Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

– 1 – – 2 – – 3 –

P/N: 1802056001012

NPort 5600-8-DT

Quick Installation Guide

Third Edition, May 2014

Overview

The NPort 5600-8-DT series includes the following models:

NPort 5610-8-DT: 8 ports, RS-232, DB9

NPort 5610-8-DT-J: 8 ports, RS-232, RJ45

NPort 5650-8-DT: 8 ports, RS-232/422/485, DB9

NPort 5650-8-DT-J: 8 ports, RS-232/422/485, RJ45

NPort 5650I-8-DT: 8 ports, RS-232/422/485, DB9, optical

isolation

Package Checklist

The NPort 5600-8-DT package should contain the following items:

•NPort 5600-8-DT 8-port serial device server

•Power cord and adapter

•DIN rail kit

•NPort documentation and software CD

•NPort 5600-8-DT Quick Installation Guide

Optional Accessories:

DK-35A: DIN rail mounting kit (35 mm)

CBL-RJ45M9-150: 8-pin RJ45 to male DB9 cable, 150 cm

CBL-RJ45F9-150: 8-pin RJ45 to female DB9 cable, 150 cm

CBL-RJ45M25-150: 8-pin RJ45 to male DB25 cable, 150 cm

CBL-RJ45F25-150: 8-pin RJ45 to female DB25 cable, 150 cm

NP21101: DB25-M to DB9-F RS-232 cable, 30 cm

Please notify your sales representative if any of the above items

are missing or damaged.

Hardware Introduction

Top and Rear View

Front View (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT)

Front View (NPort 5610-8-DT-J, 5650-8-DT-J)

Reset Button

The reset button is used to load the factory defaults. Use a pointed

object to hold the reset button down for five seconds. You may

release the reset button when the Ready LED stops blinking.

LED Indicators

The LED indicators on the top panel are used to display status as

follows:

Name

Color

Function

PWR

red

Power is on.

off

Power is off.

Ready green

Steady:

NPort is operational

Blinking:

NPort is responding to NPort

Administrator “Locate”

function

off

Power is off or fault condition exists.

Name

Color

Function

Fault red

IP conflict or DHCP or BOOTP server did

not respond properly.

off

No fault condition detected.

Link

green

Steady:

Network is connected, no data

is being transmitted.

Blinking:

Network is connected, data is

being transmitted.

off Ethernet cable is disconnected or has a

short.

InUse

(P1 to P8)

green

Serial port has been opened by server

side software.

off Serial port is not currently opened by

server side software.

Tx/Rx

(P1 to P8)

green (Tx)

Serial device is transmitting data.

orange (Rx)

Serial device is receiving data.

off

No data is flowing to or from the serial

port.

Hardware Installation

STEP 1: After removing the NPort 5600-8-DT from the box, place

it on a desktop or other horizontal surface. Connect the 12-48 VDC

power adaptor to the NPort 5600-8-DT’s power input when using

an AC power source, or connect the NPort 5600-8-DT’s terminal

block directly to a DC power source.

STEP 2: Use an Ethernet cable to connect the NPort 5600-8-DT to

a network hub or switch. You can also connect directly to your

computer’s Ethernet port, which is convenient for initial

configuration or testing.

STEP 3: Connect the NPort 5600-8-DT’s serial port to a serial

device.

Wall or Cabinet Mounting

The NPort 5600-8-DT comes with two metal attachment plates to

allow installation on a wall or the inside of a cabinet. First, attach

the brackets to the back of the NPort with screws. Next, mount the

unit on a wall or cabinet with screws. Screws should be less than

6.0 mm in head diameter, and less than 3.5 mm in shaft diameter.

DIN Rail Mounting

DIN-rail attachments can be purchased separately to attach the

product to a DIN-rail. The DIN-rail attachments should be oriented

with the metal springs on top.

– 4 – – 5 – – 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

Standard Attachment

DK-35A Attachment

Pull High/Low Resistors for RS-485

Use the set of DIP switches on the bottom panel to set the pull

high/low resistor values for each serial port. To access the

switches, remove the screws holding the DIP switch cover in place

and flip open the cover. There are three DIP switches for each

port’s pull high/low resistors:

Pull High

Pull Low

Terminator

1KΩ

120Ω

Default



OFF

150KΩ

---

Software Installation Information

To install NPort Administration Suite, insert the NPort

Document & Software CD into your PC’s CD-ROM drive. Locate

and run the setup program and follow the on-screen instructions.

The setup program will be named

Npadm_Setup_[Version]_Build_[DateTime].exe (e.g., “Npadm

_Setup_Ver1.8_Build_07041316.exe”). For more information

about NPort Administration Suite, please refer to the NPort

5600-8-DT User’s Manual.

Pin Assignments and Cable Wiring

RJ45 Ports (NPort 5610-8-DT-J, 5650-8-DT-J)

Pin RS-232

RS-422

4-wire RS-485

2-wire

RS-485

DSR

---

RTS

TxD+

---

GND

TxD

TxD-

---

RxD

RxD+

Data+

DCD

RxD-

Data-

CTS

---

DTR

---

Note: The NPort 5610-8-DT-J supports RS-232 only.

DB9 Male Ports (NPort 5610-8-DT, 5650-8-DT, 5650I-8-DT)

Pin RS-232

RS-422

4-wire RS-485

2-wire

RS-485

DCD

TxD-(A)

---

RxD

TxD+(B)

---

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

---

RTS

---

CTS

---

Note: The NPort 5610-8-DT supports RS-232 only.

RS-232 Cables

NPort

erial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

DSR

DTR

RTS

CTS

GND

TxD

RxD

TxD

DCD

CTS

RTS

DTR

DSR

RS-422, 4-wire RS-485 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

TxD+

RxD+

GND

TxD-

RxD-

RxD+

TxD+

RxD-

TxD-

2-wire RS-485 Cables

NPort

Serial

Device

RJ45

DB9(F)

DB9(M)

DB25(M)

DB25(F)

GND

Data+

Data-

Specifications

LAN

Ethernet Ports

2 × 10/100 Mbps (RJ45)

Protection

Built-in 1.5 kV magnetic isolation

Serial Interface

RS-232

NPort 5610-8-DT, 5610-8-DT-J

RS-232/422/485

NPort 5650-8-DT, 5650-8-DT-J,

5650I-8-DT

Serial Ports

8 (DB9-M or RJ45 connectors)

Isolation

2K VDC isolation (NPort 5650I-8-DT)

Serial Signals

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD,

GND

RS-422

Tx+, Tx-, Rx+, Rx-, GND

RS-485 (2-wire)

Data+, Data-, GND

RS-485 (4-wire)

Tx+, Tx-, Rx+, Rx-, GND

Serial Line Protection

15KV ESD for all signals

RS-485 Data Direction

ADDC™ (Automatic Data Direction

Control)

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data Bits

5, 6, 7, 8

Stop Bit(s)

1, 1.5, 2

Flow Control RTS/CTS, DSR/DTR (for RS-232 only),

XON/XOFF

Transmission Speed

50 bps to 921.6 Kbps

Power Requirements

Power Input

12 to 48 VDC

Mechanical

Operating Temperature

0 to 55°C (32 to 131°F), 5 to 95% RH

Storage Temperature

-20 to 70°C (-4 to 185°F), 5 to 95% RH

Material

SECC sheet metal (0.8 mm)

Dimensions (W × D × H)

197 × 44 × 125 mm

With wall-mount:

229 × 46 × 125 mm

With DIN-rail kit:

197 × 52.8 × 125 mm

Power Line Protection

2 KV Surge, EN61000-4-5

Certifications

Regulatory Approvals

FCC Class A, CE Class A, UL, CUL, LVD

Warranty

5 years

Andere Handbücher für NPort 5600-8-DT

Inhaltsverzeichnis

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies NPORT 6600 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies VPort 2110 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6150 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5210A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6650 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Handbuch

Moxa Technologies

Moxa Technologies 2140 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 6450 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-16/8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5450A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5100A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8455I Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort S8000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik W5300 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5000A Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung