Moxi SelectAir Bedienungsanleitung

Innovative health solutions

ENTERPRISES, LLC

ENGLISH

Section 1 Introduction 2-3

Section 2 System Components 4-5

Section 3 Safety Precautions 6

Section 4 Important Safeguards 7-8

Section 5 Installation 9-11

Section 6 Manual Setup 11-13

Section 7 Maintenance 14-15

Section 8 CleaningandDisinfecting 16-18

Section 9 Troubleshooting 19-20

Section 10 SelectAir 21-22

Section 11 SelectAir Max 23-26

Section 12 BariSelect27-31

Section 13 HybridSelect32-34

Section 14 SelectAir Product Information35-36

Section 15 Warranty 37

©MOXI Enterprises, LLC. 2010

The followingaretrademarksandregistered trademarks of The ROHO Group, Inc.: ROHO®,shape fitting

technology®, HIGH PROFILE®,ELIMSTAPH®,Hi-Tor®, Velcro®and Sentinal®areregistered trademarks

of theirrespectivecompanies.

MOXI Enterprises, LLC. hasapolicy of continualproductimprovementandreserves the right to amend

specificationspresented in thisbrochure.

Manufactured by:

Table of Contents

MOXI Enterprises, LLC.

1939 South Vandeventer Avenue, Saint Louis, Missouri 63110

www.moxiusa.com

Toll Free: 1.800.942.7678 •Local: 314.771.5222 • Fax: 314.771.5225

Introduction

SelectAir®low air loss mattress systems are pressure relief mattress systems designed

for the treatment and/or prevention of pressure ulcers and other tissue trauma, including

burns and other wounds. SelectAir systems are designed to work with any standard

hospital mattress and will fit on a variety of different bed frames.

Indications for Use

• Pressure Ulcers • Burns • Geriatrics

• Rehabilitation • Spinal Cord Injury • Arthritis

• Oncology • Orthopedics • Skin Flaps/Grafts

• Multiple Sclerosis • Neurosurgery • Pain Management

• Cardiovascular • Plastic Surgery • Dermatology

• AIDS • Extended Care • ALS

ATTENTION: ELECTRICAL EQUIPMENT

1. Class I equipment

2. Type BF equipment

3. Ordinary equipment

4. Continuous Operation

5. Environmental Conditions:

• Operating Limits:

    Temperature: 50˚-90˚F(10˚Cto32˚C)

Humidity: 80% RH Maximum

    Altitude: 6,560Ft.(2,000Meters)

• Storage Limits:

    Temperature: 32˚-122˚F(0˚Cto50˚C)

Humidity: 80% RH Max.

Section 1 Introduction

Symbol Legend

Attention- See accompanying instructions for use

or information found in this manual or labels on the

control unit.

Electrical Hazard

Fire or Explosion Hazard

Replaceable fuse

On/Off Button

Off Only Button

Function Button

CPR / Emergency Off Button

Auto Comfort Button

Firm Button

Comfort Level Settings (Softer, Firmer)

Lock, Unlock Button

Pulsate Mode

Low Setting Button for Pulsation Mode

Medium Setting Button for Pulsation Mode

(Not available on the HybridSelect model)

High Setting Button for Pulsation Mode

Upright Button

Type BF Equipment

The above symbols are used on product labeling and in this manual as defined by International

Electrotechnical Commission or MOXI Enterprises, LLC.

Softer Firmer

System Components For Mattress Replacement Models

Section 2 System Components

Note: SelectAir and SelectAir Max mattress replacements are available in

different heights, lengths and widths. BariSelect is available in various

widths.

Figure 1

Water Resistant,

Vapor Permeable

Zippered Mattress

Cover

Mattress

Mattress Pad

Control Unit with

flexible hose

attached

Water Resistant,

Vapor Permeable

Mattress Sheet

(optional)

System Components For HybridSelect Mattress Overlay Models

Section 2 System Components

Figure 2

Mattress

Overlay

Control Unit with

flexible hose

attached

Mattress

Sheet

ROHO HIGH

PROFILE

Cushion

HealFloat

Section

Safety Precautions

Please read and thoroughly understand the following safety precautions before

using this product.

WARNINGS

• Explosion risk if used in the presence of flammable substances.

• Risk of fire, replace fuse as marked on control unit:

• Possible fire hazard when used with oxygen administering equipment other

than nasal mask or 1/2 bed length tent type. Oxygen tent shall not extend

below the mattress support level or enclose the control unit.

• Electrical shock hazard. Do not remove back cover.

• Do not use in the presence of smoking materials or open flame. Air flowing

through air mattress will support combustion.

PRECAUTIONS

• Grounding reliability can only be achieved when the power cord supplied

with the control unit is connected to an equivalent grounded receptacle.

• Unplugthecontrolunitfromthewalloutletbeforecleaning(seeSection8).

• Refer all servicing to qualified service personnel.

• For mattress overlays, use a side rail extender if the top of the bed rails are

lessthansix(6)inches(15cm)fromthetopofthemattressoverlay.

• The use of bed frame side rails in conjunction with any SelectAir low air

loss mattress system should be determined based upon facility protocol,

applicable laws and regulations, and individual user safety considerations.

Bed frame side rail usage is not a requirement for the functional operation

of any SelectAir product, but individual safety requirements and/or facility

protocol may dictate that side rails be utilized.

Section 3 Safety Precautions

Important Safeguards

Please read and follow the instructions regarding SelectAir mattress and overlay systems

and retain this manual for future reference. Follow all warnings and instructions marked

on the control unit and mattress as well as those listed in this manual.

Note: DO NOT place liquids on top of the control unit.

Handling

Handle the control unit with care. Dropping it may cause internal damage and can cause

the control unit to malfunction.

Note: DO NOT use a control unit if it appears to be damaged. Consult an

authorized MOXI / SelectAir distributor.

Dust or Dirt

Keep the SelectAir control unit away from excessive dust or dirt, which can cause

premature failure. The control unit is supplied with a replaceable air filter that should

be replaced every 90 days under normal conditions. The air filter should be inspected

and cleaned every month under normal conditions, and more frequently when used in

abnormally dusty or dirty environments.

Cleaning

Unplug the control unit from the wall outlet before cleaning. Do not use harsh liquid

chemicals, cleaning solvents or aerosol cleaners. Water and a mild dish washing

detergent may be used on a soft, damp cloth or paper towel. Please refer to Section 8.

Accessories

Do not place the control unit on an unstable surface because it may fall, causing severe

damage to the control unit. Use only manufacturer-recommended accessories. Any

mounting of the control unit must follow the manufacturer?sinstructions. The hospital

bed footboard must be able to support the control unit and any additional weight.

Heat and Ventilation

Refer to page 2 of this manual for operating and storage limits. It is important that

this opening is not blocked or covered during operation. The control unit should not

be placed in a built-in installation, such as a closet or rack unless proper ventilation is

provided.

Power Sources

The control unit should only be operated from an appropriate AC outlet capable of safely

delivering at least three (3) amps of electrical current. If you are not sure of the type of

power supply available, consult your MOXI / SelectAir distributor or a certified electrician.

Object Entry and Excess Weight

Never push objects of any kind into this product. Excess weight placed on the control unit

can cause damage to the housing.

Grounded Power Cord and Plug

This control unit is equipped with a grounded power cord. The plug will fit into the power

outlet only one way. If you are unable to insert the plug fully into the outlet, contact your

Section 4 Important Safeguards

MOXI / SelectAir distributor prior to operating the control unit. Do not alter the plug to fit

into the power outlet. The power supply cord should be routed so it will not be walked on

or pinched by items placed upon it or against it.

Overloading

Overloading wall outlets can result in a risk of fire or electric shock. A single grounded

extension cord (three wires with grounded plugs) of less than 25 feet (7.6 meters) in

length and with a minimum of a 15 amp rating can be used with the control unit.

Servicing

Do not attempt to service this control unit yourself. Opening or removing the cover may

expose you to hazardous voltages. Refer all servicing to your MOXI / SelectAir distributor.

Breaking or removing calibration seals voids the warranty of the control unit.

Mattress Storage

Clean and disinfect product as per this operation manual and store in a dry environment

at room temperature.

Replacement Parts

When replacement parts are required, be sure that the control unit uses replacement

parts from the manufacturer. Unauthorized substitutions will void the warranty.

Safety Check

Upon completion of any service to this product, the MOXI / SelectAir distributor must

perform safety checks to determine that the product is in a safe operating condition.

Interference

The control unit is designed to prevent radiation of radio-frequency energy. There is no

guarantee that communications or other radio-frequency interference will not occur in

a particular installation. If this control unit does cause harmful interference to radio or

television reception, which can be determined by turning the control unit off and on,

the user is encouraged to try to correct the interference by one or more of the following

steps:

• Make sure electrical cord is properly grounded.

• Relocate the receiving antenna of the device affected.

• Increase the separation between the control unit and the device affected.

• Connect the control unit to an outlet that is on a different circuit than the device being

affected.

Section 4 Important Safeguards

Andere Handbücher für SelectAir

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Moxi Inneneinrichtung Handbücher

Moxi

Moxi FUSAPT80 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung