Moxa Technologies CN2600 Series Bedienungsanleitung

P/N: 1802026000217

*1802026000217*

CN2600 Series

Quick Installation Guide

Edition 6.1, November 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The Moxa CN2600 dual-LAN terminal servers have 8 or 16 RS-232 or

RS-232/422/485 ports and dual 10/100 Mbps Ethernet LAN ports, and

some models come with dual AC power inputs. The CN2600 terminal

servers are used to connect terminals, modems, printers, and other

serial devices to LAN hosts, and all models comply with TCP/IP and

IEEE 802.3 specifications using standard twisted pair 10/100BaseTX

cable as the transmission medium.

CN2600 Series Models

The CN2600 Series includes the following models: CN2610-8, CN2610-

8-2AC, CN2610-16, CN2610-16-2AC, CN2650-8, CN2650-8-2AC-T,

CN2650-8-2AC, CN2650-16, CN2650-16-2AC-T, CN2650-16-2AC,

CN2650I-8, CN2650I-8-2AC, CN2650I-16, CN2650I-16-2AC, CN2650I-

8-HV-T, CN2650I-16-HV-T.

Package Checklist

The CN2600 dual-LAN terminal server products are shipped with the

following items:

•1 CN2600 Series terminal server

•Power cord (AC models only)*

•1 DB9 serial cable (CBL-RJ45F9-150)

•1 DB25 serial cable (CBL-RJ45M25-150)

•Rackmount kit (includes 2 brackets and 8 screws)

•Quick installation guide (this guide)

*Power cords are available with US, Euro, UK, and JP plugs.

Hardware Introduction

NOTE

The wide temperature models do not come with the LCM

display panel and push buttons. The LCM description below

applies only to standard temperature models.

Front Panel

LED

Color

Description

Reset None Press the Reset button for 5 seconds to load

factory defaults. The CN2600 will beep twice

when the configuration has been reset.

Ready

Red

Used for configuring the IP address and other

parameters.

Green

Lights up when the CN2600 system is ready.

Serial Tx

Green

Flashes to indicate serial port transmission.

Serial Rx

Yellow

Flashes to indicate serial port reception.

- 3 -

Rear Panel

CN2650-16

CN2650-16-2AC

CN26501-16-2AC

CN26501-16-HV-T

LCM Display

If the CN2600 is working properly, the LCM panel will display a green

color. The red Ready LED will also light up, indicating that the CN2600

is receiving power. After the red Ready LED turns to green, you will see

a display similar to the following: (Example)

CN2610-16:

The CN2610’s name

03:

The CN2610’s local sequence number

192.168.127.254:

The CN2610’s IP address

There are four push buttons on the CN2600 nameplate:

Button

Name

Action

Activates the main menu, or returns to an

upper level.

up cursor Scrolls up through a list of items shown on the

LCM panel’s second line.

down cursor

Scrolls down through a list of items shown on

the LCM panel’s second line.

SEL

select

Selects the option listed on the LCM panel’s

second line.

- 4 -

Use the buttons to access the CN2600’s function menus. As you move

through the functions and settings, the top line shows the current menu

or submenu name, and the bottom line shows the submenu name or

menu item. Press the SEL button to access the item displayed on the

bottom line.

Refer to the CN2600 Series User’s Manual for more details.

Hardware Installation

Installing the CN2600

Open the package and attach the CN2600 to a desktop, or fasten it to

the rack cabinet.

Wiring Requirements

1. Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communication wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

2. Where necessary, we strongly advise labeling wiring to all devices

in the system.

Connecting the Power

AC: Connect the CN2600 100-240 VAC power line with its AC

connector. If the power is properly supplied, the “Ready” LED will show

a solid red color until the system is ready, at which time the “Ready”

LED will change to a green color.

DC: Connect the NPort CN2650I-HV’s power cord to the DC connector,

and then follow the steps given below:

Take the CN2650I-8-HV-T as an example. Loosen the

screws on the V+ and V

- terminals of the CN2650I-8-

HV-T terminal block. Connect the power

cord’s 100 VDC wire to the terminal block’s V+ terminal, and the power

cord’s DC Power Ground wire to the terminal block’s V

- terminal, and

then tighten the terminal block screws. (Note: The CN2650I

-8-HV-T

can still operate even if the DC Power Ground wires are

reversed.) The

“Ready” LED will show a solid red color until the system is ready, at

which time it will change to a green color.

