MRF SS10 Bedienungsanleitung
COPYRIGHT © 2021
MESSER REPAIR AND FABRICATING LLC
SAUK CENTRE, MN
PRINTED IN USA
ALL RIGHTS RESERVED
OPERATOR’S MANUAL
Sand Spreader
Model SS10
Serial Number 13216
Manual# 96375 MAR 2021 ENGLISH
2
Introducon
Using This Manual
The term loader is used in this manual to refer to a skid steer loader.
Your loader operator’s manual contains instructions to safely operate the
loader. Anyone who operates a loader with this attachment installed must
rst read, understand and follow the instructions in the loader operator’s
manual.
This manual contains instructions to safely operate and service the
attachment. Anyone who operates or services the attachment must rst
read, understand and follow the instructions in this manual.
Additional operating or servicing information for the attachment may be
provided online, in video, or in other publications. This additional infor-
mation does not replace, and is not a substitute for reading and following,
the instructions in this manual.
The safety alert symbol is shown in WARNING statements to alert users
to hazards which could cause death or injury. Carefully read and follow
the messages.
IMPORTANT notices alert users to instructions which, if not followed,
could result in damage. Carefully read and follow the messages.
There may be times when the attachment and loader shown in this man-
ual may not be your exact model. The model shown will be close enough
to your attachment or loader to accurately convey the information.
The most current information available is included in this manual. The
publisher may revise this manual at any time and is not required to notify
users of revisions.
Replacement Manuals
Be sure to include this operator’s manual if you sell or transfer owner-
ship of the attachment.
Contact Messer Repair and Fabricating, LLC for a printed manual, or
nd a downloadable manual on our website.
Using This Aachment
The attachment is designed to spread materials placed in the hopper.
The attachment is designed for installation on a full-size loader, connect-
ed to the loader’s front auxiliary hydraulic couplers. The loader must
have a minimum hydraulic system ow capacity of 10 GPM at 2,000 psi
3
Introducon
and must not exceed a ow capacity of 20 GPM or 3,000 psi.
The manufacturer reserves the right to make improvements, and to dis-
continue or change specications, models or design without notice and
without incurring obligation.
Loader Compability
Conrm your loader’s Rated Operating Capacity in the loader operator’s
manual. Do not install the attachment on the loader if it will exceed the
Rated Operating Capacity during operation because this may cause di-
culty in controlling the loader or may cause loader damage.
Product Misuse
Product misuse can cause accidents, injury and death.
The manufacturer of the attachment is not responsible for any harm or
injury resulting from product misuse.
Product misuse includes operating or servicing the attachment without
following the instructions in this manual, using the attachment in any
way for which it was not designed, and modifying the attachment.
Modicaons
Do not modify the attachment in any way.
Manufacturer Contact
Call Messer Repair and Fabricating, LLC at (833) 352-3477, or see us at
www.messerrepair.com.
4
Product Idencaon
Idencaon Numbers
Record your product information to provide when you contact the dealer
or manufacturer.
Sand Spreader
Model SS10
Serial Number 13216-
Serial Number Locaon
Purchase Date
Dealer
Dealer Phone
Model
Serial #
5
Specicaons
Specicaons
Model SS10
Width x Height 114 x 99 cm (45 x 39 in.)
Depth 114 cm (39 in.)
Cubic Feet 10
Spread in Feet 5 to 35
Weight 268 kg (590 lbs.)
6
Safety Decals
Decal Locaons
Locaon Descripon Part Number
A Stand Clear Decal 96028
B Warning Decal 96117
C Warning Decal 96255
STAND CLEAR DECAL 96028
STAND CLEAR WHILE IN OPERATION
7
Safety Decals
WARNING DECAL 96117
HIGH PRESSURE FLUID HAZARD
To prevent serious injury or death:
• Relieve pressure on system before repairing, adjust-
ing or disconnecng.
• Wear proper hand and eye protecon when search-
ing for leaks. Use wood or cardboard instead of
hands.
• Keep all components in good repair.
WARNING DECAL 96255
DO NOT EXCEED 15 GPM
• May result in severe injury or property damage.
• Will void Factory Warranty.
8
Wear Protecve Equipment
• Wear gloves to protect hands from burns if hydraulic couplers be-
come hot during operation.
• Never wear sandals or other light footwear when operating or servic-
ing the attachment. Wear protective footwear when handling blades
or heavy parts.
• Do not wear loose tting clothing which may become entangled
when operating or servicing the attachment.
Parking Safely
1. Follow the instructions in the loader operator’s manual to park the
loader safely.
2. Fully lower the attachment to level ground.
3. Stop the loader engine and remove the key from the switch.
4. Do not leave the loader operator seat until the engine and all other
moving loader and attachment parts have stopped.
5. Follow the instructions in the loader operator’s manual to exit the
loader safely. Use the attachment step area if one is provided.
Operang Aachments Safely
• Do not allow anyone to operate the attachment unless they have rst
read and understood the loader and the attachment operator’s manu-
als.
• Do not allow anyone to operate the attachment unless they have rst
read and understood the safety and warning decals on the loader and
on the attachment.
• The attachment owner is responsible for training others to safely
operate the attachment, and is responsible for any injuries or harm
which occurs while the attachment is being operated.
• If an area to step on the attachment has been provided, be sure to use
it when entering and exiting the loader.
• Before operating, replace any worn or damaged safety decals.
• Before operating, thoroughly inspect the attachment to be sure all
hardware (bolts, nuts, etc.) is installed and tightened.
• Before operating, thoroughly inspect the attachment to be sure it is
Safety
9
Safety
in working order. If the attachment is damaged or otherwise not in
working order, do not operate until it has been repaired by a qualied
technician.
• Before raising or lowering the attachment be sure the area is clear of
bystanders.
• Do not operate the loader or the attachment if you are under the
inuence of alcohol, drugs, or medications which may cause drows-
iness.
• Do not allow children to operate the loader or the attachment.
• Do not allow anyone who has not been trained to operate the loader
or the attachment.
• Never allow riders on the attachment.
• Keep hands, feet or other objects away from underneath the attach-
ment while operating.
• Fully lower the attachment to level ground when you are done oper-
ating.
• Never leave the attachment unattended while in a raised position.
• When transporting the attachment installed on the loader, travel at a
slower speed to maintain control.
Using the Sand Spreader Safely
• Never allow bystanders or animals to stand nearby when operating
the attachment.
• Follow all manufacturer’s instructions, including wearing protective
clothing, when loading materials into the hopper.
Servicing Safely
• Disconnect the attachment hydraulic hoses from the loader before
servicing. Do not service the attachment when the hydraulic hoses
are installed on the loader.
• Remove the attachment from the loader before servicing when in-
structed to do so in this manual.
• Do not allow anyone to service the attachment unless they have rst
read and understood the loader and the attachment operator’s or
10
Safety
service manuals.
• Do not allow anyone to service the attachment unless they have rst
read and understood the safety and warning decals on the loader and
on the attachment.
• The attachment owner is responsible for training others to safely
service the attachment, and is responsible for any injuries or harm
which occurs while the attachment is being serviced.
• Before inspecting or servicing the attachment, follow the Parking
Safely instructions in this manual and disconnect the attachment
hydraulic hoses from the loader.
• Always securely block the attachment to prevent accidental release
of the lifting mechanism when inspecting or servicing the attach-
ment.
Hydraulic Fluid Safety
• Read and understand the hydraulic safety information in the loader
operator’s manual before operating or servicing the attachment.
• Use cardboard or a board when you check for a leak.
• Fluid in hydraulic hoses is under extreme pressure. If uid is injected
into your skin seek medical treatment immediately.
• Do not handle any hydraulic components until pressure has been
relieved from the system.
• Disconnect the attachment hydraulic hoses from the loader before
inspection or service.
• Inspect attachment hydraulic hoses and hose shields for damage or
wear before attaching to the loader.
Safety Decals
Safety decals may be installed on the attachment to warn users of safety
hazards:
• DANGER decals provide warnings about hazardous situations which
will result in death or serious injury if not avoided.
• WARNING decals provide warnings about hazardous situations
which could result in death or seriousinjury if not avoided.
• CAUTION decals provide warnings about hazardous situations
which could result in injury if not avoided.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Streuer Handbücher anderer Marken
Fisher
Fisher POLY-CASTER 78601 Bedienungsanleitung
TurfEx
TurfEx RS7200 Betriebsanleitung
Ferris
Ferris Pathfinder Series Bedienungsanleitung
Fayat Group
Fayat Group DYNAPAC S100 Fehlerbehebungshandbuch
Art's-Way Manufacturing
Art's-Way Manufacturing X700 Installations- und Betriebshandbuch
EASTMAN
EASTMAN CR 500 Bedienungsanleitung
