Moxa Technologies EtherDevice Bedienungsanleitung
Moxa EtherDevice™ Switch
EDS-728 Series User’s Manual
www.moxa.com/product
First Edition, January 2008
Moxa Inc.
Tel: +886-2-8919-1230
Fax: +886-2-8919-1231
Web: www.moxa.com
Moxa Technical Support
Worldwide: support@moxa.com
The Americas support@usa.moxa.com
Moxa EtherDevice™ Switch
EDS-728 Series User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in
accordance with the terms of that agreement.
Copyright Notice
Copyright ©2008 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
MOXA is a registered trademark of the Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the
part of Moxa.
Moxa provides this document “as is,” without warranty of any kind, either expressed or implied, including, but
not limited to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this
manual, or to the products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no
responsibility for its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the
publication.
Table of Contents
Chapter 1 Introduction ...............................................................................................1-1
Overview .............................................................................................................................. 1-2
Package Checklist................................................................................................................. 1-2
Features ................................................................................................................................ 1-2
Industrial Networking Capability .............................................................................. 1-2
Designed for Industrial Applications......................................................................... 1-2
Useful Utility and Remote Configuration ................................................................. 1-3
Recommended Software and Accessories................................................................. 1-3
Chapter 2 Getting Started ..........................................................................................2-1
RS-232 Console Configuration (115200, None, 8, 1, VT100) ............................................. 2-2
Configuration by Telnet Console.......................................................................................... 2-5
Configuration by Web Browser ............................................................................................ 2-6
Disabling Telnet and Browser Access .................................................................................. 2-8
Chapter 3 Featured Functions...................................................................................3-1
Overview .............................................................................................................................. 3-2
Configuring Basic Settings................................................................................................... 3-2
System Identification................................................................................................. 3-2
Password ................................................................................................................... 3-3
Accessible IP............................................................................................................. 3-5
Port ............................................................................................................................3-6
Network..................................................................................................................... 3-7
Time .......................................................................................................................... 3-9
System File Update—By Remote TFTP ................................................................. 3-10
System File Update—By Local Import/Export....................................................... 3-12
System File Update—By Backup Media ................................................................ 3-12
Restart ..................................................................................................................... 3-13
Factory Default........................................................................................................ 3-13
Using Port Trunking ........................................................................................................... 3-14
The Port Trunking Concept..................................................................................... 3-14
Configuring Port Trunking...................................................................................... 3-15
Configuring SNMP............................................................................................................. 3-17
SNMP Read/Write Settings..................................................................................... 3-18
Trap Settings ........................................................................................................... 3-19
Private MIB information ......................................................................................... 3-19
Using Communication Redundancy ................................................................................... 3-20
Gigabit Ethernet Redundant Ring Capability (< 50 ms) ......................................... 3-20
The Turbo Ring Concept......................................................................................... 3-21
Configuring “Turbo Ring” and “Turbo Ring V2”................................................... 3-25
The STP/RSTP Concept.......................................................................................... 3-29
Configuring STP/RSTP........................................................................................... 3-31
Using Traffic Prioritization................................................................................................. 3-33
The Traffic Prioritization Concept .......................................................................... 3-33
Configuring Traffic Prioritization ........................................................................... 3-36
Using Virtual LAN ............................................................................................................. 3-38
The Virtual LAN (VLAN) Concept ........................................................................ 3-39
Sample Applications of VLANs using the EDS-728 .............................................. 3-41
Configuring 802.1Q VLAN .................................................................................... 3-42
Using Multicast Filtering.................................................................................................... 3-43
The Concept of Multicast Filtering ......................................................................... 3-44
Configuring IGMP Snooping .................................................................................. 3-47
Add Static Multicast MAC...................................................................................... 3-48
Configuring GMRP ................................................................................................. 3-49
Multicast Filtering Behavior ................................................................................... 3-50
Using Bandwidth Management .......................................................................................... 3-51
Configuring Bandwidth Management ..................................................................... 3-51
Using Port Access Control.................................................................................................. 3-52
Configuring IEEE 802.1X....................................................................................... 3-54
Static Port Lock....................................................................................................... 3-57
Using IP Filter .................................................................................................................... 3-58
Using Auto Warning ........................................................................................................... 3-58
Configuring Email Warning.................................................................................... 3-58
Email Alarm Events Settings .................................................................................. 3-59
Email Settings ......................................................................................................... 3-60
Configuring Relay Warning .................................................................................... 3-61
Relay Alarm Events Settings................................................................................... 3-62
Relay Alarm List ..................................................................................................... 3-63
Using Line-Swap-Fast-Recovery........................................................................................ 3-63
Configuring Line-Swap Fast Recovery................................................................... 3-63
Using Set Device IP............................................................................................................ 3-64
Configuring Set Device IP ...................................................................................... 3-65
Using Diagnosis.................................................................................................................. 3-65
Mirror Port .............................................................................................................. 3-65
Ping ......................................................................................................................... 3-66
Using Monitor .................................................................................................................... 3-67
Monitor by Switch................................................................................................... 3-67
Monitor by Port ....................................................................................................... 3-67
Using the MAC Address Table ........................................................................................... 3-68
Using System Log .............................................................................................................. 3-69
Event Log ................................................................................................................ 3-69
Syslog Settings ........................................................................................................ 3-70
Using HTTPS/SSL ............................................................................................................. 3-71
Chapter 4 EDS Configurator GUI...............................................................................4-1
Starting EDS Configurator ................................................................................................... 4-2
Broadcast Search .................................................................................................................. 4-2
Search by IP address............................................................................................................. 4-3
Upgrade Firmware................................................................................................................4-3
Modify IP Address................................................................................................................ 4-4
Export Configuration............................................................................................................4-5
Import Configuration............................................................................................................4-6
Unlock Server....................................................................................................................... 4-7
Appendix A MIB Groups...............................................................................................A-1
1
1
Chapter 1 Introduction
Welcome to the Moxa EtherDevice Switch EDS-728 Series, the modular managed Gigabit
Ethernet Switch designed especially for connecting Ethernet-enabled devices in industrial field
applications.
The following topics are covered in this chapter:
Overview
Package Checklist
Features
EDS-728 Series User’s Manual Introduction
1-2
Overview
Network planning is easy and flexible with the EDS-728, which has a modular design that lets you
install up to 4 Gigabit ports and 24 fast Ethernet ports in one switch. Choose from two 2-port
Gigabit modules with copper or fiber optic connectors, and eight 4-port Fast Ethernet modules
with copper or fiber optic (SC/ST) connectors. The EDS-728 is suitable for any industrial
application, and leaves room for future expansion. Features include an angled LED display for
convenient viewing from any vertical angle, pluggable ABC-01 for configuration back-up,
network redundancy, and intelligent network management. The EDS-728 provides more flexibility,
reliability, and application-oriented functions to meet the demands of any harsh industrial
application.
Package Checklist
Moxa’s EDS-728 is shipped with the following items. If any of these items is missing or damaged,
please contact your customer service representative for assistance.
y1 Moxa EDS-728 modular switch system or Interface Module
yHardware Installation Guide
yCD-ROM with User’s Manual and Windows Utility (for EDS-728 modular switch system
only)
yMoxa Product Warranty booklet
yRJ45 to DB9 Console port cable
NOTE: Please notify your Moxa sales representative if any of the above items is missing or
damaged.
Features
Industrial Networking Capability
yRedundant Gigabit Ethernet Ring Capability (recovery time < 50 ms at full load)
yRedundant Turbo Ring V2 Capability (recovery time < 20 ms at full load)
yIGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet Protocols
ySupports IEEE 802.1Q VLAN and GVRP protocol to ease network planning
ySupports QoS—IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
ySupports 802.3ad, LACP for optimum bandwidth utilization
ySupports IEEE 802.1X and SSL to enhance network security
ySNMP V1/V2C/V3 for different levels of network management security
Designed for Industrial Applications
yModular Managed Switch with up to 26 ports. Choose from the following modules:
¾Two 2-port Gigabit modules, with 10/100/1000BaseT(X) (RJ45 connector), or
1000BaseSX/LX (SC connector)
¾Eight 4-port fast Ethernet Modules with a combination of 10/100BaseT(X) (RJ45
connectors) and 100BaseFX (Single/Multimode, SC/ST connectors)
yACB-01 (optional kit) support for loading or saving configurations
yLong-haul transmission distance of 40 km or 80 km
yRedundant, dual DC power inputs
yIP 30, rugged high-strength metal case
EDS-728 Series User’s Manual Introduction
1-3
yDIN-Rail or panel mounting ability
yBandwidth management to prevent unpredictable network status
yLock port for authorized MAC address access only
yPort mirroring for online debugging
yAutomatic warning by exception through email, relay output
yDigital inputs to integrate a sensor and alarm with an IP network
yAutomatic recovery of connected device IP addresses
yLine-swap fast recovery
Useful Utility and Remote Configuration
yConfigurable by Web browser, Telnet/Serial console, Windows utility
ySend ping commands to identify network segment integrity
Recommended Software and Accessories
yEDS-SNMP OPC Server Pro
yDR-4524, DR-75-24, DR-120-24 DIN-Rail 24 VDC Power Supply Series
yWK-32: Wall Mounting Kit
yABC-01 (Auto Backup Configurator): RJ-type RS-232 backup configurator
2
2
Chapter 2 Getting Started
This chapter explains how to access the EDS-728 for the first time. There are three ways to access
the switch: serial console, Telnet console, and web browser. The serial console connection method,
which requires using a short serial cable to connect the EDS-728 to a PC’s COM port, can be used
if you do not know the EDS-728’s IP address. The Telnet console and web browser connection
methods can be used to access the EDS-728 over an Ethernet LAN, or over the Internet.
The following topics are covered:
RS-232 Console Configuration (115200, None, 8, 1, VT100)
Configuration by Telnet Console
Configuration by Web Browser
Disabling Telnet and Browser Access
EDS-728 Series User’s Manual Getting Started
2-2
RS-232 Console Configuration (115200, None, 8, 1, VT100)
NOTE Connection Caution!
1. You cannot connect to the EDS-728 simultaneously by serial console and Telnet.
2. You can connect to the EDS-728 simultaneously by web browser and serial console, or by
web browser and Telnet.
However, we strongly suggest that you do NOT use more than one connection method at the
same time. Following this advice will allow you to maintain better control over the
configuration of your EDS-728.
NOTE We recommend using Moxa PComm Terminal Emulator, which can be downloaded free of
charge from Moxa’s website.
Before running PComm Terminal Emulator, use an RJ45 to DB9-F (or RJ45 to DB25-F) cable to
connect the EDS-728’s RS-232 Console port to your PC’s COM port (generally COM1 or COM2,
depending on how your system is set up).
After installing PComm Terminal Emulator, take the following steps to access the RS-232 Console
utility.
1. From the Windows desktop, click on Start ÆPrograms ÆPCommLite2.5 ÆTerminal
Emulator.
2. Select Open under Port Manager to open a new connection.
EDS-728 Series User’s Manual Getting Started
2-3
3. The Communication Parameter page of the Property window opens. Select the appropriate
COM port for Console Connection, 115200 for Baud Rate, 8for Data Bits, None for Parity,
and 1for Stop Bits.
4. Click on the Terminal tab, and select VT100 for Terminal Type. Click on OK to continue.
5. Type 1to select ansi/VT100 terminal type, and then press Enter.
Andere Handbücher für EtherDevice
3
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Moxa Technologies Schalten Handbücher
Moxa Technologies
Moxa Technologies EDS-2005-ELP Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies PT-7828 Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies ToughNet TN-5516 Series Handbuch
Moxa Technologies
Moxa Technologies ThinkCore DA-660-8-CE Bedienungsanleitung
Moxa Technologies
Moxa Technologies EtherDevice EDS-G205-T Handbuch
Moxa Technologies
Moxa Technologies EDS-G4008 Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies EtherDevice EDS-405A/408A Series Handbuch
Moxa Technologies
Moxa Technologies EtherDevice EDS-2016-ML Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies EtherDevice EDS-828 Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies EtherDevice EDS-510A Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies PT-508 Series Handbuch
Moxa Technologies
Moxa Technologies ioLogik E1200 Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies EDS-G205-1GTXSFP-T Handbuch
Moxa Technologies
Moxa Technologies EtherDevice EDS-510A-3GT Handbuch
Moxa Technologies
Moxa Technologies EtherDevice EDS-305-T Handbuch
Moxa Technologies
Moxa Technologies ToughNet TN-4500A Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies EtherDevice EDS-728 Series Handbuch
Moxa Technologies
Moxa Technologies RKS-G4028 Series Bedienungsanleitung
Moxa Technologies
Moxa Technologies EtherDevice EDS-405A-PN Bedienungsanleitung
Moxa Technologies
Moxa Technologies PT-7528 Handbuch