Grounding the CN2650I-HV:

Grounding and wire routing help limit the effects of

noise due to electromagnetic interference (EMI). Run

the ground connection from the ground screw to the

grounding surface prior to connecting devices. The

Shielded Ground

(sometimes called Protected

Ground)

contact is the second contact from the right of the 5

pin power terminal

block connector located on the rear panel of the CN2650I

-8-HV-T.

Connect the SG wire to the Earth ground.

- 5 -

Connecting to the Network

Use an Ethernet cable to connect the CN2600 to the Ethernet network.

There are 2 LED indicators located on the top left and right corners of

the Ethernet connector. If the cable is properly connected, the CN2600

will indicate a valid connection to the Ethernet in the following ways:

The top right corner LED indicator maintains a solid green

color when the cable is properly connected to a 100 Mbps

Ethernet network.

The top left corner LED indicator maintains a solid orange

color when the cable is properly connected to a 10 Mbps

Ethernet network.

Connecting to a Serial Device

Connect the serial data cable between the CN2600 and the serial

device.

Connecting to a Console

A console is a combination of keyboard and monitor, and is used to

configure settings and to monitor the status of your system. If you do

not have a network environment, use a terminal, a PC running UNIX, or

a PC with terminal emulation software (e.g., HyperTerminal in

Windows; PComm by Moxa). Use an RJ45-to-DB25 or RJ45-to-DB9

cable to connect the terminal to the console socket. Refer to the

CN2600 User’s Manual for more details.

Software Installation

For the NPort’s configuration, the default IP address of the NPort

is:LAN: Static; IP = 192.168.127.254; netmask = 255.255.255.0

NOTE

If you have forgotten the NPort's IP address, use the Device

Search Utility (DSU) from your PC to locate the NPort. After

searching the LAN for NPort units, the DSU will display the IP

address of each unit.

You may log in with the password moxa to change any setting to meet

your network topology (e.g., IP address) or serial device (e.g., serial

parameters). For first-time use, click the Wizard in the left navigation

panel. The wizard will prompt you to configure the IP address, SSID,

and security mode. For other settings, use the factory defaults or

modify the settings for your application.

For software installation, download the relative utilities from Moxa's

website:

https://www.moxa.com/support/support_home.aspx?isSearchShow=1

•Download the NPort Windows Driver Manager and install it as the

driver to run with Real COM mode of the NPort Series.

•Execute NPort Windows Driver Manager; then map the virtual COM

ports on your Windows platform.

- 6 -

•For Loopback Wiring:

。The NPort with RJ45 Port :

You may refer to the RJ45 Ports pin assignment section to loop

back pin 4 and pin 5 for the RS-232 interface to carry out a self test

on the device.

•。The NPort with DB9 Male Serial Ports:

You may refer to the DB9 Male Ports pin assignment section to loop

back pin 2 and pin 3 for the RS-232 interface to carry out a self test

on the device.

•Use HyperTerminal or a similar program (you may download Moxa's

program, called PComm Lite) to test whether the device is good or

not.

Please refer to the CN600 Async Server User’s Manual for more details.

Pin Assignments and Cable Wiring

10/100BaseTX Port Pinouts

Console Port Pinouts

Signal

Tx+

Tx-

Rx+

Rx-

RS-232

DSR (in)

RTS (out)

GND

TxD (out)

RxD (in)

DCD (in)

CTS (in)

DTR (out)

RJ45 RS

-232/422/485 Port

Pin RS-232 RS-422/

RS-485-4w

RS-485-2w

DSR (in)

–

RTS (out)

TxD+

–

GND

TxD (out)

TxD-

–

RxD (in)

RxD+

Data+

DCD (in)

RxD-

Data-

CTS (in)

–

DTR (out)

–

DB9 (

male) RS-232/422/485 Port

Pin RS-232

RS-422/

RS-485-4w

RS-485-2w

DCD

TxD-(A)

–

RxD

TxD+(B)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

RTS

–

CTS

–

Andere Handbücher für CN2600 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies nport 5400 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2310 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6250 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2510-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort DE-311 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6250 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort P5150A-DB9 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5450A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150 Plus Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik 4000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung