Moxa Technologies ToughNet TN-5816A Series Bedienungsanleitung

P/N: 1802058000011

*1802058000011*

TN-5816A/5818A

Quick Installation Guide

Moxa ToughNet Switch

Edition 2.0, February 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The ToughNet TN-5816A/5818A switches are high performance M12

Layer 3 Ethernet switches that support Layer 3 routing functionality to

facilitate the deployment of applications across networks.

TN-5816A/5818A switches use M12 and other circular connectors to

ensure tight, robust connections and guarantee reliable operation against

environmental disturbances, such as vibration and shock.

TN-5816A/5818A switches support isolated power in the 24 to 110 VDC

power input range, allowing the same model to be used at different sites

around the globe. TN-5816A/5818A switches provide up to 16 Fast

Ethernet M12 ports with 2 bypass relay ports, and 2 Ethernet interface

Gigabit ports with bypass relay functionality. Furthermore, with a -40 to

75°C operating temperature and IP54-rated waterproof enclosure, the

switches can be deployed in harsh environments. The TN-5816A/5818A

series Ethernet switches are compliant with mandatory sections of EN

50155, covering operating temperature, power input voltage, surge, ESD,

and vibration, as well as conformal coating and power insulation, making

the switches suitable for a variety of industrial applications.

Package Checklist

Your ToughNet TN-5816A/5818A switch is shipped with the following

items. If any of these items is missing or damaged, please contact your

customer service representative for assistance.

•1 Moxa ToughNet switch

•M12 to DB9 console port cable

•2 protective caps for console and relay output ports

•Panel mounting kit

•CD-ROM with user’s manual, Windows utility, and SNMP MIB file

•Quick installation guide (printed)

•Warranty card

Features

Anti-Vibration Circular Connectors for Robust Links

•M12 D-coding 4-pin female connectors for Fast Ethernet

10/100BaseT(X) ports.

•M12 X-coded 8-pin connector for Gigabit Ethernet

10/100/1000BaseT(X) ports

•M12 A-coding 5-pin male connectors for console and relay output.

•M23 6-pin male connector for power input.

Dual Isolated Power Inputs

•24 to 110 VDC (16.8 to 137.5 VDC), isolated.

Designed for Industry-specific Applications

•Two Gigabit Ethernet ports to meet high bandwidth requirements.

•Bypass relay ensures non-stop data communication in the event the

switch stops working due to a power failure.

•Complies with all EN 50155 mandatory test items*.

•-40 to 75°C operating temperature range.

•IP54, rugged high-strength case.

•Panel mounting or DIN-rail mounting installation capability.

*This product is suitable for rolling stock railway applications, as defined

by the EN 50155 standard. For a more detailed statement, click here:

www.moxa.com/doc/specs/EN_50155_Compliance.pdf

- 3 -

Recommended Optional Accessories

•CBL-M23(FF6P)Open-BK-100-IP67: 1-meter M23 to 6-pin power

cable with IP67-rated female 6-pin M23 connector

•CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP

Ethernet cable with IP67-rated male 4-pin M12 D-coded connector

•CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable

with IP67-rated female 5-pin M12 A-coded connector

•M12D-4P-IP68: Field-installable M12 D-coded screw-in connector,

male 4-pin, IP68-rated

•M12A-5P-IP68: Field-installable M12 A-coded screw-in connector,

female 5-pin, IP68-rated

•CAP-M12F-M: Metal cap for M12 female connector

•DK-DC50131: DIN-rail mounting kit, 50 x 131 mm

- 4 -

TN-5816A Panel Layouts

1. Model name

2. Screw holes for panel mounting kit

3. Console port

4. Grounding screw

5. Relay output port

6. Power input voltage range indicator

7. Power input port (male 6-pin shielded M23 connector)

8. PWR1 LED: for power input 1

9. PWR2 LED: for power input 2

10.

FAULT LED

11.

MSTR/HEAD LED: for ring master or chain head

12.

CPLR/TAIL LED: for ring coupler or chain tail

13.

TP port’s 10/100 Mbps LED

14.

10/100BaseT(X) port (female 4-

pin shielded M12 connector with D

coding)

15.

Waterproof vent

16.

Product label

17.

12 screw holes for DIN-rail mounting kit

18.

E2 LED: Not used by the TN-5816 series

19.

E1 LED: Not used by the TN-5816 series

20. Ports 9-10, 13-14 with relay bypass function

- 5 -

TN-5818A Panel Layouts

Model name

2. Screw holes for panel mounting kit

3. Console port

4. Grounding screw

5. Relay output port

6. Power input voltage range indicator

7. Power input port (male 5-pin shielded M23 connector)

8. PWR1 LED: for power input 1

9. PWR2 LED: for power input 2

10.

FAULT LED

11.

MSTR/HEAD LED: for ring master or chain head

12.

CPLR/TAIL LED: for ring coupler or chain tail

13.

TP port’s 10/100 Mbps LED

14.

10/100BaseT(X) port (female 4-

pin shielded M12 connector with D

coding)

15.

Waterproof vent

16.

Product label

17.

12 screw holes for DIN-rail mounting kit

18. E2 LED: Down-side E2 Gigabit port’s 10/100/1000 Mbps LED

- 6 -

19. E1 LED: Down-side E1 Gigabit port’s 10/100/1000 Mbps LED

20.

Gigabit Ethernet port E1 (corresponding to port 17 in the TN-5818

User's Manual; ports 17-18 support relay bypass function)

21.

Gigabit Ethernet port E2 (corresponding to port 18 in the TN-5818

User’s Manual; ports 17-18 support relay bypass function)

22. Ports 9-10, 13-14 with relay bypass function

ATTENTION

DO NOT open or remove the vent (#15). Once the seal has been

removed, the warranty will be invalid.

Ports (including 3, 5, and 14) that are not in use must be tightly

covered with protective caps (an optional accessory) to ensure

IP54/IP67

-rated protection.

After the rotary switches (1) are set, the protective cover must be

properly affixed to ensure IP54-rated protection.

Mounting Dimensions (unit = mm)

TN-5816A Series

- 7 -

TN-5818A Series

Panel/Wall Mounting

STEP 1:

Mounting the TN-5816A/5818A to a wall requires 4 screws. Use the

ToughNet switch as a guide to mark the correct positions of the 4 screws.

STEP 2:

se the 4 screws in the panel mounting kit. If you

would like to use your own screws, make sure the

screw head

is between 6.0 mm and 7.0 mm in

diameter and the shaft

is less than 4.0 mm in

diameter, as shown

at the right.

Do not screw the screws in all the way—leave a space of about 2 mm to

allow room for sliding the ToughNet switch between the wall and the

screws.

- 8 -

NOTE

Before tightening the screws into the wall, make sure the screw

head and shaft size are suitable by inserting the screw through

one of the keyhole-shaped apertures of the ToughNet switch.

STEP 3:

Once the screws are fixed in the wall, hang the ToughNet switch on the 4

screws through the large opening of the keyhole-shaped apertures, and

then slide the switch downwards. Tighten the four screws for added

stability.

NOTE

To provide greater protection from vibrations and shocks, use

screws with shaft diameter between 6.0 mm and 7.0 mm, and fix

the ToughNet switch onto the wall directly through the large

opening of the keyhole-shaped apertures.

DIN-Rail Mounting (optional)

Use

the optional DIN-rail mounting

kit

(DK-DC50131, must be

purchased separately)

mount the

-5816A/5818A on a 35 mm

DIN

-rail.

STEP 1:

Use 12 screws (6 screws

per plate) to attach the two DIN

-r

ail

attachment plates to the rear panel

of the switch.

STEP 2: If the spring-loaded bracket is locked in place, push the recessed

button to release it. Once released, you should feel some resistance from

the spring as you slide the bracket up and down a few millimeters in each

direction.

STEP 3: Position the ToughNet

switch on the DIN

-rail, tilted so the

clamps hook over the top edge of the

rail.

STEP 4: Swing the switch down

fully onto the DIN-rail, until both

clamps completely latch.

- 9 -

To remove the Moxa ToughNet Switch from

the DIN

-rail, use a screw

driver to pull out the

two spring

loaded brackets from the bottom

until they are fix

ed in a “locked” position.

Then

, reverse Steps 3 and 4 above.

Wiring Requirements

WARNING

Turn the pow

er off before disconnecting modules or wires. The

correct power supply voltage is listed on the product label. Check

the voltage of your power source to make sure you are using the

correct voltage. Do NOT use a voltage greater than what is

specified on the

product label.

These devices must be supplied by a SELV source as defined in

the Low Voltage Directive 2006/95/EC and 2004/108/EC.

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wir

ing your Moxa switch.

This device has UL

508 approval. Use copper conductors only,

to 75°C

, and tighten to 4.5 pound-inches. For use in pollution

degree 2 environments.

ATTENTION

Safety First!

Observe all electrical co

des dictating the maximum current

allowable for each wire size. If the current

goes above the

maximum ratings, the wiring could overheat,

causing serious

damage to your equipment.

- 10 -

Please Read and Follow These Guidelines:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring

through the same wire conduit. To avoid interference, wires with

different signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

•Keep input wiring and output wiring separated.

•It is strongly advised that you label wiring for all devices in the system

when necessary.

Grounding the ToughNet Switch

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

grounding screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface such as a metal panel.

Connecting the Power Supplies

The ToughNet TN-5816A/5818A series switches support two sets of

power supplies—power input 1 and power input 2. The M23 6-pin male

connector on the TN-5816A/5818A’s front panel is used for the dual

power inputs.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxa Technologies Schalten Handbücher

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A-T Handbuch

Moxa Technologies

Moxa Technologies TN-5510A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-518A Series Handbuch

Moxa Technologies

Moxa Technologies EDS-G4014 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-P206A-4PoE-SS-SC Handbuch

Moxa Technologies

Moxa Technologies S9450I Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-G508E-T Handbuch

Moxa Technologies

Moxa Technologies EDS-510E Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Switch EDS-G205 Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-516A-T Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-P206A-4PoE Series Handbuch

Moxa Technologies

Moxa Technologies EDS-600 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-5508A Series Handbuch

Moxa Technologies

Moxa Technologies NPort S8000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-G6524A Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-405A/408A Series Handbuch

Moxa Technologies

Moxa Technologies MDS-G4000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-G308-T Handbuch

Moxa Technologies

Moxa Technologies PT-7528 Bedienungsanleitung

Moxa Technologies

Moxa Technologies TN-4516A non-PoE series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PowerTrans PT-508-MM-ST-48 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-G205-T Handbuch

Moxa Technologies

Moxa Technologies IEX-408E-2VDSL2 series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch