................................................................9-1

Misc. Network Settings ........................................................................................................ 9-2

Accessible IP List......................................................................................................... 9-2

SNMP Agent Settings................................................................................................... 9-3

DDNS........................................................................................................................... 9-4

Host Table .................................................................................................................... 9-4

System Log Settings..................................................................................................... 9-5

Auto Warning Settings.......................................................................................................... 9-6

Event Settings............................................................................................................... 9-6

Serial Event Settings..................................................................................................... 9-7

E-mail Alert.................................................................................................................. 9-8

SNMP Trap................................................................................................................... 9-9

SMS Alert..................................................................................................................... 9-9

Maintenance ....................................................................................................................... 9-10

Console Setting........................................................................................................... 9-10

Ping............................................................................................................................. 9-10

Firmware Upgrade...................................................................................................... 9-11

Configuration Import/Export...................................................................................... 9-11

Load Factory Defaults ................................................................................................ 9-12

Change Password........................................................................................................ 9-13

Certificate........................................................................................................................... 9-14

Ethernet SSL Certificate Import................................................................................. 9-14

Certificate/Key Delete................................................................................................ 9-14

System Monitoring............................................................................................................. 9-15

Serial to Network Connections................................................................................... 9-15

Serial Port Status ........................................................................................................ 9-15

Serial Port Error Count............................................................................................... 9-16

Serial Port Settings ..................................................................................................... 9-16

Chipher Usage Status.................................................................................................. 9-17

System Status...................................................................................................................... 9-17

Network Connections ................................................................................................. 9-17

Network Statistics....................................................................................................... 9-18

Serial Data Log........................................................................................................... 9-18

System Log................................................................................................................. 9-19

Routing....................................................................................................................... 9-19

Dout State................................................................................................................... 9-20

Din and Power Status ................................................................................................. 9-20

Save Configuration............................................................................................................. 9-21

Restart................................................................................................................................. 9-21

Restart System............................................................................................................ 9-21

Restart Ports................................................................................................................ 9-22

Chapter 10 Software Installation/Configuration.......................................................10-1

Overview............................................................................................................................ 10-2

OnCell Windows Driver Manager...................................................................................... 10-2

Installing OnCell Windows Driver Manager.............................................................. 10-2

Using OnCell Windows Driver Manager ................................................................... 10-5

OnCell Search Utility ....................................................................................................... 10-16

Installing OnCell Search Utility ............................................................................... 10-16

Configuring OnCell Search Utility........................................................................... 10-18

Moxa OnCell Linux Real TTY Driver.............................................................................. 10-22

Basic Procedure........................................................................................................ 10-22

Hardware Setup ........................................................................................................ 10-22

Installing Linux Real TTY Driver Files ................................................................... 10-22

Mapping TTY Ports.................................................................................................. 10-23

Removing Mapped TTY Ports.................................................................................. 10-23

Removing Linux Driver Files................................................................................... 10-24

Moxa OnCell UNIX Fixed TTY Driver ........................................................................... 10-24

Installing the UNIX Driver....................................................................................... 10-24

Configuring the UNIX Driver .................................................................................. 10-25

Appendix A Pinouts and Cable Wiring........................................................................A-1

Port Pinout Diagrams .......................................................................................................... A-2

RS-232 (male DB9) Pinouts........................................................................................ A-2

4W/2W RS-485/RS-422 (Terminal Block) Pinouts..................................................... A-2

Power Input and Relay Output Pinouts........................................................................ A-2

Cable Wiring Diagrams....................................................................................................... A-3

Serial Cables................................................................................................................ A-3

Pin Assignments for DB9 and DB25 Connectors........................................................ A-4

Appendix B RFC2217....................................................................................................B-1

Appendix C Dynamic Domain Name Server ...............................................................C-1

Overview..............................................................................................................................C-1

Configuration........................................................................................................................C-2

Appendix D Well Known Port Numbers ......................................................................D-1

Appendix E Auto IP Report Protocol........................................................................... E-1

Appendix F GSM Alphabet............................................................................................F-1

Appendix G Default Settings........................................................................................G-1

Chapter 1 Introduction

The OnCell G3100 series of cellular IP-modems have many exceptional features. There are

currently four models in the OnCell G3100 series of IP-modems: the OnCell G3110, OnCell G3150,

OnCell G3110-HSDPA, and OnCell G3150-HSDPA. The main differences between the models are

the serial interface types. Cellular IP-modems give you an easy way to connect your serial devices to

cellular mobile networks.

The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Product Specifications

OnCell G3100 Series User’s Manual Introduction

1-2

Overview

The OnCell G3100, which can be used to connect any serial device to a cellular network, supports a

number of different operation modes. The OnCell COM driver turns the OnCell G3100’s serial

ports into virtual COM ports that allow you to communicate with your serial devices remotely over

the cellular network. The OnCell G3100 comes pre-installed with the TCP/IP protocol suite to

transmit data back and forth between the serial device and GPRS/EDGE TCP/IP network.

The OnCell G3100 also supports Secure TCP Server, Secure TCP Client, Reverse Real COM, and

Secure Reverse Real COM modes for security critical applications, such as access control, and

remote site management.

The OnCell G3100 also comes with a built-in relay output that can be configured to indicate the

priority of events when notifying or warning engineers in the field, and the two digital inputs allow

you to connect basic I/O devices, such as sensors, to the cellular network.

For some applications, data must be delivered reliably even if communication is disrupted. The

OnCell G3100 provides a powerful function to ensure that data is buffered in case of a

communication failure. When a communication failure occurs, the data is buffered in the OnCell

G3100 until communication is resumed, at which point the buffered data is sent to its destination.

Package Checklist

Each OnCell G3100 serial cellular IP Modem is shipped in a separate box with standard

accessories. In addition, several optional accessories can be ordered separately. When you receive

your shipment, please check the contents of the box carefully, and notify your Moxa sales

representative if any of the items are missing or appear to be damaged.

OnCell G3100 Series cellular IP Modems are shipped with the following items:

Standard Accessories

yDocument & Software CD

yOmni 1 dBi rubber SMA antenna (OnCell G3100 model name: ANT-CQB-O-1, OnCell

G3100-HSDPA model name: ANT-WCDMA-O-1.5 BK)

yDin-Rail Kit

y5-pin terminal block (screw type)

y10-pin terminal block (screw type)

yProduct warranty statement

yQuick Installation Guide

Optional Accessories

yPower Adaptor: 1.2 A (or above) @ 12 V

yDC power supply

yPower jack to terminal block cable

yQuad-band GSM/GPRS/EDGE antennas for OnCell G3110/G3150 series

(impedance = 50 ohms):

ANT-CQB-O-0-3m: Omni 0dBi/10cm, magnetic SMA antenna, 3 m

ANT-CQB-O-3-3m: Omni 3dBi/25cm, magnetic SMA antenna, 3 m

ANT-CQB-O-5-3m: Omni 5dBi/37cm, magnetic SMA antenna, 3 m

OnCell G3100 Series User’s Manual Introduction

1-3

Product Features

All models in the OnCell G3100 series have the following features:

yQuad-band 900/1800, 850/1900 MHz GSM/GPRS/EDGE

yTri-band UMTS/HSDPA 850/1900/2100 MHz (OnCell G3100-HSDPA)

yVersatile operation modes, including Real COM, Reverse Real COM, RFC2217, TCP Server,

TCP Client, UDP, Ethernet Modem, and SMS Tunnel

yPort buffering function to prevent loss of serial data when communication is disrupted

ySecure data access modes including Secure Real COM, Secure Reverse Real COM, Secure TCP

Client, and Secure TCP Server

yAny Baudrate feature for easy configuration of custom baudrates

yRedundant DC power inputs

yLED indicators for status and signal level

y2 digital inputs and 1 relay output

Product Specifications

OnCell G3110/G3150 OnCell G3110/G3150-HSDPA

Hardware

CPU Moxa CPU, 192 MHz

RAM 8 MB 16 MB

Flash ROM 4 MB 8 MB

LAN Interface

Ethernet 10/100 Mbps, RJ45 connector

Protection Built-in 1.5 KV magnetic isolation

Cellular Interface

Standard Compliance GSM/GPRS/EDGE UMTS/HSDPA

Band Selection Quad-band

850/900/1800/1900 MHz Tri-band 850/1900/2100 MHz

Quad-band 850/900/1800/1900

MHz

Tx Power 1 watt GSM1800/1900, 2

watt EGSM850/900 1 watt GSM1800, 2 watt

GSM900, 0.25 watt

UMTS/HSDPA, 0.5 watt

EDGE900, 0.4 watt EDGE1800

GPRS Multi-slot class 12 10

GPRS Mobile Station Class Class B

EDGE Multi-slot class 12 10

EDGE Mobile Station Class Class B

GPRS Coding Schemes CS1 to CS4

SIM Control 3V

Serial Interface

No. of Ports 1

ESD Protection 15 KV

Serial Standards G3110/G3110-HSDPA: RS-232 (DB9 male connector)

G3150/G3150-HSDPA: RS-232 (DB9 male connector),

RS-422/485 (5-pin terminal block connector)

Serial Communication Parameters

OnCell G3100 Series User’s Manual Introduction

1-4

Parity None, Even, Odd, Space, Mark

Data Bits 5, 6, 7, 8

Stop Bit(s) 1, 1.5, 2 (when parity = None)

Flow Control RTS/CTS, XON/XOFF

Speed 50 bps to 921.6 Kbps

Serial Signals

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422 Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w Data+, Data-, GND

I/O Interface

Alarm Contact 1 relay output with current carrying capacity of 1A@24 VDC

Digital Input 2 inputs electrically isolated from the electronics

DIN OFF: 0 to 3.3 VDC,

DIN ON : 10 to 48 VDC (I1 to COM_1/I2 to COM_2)

Software Features

Network Protocols ICMP, TCP/IP, UDP, DHCP, Telnet, DNS, SNMP, HTTP,

SMTP, HTTPS, SNTP, ARP, SSL

Operation Modes Real COM, Reverse Real COM, TCP Server, TCP Client,

UDP, RFC2217, Ethernet Modem, SMS Tunnel

Secure Operation Modes Secure Real COM, Secure Reverse Real COM, Secure TCP

Client, Secure TCP Server

Configuration and Management

Options

SNMP MIB-II, SNMP Private MIB, SNMPv1/v2c/v3, DDNS,

IP Report, Web/Telnet/Serial Console/SSH

Authentication Local user-name and password

Security Accessible IP list

Utilities Windows 95/98/ME,Windows NT, Windows

2000/XP/2003/Vista/Server 2008, Windows

XP/2003/Vista/Server 2008 x64 Edition

Windows Drivers Windows 95/98/ME,Windows NT, Windows

2000/XP/2003/Vista/Server 2008, Windows

XP/2003/Vista/Server 2008 x64 Edition

Fixed TTY Drivers SCO Unix, SCO OpenServer 5, SCO OpenServer 6, UnixWare

7, SVR4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD 5,

FreeBSD 6

Real TTY Drivers Linux kernels 2.2.x, 2.4.x, 2.6.x

Physical Characteristics

Housing Aluminum, providing IP30 protection

Power Requirements

Input Voltage 12 to 48 VDC

Data Link 585 to 900 mA (peak) @ 12 V

Power EFT/Surge Protection 2 KV

Environment

Operating temperature -30 to 55°C (-22 to 131°F), 5 to 95% RH

Storage temperature -40 to 75°C (-40 to 167°F)

Regulatory Approvals

EMC CE: EN55022 Class A/EN55024

FCC: FCC part 15 subpart B, Class A

EN61000-4-2 (ESD) Level 4

Andere Handbücher für OnCell G3100 Series

Inhaltsverzeichnis

Andere Moxa Technologies Modem Handbücher

Moxa Technologies

Moxa Technologies OnCell G3111 Bedienungsanleitung

Moxa Technologies

Moxa Technologies oncell G2100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3111 Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G2151I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3111 Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell G3100 Series Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung