Moxa Technologies NPort W2150 Plus Bedienungsanleitung

– 4 – – 5 –

– 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

NPort W2150/2250 Plus Series

Quick Installation Guide

Fourth Edition, July 2012

1. Overview

The NPort W2150/2250 Plus wireless device servers are an ideal

choice for connecting serial devices such as PLCs, meters, and

sensors to an IP-based wireless LAN or Ethernet LAN.

Features

•Link any serial device to an IEEE 802.11a/b/g network.

•1 and 2-port RS-232/422/485 models, up to 921.6 Kbps.

•Web-based configuration over Ethernet or wireless LAN.

•Enhanced security for remote configuration with HTTPS, SSH.

•Secure data access with WEP, WPA, WPA2.

•Built-in WLAN site survey tool.

•Wireless roaming when signal strength goes below

user-defined roaming threshold.

•Per-port offline port buffering and serial data log.

•Dual power inputs via power jack and terminal block.

2. Package Checklist

Before installing the NPort W2150/2250 Plus device server, verify

that the package contains the following items:

•1 NPort W2150 Plus, NPort W2150 Plus-T, NPort W2250 Plus,

or NPort W2250 Plus-T.

•Document and Software CD.

•RJ45 to RJ45 cross-over Ethernet cable.

•Power adaptor (not including wide temperature models).

•Warranty Statement.

•Quick Installation Guide.

Optional Accessories

•DK-35A (35 mm DIN-Rail Mounting Kit).

•Power jack to terminal block power cable (P/N:

9199000000900).

Note: Notify your sales representative if any of the above items are

missing or damaged.

3. Hardware Introduction

The NPort W2150 Plus models have one serial port, and the NPort

W2250 Plus models have two serial ports. All models support

RS-232/422/485 operation with 8-pin RJ45 connectors, and

include one 10/100M Ethernet port.

NPort W2150 Plus/

NPort W2150 Plus-T

NPort W2250 Plus/

NPort W2250 Plus-T

Reset Button—The reset button is used to load factory default

settings. Use a pointed object to hold the reset button down for 5

seconds to load factory defaults.

End Panel LED Indicators

Name

Color

Function

Ethernet

Orange

10 Mbps Ethernet connection

Green

100 Mbps Ethernet connection

Off

Ethernet cable is disconnected, or has a short

Top Panel LED Indicators

Name

Color

Function

Ready

Red

Steady on:

Power is on and NPort is booting

Blinking:

IP conflict or DHCP/BOOTP server

did not respond properly

Green

Steady on:

NPort is functioning normally

Blinking:

NPort is responding to Locate

function

Off

Power is off or a power error condition exists

WLAN Green

Steady on: Wireless enabled

Blinking:

WLAN IP conflict or DHCP/BOOTP

server did not respond properly

Serial 1

Serial 2

Orange

Serial port is receiving data

Green

Serial port is transmitting data

Off

No data is flowing to or from the serial port

Signal

Strength

Red

1 Red - the signal strength is between 0% ~

20%

2 Red -

the signal strength is between 20% ~

40%

Green

3 Green - the signal strength is between

40%~60%

4 Green - the signal strength is between

60%~80%

5 Green - the signal strength is between

80%~100%

4. Pull High/Low Resistors for RS-422/485

You may need to set the pull high/low resistors when termination

resistors are used for certain RS-422 or RS-485 environments.

NPort W2150 Plus/

NPort W2150 Plus-T

NPort W2250 Plus/

NPort W2250 Plus-T

Serial Port

Jumpers

Pull High/Low Setting

Port 1 JP5 and JP6 150 KΩ=both open,

1 KΩ=both shorted

Port 2 * JP7 and JP8

150 KΩ=both open,

1 KΩ=both shorted

– 4 – – 5 –

– 6 –

www.moxa.com/support

The Americas:

+1-714-528-6777 (toll-free: 1-888-669-2872)

Europe:

+49-89-3 70 03 99-0

Asia-Pacific:

+886-2-8919-1230

China:

+86-21-5258-9955 (toll-free: 800-820-5036)

* NPort W2250 Plus Series only

NOTE

Do not use the 1 KΩ setting while in RS-232 mode. Doing

so will degrade the

RS-

232 signals and reduce the effective

communication distance.

5. First-time Hardware Installation

STEP 1:

After removing the NPort W2150/2250 Plus from the box,

use a cross-over Ethernet cable to connect the NPort’s

RJ45 Ethernet port directly to your computer’s Ethernet

port.

STEP 2:

Attach the power adaptor to the NPort and then plug the

adaptor into an electrical outlet.

STEP 3:

Configure the NPort W2150/2250 Plus through the

Ethernet port. See the next section for software

installation information.

NOTE

You must connect the Ethernet cable first before powering

up your NPort.

6. Software Installation Information

Insert the Document & Software CD into your PC. A window should

open with several options displayed:

•Click [Install COM Driver]and follow the on-screen

instructions to install the COM drivers.

•Click [Documents]and select “NPort W2150/2250 Plus

Series User’s Manual” to view the user’s manual.

•Click [Install UTILITY]and follow the on-screen instructions

to install the NPort Search Utility. This utility can be used to

search for NPort W2150/2250 Plus units on the network.

7. Setting the IP Address

The factory default IP settings are assigned as follows:

LAN: Static; IP = 192.168.126.254; netmask = 255.255.255.0

WLAN Static; IP = 192.168.127.254; netmask = 255.255.255.0

If the NPort is configured for DHCP but the DHCP server cannot be

found, the NPort will use factory default IP settings.

NOTE

If you have forgotten the NPort’s IP address, use the NPort

Search Utility from your PC to locate the NPort. After

searching the LAN for NPort units, the NPort Search Utility

will display the IP address of each unit.

NOTE

Only one network interface can be active at a time. If the

Ethernet link is active, the WLAN will be inactive. If the

WLAN is active, the Ethernet link will be inactive.

Open the web console to make configuration changes as follows:

STEP 1:

Open your web browser.

STEP 2:

In the address bar, enter 192.168.126.254 (the default

IP address).

STEP 3:

The web console will open, and the current configuration

settings will be displayed.

STEP 4:

For first time users, click the Wizard in the left navigation

panel. The wizard will prompt

you to configure the IP

address, SSID, and security mode. For other settings,

use the factory defaults or modify the settings for your

application.

8. Pin Assignments and Cable Wiring

Pin RS-232

RS-422,

4w RS-485

2w RS-485

DCD

TxD-(A)

---

RXD

TxD+(B)

---

TXD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

---

RTS

---

CTS

---

DB9-to-DB25 cables are available as optional accessories for

connecting the NPort W2150/2250 Plus to RS-232 serial devices.

The cable wiring diagrams are shown below. Female-to-female

versions are also available.

Female DB9 to Male DB9

Female DB9 to Male DB25

9. Specifications

Power Requirements

Power Input

12 to 48 VDC

Power Consumption

560 mA

Power Connector

Power jack and terminal block

Physical Characteristics

Material

Aluminum sheet metal (1 mm)

Dimensions

77 × 111 × 26 mm (no ears, no antenna)

100 × 111 × 26 mm

(with ears, no antenna)

Antenna Length

109 mm

Magnetic Isolation

1.5 KV magnetic isolation built-in

Environmental Limits

Operating Temperature

Standard Model

0 to 55°C (32 to 131°F), 5 to 95%RH

Wide Temp. Model

-40 to 75°C (-40 to 167°F), 5 to 95%RH

Storage Temperature

-20 to 85°C (-4 to 185°F), 5 to 95%RH

Regulatory Approvals

EMC

CE:

EN55022 Class A/EN55024

ETSI EN 301 489-17,

ETSI EN 301 489-1

FCC:

FCC Part 17 Subpart B, Class A

FCC Part 15 Subpart B, Class A

EMS

IEC 61000-4-2 (ESD) Level 3

Safety

UL:

UL60950-1

TÜV:

EN60950-1

DSPR: ARIB-STD 33, ARIB-STD 66

Andere Handbücher für NPort W2150 Plus

Dieses Handbuch passt für folgende Modelle

Andere Moxa Technologies Server Handbücher

Moxa Technologies

Moxa Technologies EtherDevice Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2150A Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A-T-EU Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5610-8-DT Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPORT 6600 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort W2250A Bedienungsanleitung

Moxa Technologies

Moxa Technologies 5400 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort Express DE-211 Handbuch

Moxa Technologies

Moxa Technologies NPort 5000AI-M12 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies CN2610-8 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5600-8-DTL Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort 5410 Bedienungsanleitung

Moxa Technologies

Moxa Technologies MIINEPORT E1 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung