Moxa Technologies AirWorks AWK-3131-M12-RCC Bedienungsanleitung

P/N: 1802031310031

AWK-3131-M12-RCC

Quick Installation Guide

Moxa AirWorks

Second Edition, September 2014

www.ipc2u.ru

www.moxa.pro

- 2 -

Overview

Moxa’s new AWK-3131-M12-RCC is a 3-in-1 industrial AP/bridge/client

device designed specifically for rail carriage-to-carriage communication

and can provide up to 300 Mbps with IEEE 802.11n technology. The

AWK-3131-M12-RCC combines two adjacent 20 MHz channels into a

single 40 MHz channel to deliver a potent combination of greater

reliability and more bandwidth. The two redundant DC power inputs

increase the reliability of the power supply, and the AWK-3131-M12-RCC

can be powered via PoE to make deployment easier. The

AWK-3131-M12-RCC can operate on either the 2.4 or 5 GHz bands and is

backward-compatible with existing 802.11a/b/g deployments to

future-proof your wireless investments.

Package Checklist

Moxa’s AWK-3131-M12-RCC is shipped with the following items. If any of

these items is missing or damaged, please contact your customer service

representative for assistance.

•AWK-3131-M12-RCC

•Cable holder with one screw

•2 plastic RJ45 protective caps for Console port

•DIN-rail kit

•Documentation and software CD

•Quick installation guide (printed)

•Warranty card

NOTE

Antennas are not included and should be purchased separately.

The AWK is certified with 2dBi omni

-directional antennas with

QMA to RP-SMA adaptors.

Installation and Configuration

Before installing the AWK-3131-M12-RCC, make sure that all items in the

Package Checklist are in the box. In addition, you will need access to a

notebook computer or PC equipped with an Ethernet port. The

AWK-3131-M12-RCC has a default IP address that you must use when

connecting to the device for the first time.

Step 1: Select the power source

The AWK-3131-M12-RCC can be powered by a DC power input or PoE

(Power over Ethernet). The AWK-3131-M12-RCC will use whichever

power source you choose.

Step 2: Connect the AWK-3131-M12-RCC to a notebook or

Since the AWK-3131-M12-RCC supports MDI/MDI-X auto-sensing, you

can use either a straight-through cable or crossover cable to connect the

AWK-3131-M12-RCC to a computer. If the LAN LED indicator on the

AWK-3131-M12-RCC port lights up, it means the connection is

established.

www.ipc2u.ru

www.moxa.pro

- 3 -

Step 3: Set up the computer’s IP address

Set an IP address on the same subnet as the AWK-3131-M12-RCC. Since

the AWK-3131-M12-RCC’s default IP address is 192.168.127.253, and

the subnet mask is 255.255.255.0, you should set the IP address of the

computer to 192.168.127.xxx and subnet mask to 255.255.255.0.

Step 4: Use the web-based manager to configure

AWK-3131-M12-RCC

Open your computer’s web browser and then type

http://192.168.127.253 in the address field to access the homepage

of the web-based management. Before the homepage opens, you will

need to enter the user name and password. For first-time configuration,

enter the default user name and password and then click on the Login

button:

Username: admin

Password: root

ATTENTION

For security reasons, we strongly recommend changing the

password. To do so,

select Maintenance



Password

, and then

follow the on-screen instructions.

Step 5: Select the operation mode for the

AWK-3131-M12-RCC

By default, the AWK-3131-M12-RCC’s operation mode is set to AP. You

can change the setting in Wireless Settings Basic Wireless

Settings if you would like to use the Client mode.

NOTE

To make the change effective, you must click Save Configuration

to save the change or

the Save and Restart button to apply all

changes.

www.ipc2u.ru

www.moxa.pro

- 4 -

Panel Layout of the AWK-3131-M12-RCC

1. Grounding screw (M3)

Terminal block for PWR1, PWR2,

relay, DI1, and DI2

3. Reset button

4. A antenna connector

5. B antenna connector

6. System LEDs: PWR1, PWR2,

PoE, FAULT, and STATE

7. Signal strength indicator

8. WLAN and LAN LEDs

9. RS-232 console port

10.

M12 LAN Port:

10/100/1000BaseT(X)

11.

Model name

12.

Screw holes for wall mounting

kit

13.

DIN-Rail mounting kit

www.ipc2u.ru

www.moxa.pro

- 5 -

Mounting Dimensions (unit = mm)

DIN-Rail Mounting

The aluminum DIN-Rail attachment plate should be fixed to the back

panel of the AWK-3131-M12-RCC when you take it out of the box. If you

need to reattach the DIN-Rail attachment plate to the

AWK-3131-M12-RCC, make sure the stiff metal spring is situated towards

the top, as shown in the figures below.

STEP 1:

Insert the top of the DIN

-Rail into

the slot just

below the stiff metal

spring.

STEP 2:

The DIN

-Rail attachment unit will

snap into place as shown below.

To remove the AWK-3131-M12-RCC from the DIN-Rail, simply reverse

Steps 1 and 2.

www.ipc2u.ru

www.moxa.pro

- 6 -

Wall Mounting (optional)

For transportation applications that require an EN 50155 certification

report, we strongly recommend the purchase of the optional

AWK-3131-M12-RCC wallmount kit, which has passed EN 50155 testing.

This wallmount kit is also convenient for other applications that require

mounting the AWK-3131-M12-RCC to a wall.

STEP 1:

Remove the aluminum DIN

Rail

attachment plate from the

AWK

-3131-M12-RCC, and then

attach the wall mount plates

with M3 screws, as shown in the

adjacent diagrams.

STEP 2:

Mounting the

AWK-3131-M12-RCC to a wall requires

screws. Use the

AWK-3131-M12-RCC

device, with wall

mount plates attached, as a guide to mark the correct

location

s of the 3 screws. The heads of the screws

should be less than 6.0 mm in diameter, and the

shafts

should be less than 3.5 mm in diameter, as shown in

the figure at the right.

Do not screw the screws in all the way—leave a space of about 2 mm to

allow room for sliding the wall mount panel between the wall and the

screws.

NOTE

Test the screw head and shank size by inserting the screw into

one of the keyhole shaped apertures of the Wall Mounting Plates

before it is screwed into the wall.

STEP 3:

Once th

e screws are fixed into the

wall, insert the four screw heads

through the large opening of the

keyhole

shaped apertures, and then

slide the

AWK-3131-M12-RCC

downwards, as indicated to the

right. Tighten the

three screws for

added stability.

www.ipc2u.ru

www.moxa.pro

- 7 -

WARNING

•

This equipment is intended to be used in a Restricted

Access

Location, such as a dedicated computer room. Access can

only be gained by SERVICE PERSONS or by USERS who have

been instructed about the fact that the metal chassis of the

equipment is extremely hot and may cause burns.

•

Service persons or users have to pay special attention and

take special precaution before handling the equipment.

•

Access is to be controlled through the use of

a lock and key or

a security identity system, controlled by the authority

responsible for the location. Only authorized, well-trained

professionals are allowed to access the restricted access

location.

•

External metal parts are hot!! Pay special attention or use

special protection before handling.

Wiring Requirements

WARNING

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa AWK-3131-M12-RCC.

WARNING

Safety First!

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum current allowed for each wire size.

If the current goes above the maximum ratings, the wiring could

overheat, causing serious damage to your equipment.

You should also pay attention to the following items:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring with similar electrical characteristics can be bundled

together.

•Keep input wiring and output wiring separate.

•It is strongly advised that you label wiring to all devices in the system

when necessary.

www.ipc2u.ru

www.moxa.pro

- 8 -

ATTENTION

This product is intended to be supplied by a Listed Power Unit

marked

“Class 2” or “LPS” and rated O/P: 12 to 48 VDC

, minimum

6 W (12 V to 48V), 25°C.

ATTENTION

Make sure

the external power adapto

r (includes power cords and

plug assemblies) provided with the unit is certified and suitable

for use in your country.

ATTENTION

Do not use

the PoE Injector. Instead, please use an

IEEE802.3af

or IEEE802.3at

compliant PSE (Power Sourcing Equipment) for

PoE (Power over Ethernet) device.

Grounding the Moxa AWK-3131-M12-RCC

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel.

Wiring the Redundant Power Inputs

The top two pairs of contacts of the 10-contact terminal block connector

on the AWK-3131-M12-RCC’s top panel are used for the

AWK-3131-M12-RCC’s two DC inputs. Top and front views of the terminal

block connector are shown below.

STEP 1:

Insert the negative/positive DC

wires into the

-/V+ terminals.

STEP 2:

To keep the DC wires from pulling

loose, use a

small flat

-blade screwdriver to tighten the

wire

-clamp screws on the front of the terminal

block connector.

STEP 3:

Insert the plastic terminal block connector

prong

s into the terminal block receptor, which is

located on

the AWK-3131-M12-RCC’s top panel.

www.ipc2u.ru

www.moxa.pro

- 9 -

ATTENTION

Before connecting the

AWK-3131-M12-RCC to the DC power

inputs, make sure the DC power source voltage is stable.

Wiring the Relay Contact

The AWK-3131-M12-RCC has one relay output, which consists of the two

contacts of the terminal block on the AWK-3131-M12-RCC’s top panel.

Refer to the previous section for detailed instructions on how to connect

the wires to the terminal block connector, and how to attach the terminal

block connector to the terminal block receptor. These relay contacts are

used to indicate user-configured events. The two wires attached to the

Relay contacts form an open circuit when a user-configured event is

triggered. If a user-configured event does not occur, the Relay circuit will

be closed.

Wiring the Digital Inputs

The AWK-3131-M12-RCC has two sets of digital input—DI1 and DI2. Each

DI comprises two contacts of the 10-pin terminal block connector on the

AWK-3131-M12-RCC’s top panel. You can refer to the “Wiring the

Redundant Power Inputs” section for detailed instructions on how to

connect the wires to the terminal block connector, and how to attach the

terminal block connector to the terminal block receptor.

Cable Holder Installation

You can attach the cable holder to the bottom of the AWK-3131-M12-RCC.

This helps to keep cabling neat and avoid accidents that result from

untidy cables.

STEP 1:

Screw the cable holder onto the bottom of the

AWK

-3131-M12-RCC.

STEP 2:

After mounting the AWK-3131-M12-RCC and plugging in the LAN

cable, tighten the cable along the device and wall.

www.ipc2u.ru

www.moxa.pro

- 10 -

Communication Connections

10/100/1000BaseT(X) Ethernet Port Connection

All AWK-3131-M12-RCCs have a 10/100/1000BaseT(X) Ethernet port

(8-pin shielded M12 connector with A coding). The 10/100/1000TX port

located on the AWK-3131-M12-RCC front panel is used to connect to

Ethernet-enabled devices. Most users configure this port for Auto

MDI/MDI-X mode, in which case the port’s pinouts are adjusted

automatically depending on the type of Ethernet cable used

(straight-through or cross-over), and the type of device (NIC-type or

HUB/Switch-type) connected to the port.

Pinouts for the 10/100/1000BaseT(X) M12 (8-pin) Port

RS-232 Connection

The AWK-3131-M12-RCC has one RS-232 (8-pin RJ45) console port on

the front panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable to

connect the AWK-3131-M12-RCC console port to your PC’s COM port. You

may then use a console terminal program to access the

AWK-3131-M12-RCC for console configuration.

Console Pinouts for 10-pin or 8-pin RJ45

10-Pin

Description

8-Pin

-----

DSR

RTS

GND

TxD

RxD

DCD

CTS

DTR

-----

www.ipc2u.ru

www.moxa.pro

Inhaltsverzeichnis

Andere Moxa Technologies Drahtloser Zugangspunkt Handbücher

Moxa Technologies

Moxa Technologies AirWorks AWK-3251A-M12-RCC Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-4131A Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-3131 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies airworks awk-5232 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-3191 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1151C Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TAP-6226 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1200-AP Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1100 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-3191 Bedienungsanleitung

Moxa Technologies

Moxa Technologies NPort NWH650 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-4131 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-5232-M12-RCC Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-3121B Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-4121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies WAC-1001 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-3131A-M12-RTG Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorksAWK-6232-M12 Handbuch

Moxa Technologies

Moxa Technologies AirWorks AWK-3121-M12-RTG Bedienungsanleitung

Moxa Technologies

Moxa Technologies AWK-1121 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung