MRF BG72 Bedienungsanleitung
COPYRIGHT © 2022
MESSER REPAIR AND FABRICATING, LLC
SAUK CENTRE, MN
PRINTED IN USA
ALL RIGHTS RESERVED
OPERATOR’S MANUAL
GRAPPLES
All Models
Serial Number 16418-
Manual# 96371 SEPT 2022 ENGLISH
2
Introducon
Using This Manual
Your loader operator’s manual contains instructions to safely operate the
loader. Anyone who operates a loader with this attachment installed must
rst read, understand and follow the instructions in the loader operator’s
manual.
This manual contains instructions to safely operate and service the
attachment. Anyone who operates or services the attachment must rst
read, understand and follow the instructions in this manual.
Additional operating or servicing information for the attachment may be
provided online, in video, or in other publications. This additional infor-
mation does not replace, and is not a substitute for reading and following,
the instructions in this manual.
The safety alert symbol is shown in WARNING statements to alert users
to hazards which could cause death or injury. Carefully read and follow
the messages.
IMPORTANT notices alert users to instructions which, if not followed,
could result in damage. Carefully read and follow the messages.
There may be times when the attachment and loader shown in this man-
ual may not be your exact model. The model shown will be close enough
to your attachment or loader to accurately convey the information.
The most current information available is included in this manual. The
publisher may revise this manual at any time and is not required to notify
users of revisions.
Replacement Manuals
Be sure to include this operator’s manual if you sell or transfer owner-
ship of the attachment.
Contact Messer Repair and Fabricating, LLC for a printed manual, or
nd a downloadable manual on our website.
Using This Aachment
These attachments are designed for transporting brush and roots, rocks,
manure, and other materials.
The attachment is designed for installation on a full-size loader, connect-
ed to the loader’s front auxiliary hydraulic couplers.
The manufacturer reserves the right to make improvements, and to dis-
3
Introducon
continue or change specications, models or design without notice and
without incurring obligation.
Loader Compability
Conrm your loader’s Rated Operating Capacity (ROC) in the loader op-
erator’s manual. Conrm your attachment’s ROC in SPECIFICATIONS
in this manual.
Do not install the attachment on the loader if the combined weight of
the attachment and attachment load will exceed the loader ROC during
operation because this may cause diculty in controlling the loader or
may cause loader damage.
Do not exceed the attachment’s ROC because this may damage the
attachment.
Attachment compatibility with your loader should be conrmed before
the intitial purchase. If you receive the attachment as part of a later
resale or transfer of ownership, contact the manufacturer to conrm the
attachment is designed to be used with your loader before you install the
attachment.
Product Misuse
Product misuse can cause accidents, injury and death.
The manufacturer of the attachment is not responsible for any harm or
injury resulting from product misuse.
Product misuse includes operating or servicing the attachment without
following the instructions in this manual and in the loader manuals, using
the attachment in any way for which it was not designed, neglecting to
conrm loader compatibility, and modifying the attachment.
Modicaons
Do not modify the attachment in any way.
Manufacturer Contact
Call Messer Repair and Fabricating, LLC at (833) 352-3477, or see us at
www.messerrepair.com.
4
Idencaon Numbers
Record your product information to provide when you contact the dealer
or manufacturer.
Brush and Root Grapple
Manure Fork Grapple
Material Bucket Grapple
Rock Bucket Grapple
Serial Number 16418-
Serial Number Locaon
Product Idencaon
Purchase Date
Dealer
Dealer Phone
Model
Serial #
5
Specicaons
Brush and Root Grapple
Model: 72 Inch BG72
Overall Width x Height 183 x 76 cm (72 x 30 in.)
Weight 342 kg (755 lb.)
Model: 78 Inch BG78
Overall Width x Height 201 x 76 cm (79 x 30 in.)
Weight 358 kg (790 lb.)
Model: 85 Inch BG85
Overall Width x Height 216 x 76 cm (85 x 30 in.)
Weight 370 kg (815 lb.)
Model: All BG72, BG78, BG85
Depth 112 cm (44 in.)
Teeth Thickness 1/2 in. Grade 50
Space Between Teeth 15 cm (6 in.)
Grapple Jaw Opening 107 cm (42 in.)
Cylinders (2) 2 in. x 8 in. 3500 psi welded
cross tube
Manure Fork Grapple
Model: 60 Inch MFG60
Overall Width x Height 152 x 79 cm (60 x 31 in.)
Number of Tines 8
Weight 318 kg (700 lb.)
Model: 68 Inch MFG68
Overall Width x Height 173 x 79 cm (68 x 31 in.)
Number of Tines 9
Weight 340 kg (750 lb.)
6
Specicaons
Manure Fork Grapple
Model: 75 Inch MFG75
Overall Width x Height 191 x 79 cm (75 x 31 in.)
Number of Tines 10
Weight 361 kg (795 lb.)
Model: 84 Inch MFG84
Overall Width x Height 213 x 79 cm (84 x 31 in.)
Number of Tines 11
Weight 381 kg (840 lb.)
Model: All MFG60, MFG68,
MFG75, MFG84
Depth 97 cm (38 in.)
Grapple Jaw Opening 107 cm (42 in.)
Tines Center to Center 20 cm (8 in.)
Cylinders (2) 2 in. x 8 in. 3500 psi welded
cross tube
Material Bucket Grapple
Model: 66 Inch MBG66
Overall Width x Height 191 x 79 cm (67 x 31 in.)
Weight 361 kg (925 lb.)
Capacity/Struck 15.9 cubic .
Capacity/Heaped 19.1 cubic .
Model: 72 Inch MBG72
Overall Width x Height 185 x 79 cm (73 x 31 in.)
Weight 435 kg (960 lb.)
Capacity/Struck 17.3 cubic .
Capacity/Heaped 20.8 cubic .
7
Specicaons
Material Bucket Grapple
Model: 78 Inch MBG78
Overall Width x Height 201 x 79 cm (79 x 31 in.)
Weight 454 kg (1000 lb.)
Capacity/Struck 18.8 cubic .
Capacity/Heaped 22.6 cubic .
Model: 84 Inch MBG84
Overall Width x Height 216 x 79 cm (85 x 31 in.)
Weight 470 kg (1035 lb.)
Capacity/Struck 20.2 cubic .
Capacity/Heaped 24.2 cubic .
Model: All MBG66, MBG72,
MBG78, MBG84
Depth 97 cm (38 in.)
Grapple Jaw Opening 112 cm (44 in.)
Cylinders (2) 2 in. x 8 in. 3500 psi welded
cross tube
Rock Bucket Grapple
Model: 68 Inch RBG68
Overall Width x Height 175 x 79 cm (69 x 30 in.)
Weight 397 kg (875 lb.)
Model: 75 Inch RBG75
Overall Width x Height 191 x 79 cm (75 x 30 in.)
Weight 424 kg (935 lb.)
Model: 82 Inch RBG82
Overall Width x Height 208 x 79 cm (82 x 30 in.)
Weight 445 kg (980 lb.)
8
Rock Bucket Grapple
Model: 88 Inch RBG88
Overall Width x Height 226 x 79 cm (89 x 30 in.)
Weight 465 kg (1025 lb.)
Model: All RBG68, RBG75,
RBG82, RBG88
Depth 107 cm (42 in.)
Teeth Thickness 3/8 in. Grade 50
Space Between Teeth 7.6 cm (3 in.)
Grapple Jaw Opening 107 cm (42 in.)
Cylinders (2) 2 in. x 8 in. 3500 psi welded
cross tube
Specicaons
9
Safety Decals
Decal Locaons
Locaon Descripon Part Number
A Stand Clear Decal 96028
B Warning Decal 96117
STAND CLEAR DECAL 96028
STAND CLEAR WHILE IN OPERATION
WARNING DECAL 96117
HIGH PRESSURE FLUID HAZARD
To prevent serious injury or death:
• Relieve pressure on system before repairing, adjusng or discon-
necng.
• Wear proper hand and eye protecon when searching for leaks. Use
wood or cardboard instead of hands.
• Keep all components in good repair.
10
Wear Protecve Equipment
• Wear gloves to protect hands from burns if hydraulic couplers be-
come hot during operation.
• Never wear sandals or other light footwear when operating or servic-
ing the attachment. Wear protective footwear when handling blades
or heavy parts.
• Do not wear loose tting clothing which may become entangled
when operating or servicing the attachment.
Parking Safely
1. Follow the instructions in the loader operator’s manual to park the
loader safely.
2. Fully lower the attachment to level ground.
3. Stop the loader engine and remove the key from the switch.
4. Do not leave the loader operator seat until the engine and all other
moving loader and attachment parts have stopped.
5. Follow the instructions in the loader operator’s manual to exit the
loader safely. Use the attachment step area if one is provided.
Operang Aachments Safely
• Always be aware of the weight of any loads you are transporting
with an attachment. The weight of any load must not exceed the
attachment’s Rated Operating Capacity. The weight of the attachment
combined with the attachment load must not exceed the loader’s
Rated Operating Capacity.
• Do not allow anyone to operate the attachment unless they have rst
read and understood the loader and the attachment operator’s manu-
als.
• Do not allow anyone to operate the attachment unless they have rst
read and understood the safety and warning decals on the loader and
on the attachment.
• The attachment owner is responsible for training others to safely
operate the attachment, and is responsible for any injuries or harm
which occurs while the attachment is being operated.
• If an area to step on the attachment has been provided, be sure to use
it when entering and exiting the loader.
Safety
Dieses Handbuch passt für folgende Modelle
14
Inhaltsverzeichnis
Andere MRF Traktorzubehör Handbücher
