MRF Quick-Tach MQTP Bedienungsanleitung

MESSER REPAIR AND FABRICATING, LLC

SAUK CENTRE, MN

PRINTED IN USA

OPERATOR’S MANUAL

Quick-Tach Adapters

Models MQTP, MQTP-GLOBAL, MQTP-CHALM-

ERS-500, MQTP-MASSEY/AGCO, MQTP-TV140

Serial Number 13105-

Manual# 96412 JULY 2021 ENGLISH

Introducon

Using This Manual

Your tractor loader operator’s manual contains instructions to safely

operate the tractor loader. Anyone who operates a tractor loader with this

attachment installed must rst read, understand and follow the instruc-

tions in the tractor loader operator’s manual.

This manual contains instructions to safely operate and service the

attachment. Anyone who operates or services the attachment must rst

read, understand and follow the instructions in this manual.

Additional operating or servicing information for the attachment may be

provided online, in video, or in other publications. This additional infor-

mation does not replace, and is not a substitute for reading and following,

the instructions in this manual.

The safety alert symbol is shown in WARNING statements to alert users

to hazards which could cause death or injury. Carefully read and follow

the messages.

IMPORTANT notices alert users to instructions which, if not followed,

could result in damage. Carefully read and follow the messages.

There may be times when the attachment and tractor loader shown in this

manual may not be your exact model. The model shown will be close

enough to your attachment or tractor loader to accurately convey the

information.

The most current information available is included in this manual. The

publisher may revise this manual at any time and is not required to notify

users of revisions.

Replacement Manuals

Be sure to include this operator’s manual if you sell or transfer owner-

ship of the attachment.

Contact Messer Repair and Fabricating, LLC for a printed manual, or

nd a downloadable manual on our website.

Using This Aachment

The attachment is designed to be installed on your tractor loader to attach

a skid-steer attachment to your tractor loader.

The attachment is designed for installation specic tractor loader models.

The manufacturer reserves the right to make improvements, and to dis-

Introducon

continue or change specications, models or design without notice and

without incurring obligation.

Loader Compability

Conrm your tractor loader’s Rated Operating Capacity (ROC) in the

tractor loader operator’s manual. Conrm your attachment’s ROC in

SPECIFICATIONS in this manual.

Do not install the attachment on the tractor loader if the combined weight

of the attachment and attachment load will exceed the tractor loader ROC

during operation because this may cause diculty in controlling the trac-

tor loader or may cause tractor loader damage.

Do not exceed the attachment’s ROC because this may damage the

attachment.

Product Misuse

Product misuse can cause accidents, injury and death.

The manufacturer of the attachment is not responsible for any harm or

injury resulting from product misuse.

Product misuse includes operating or servicing the attachment without

following the instructions in this manual, using the attachment in any

way for which it was not designed, and modifying the attachment.

Modicaons

Do not modify the attachment in any way.

Manufacturer Contact

Call Messer Repair and Fabricating, LLC at (833) 352-3477, or see us at

www.messerrepair.com.

Idencaon Numbers

Record your product information to provide when you contact the dealer

or manufacturer.

Quick-Tach Adapters

MQTP, MQTP-GLOBAL, MQTP-CHALMERS-500, MQTP-MASSEY/AGCO,

MQTP-TV140

Serial Number 13105-

Serial Number Locaon

Purchase Date

Dealer

Dealer Phone

Model

Serial #

Product Idencaon

Specicaons

Model MQTP

Length x Width x Height 112 x 46 x 10 cm

(44 x 18 x 4 in.)

Weight 45 kg (100 lbs.)

Rated Operang Capacity 2268 kg (5000 lbs.)

Model MQTP-GLOBAL

Length x Width x Height 114 x 53 x 15 cm

(45 x 21 x 6 in.)

Weight 57 kg (126 lbs.)

Rated Operang Capacity 2268 kg (5000 lbs.)

Model MQTP-CHALMERS-500

Length x Width x Height 114 x 46 x 18 cm

(45 x 18 x 7 in.)

Weight 57 kg (125 lbs.)

Rated Operang Capacity 1361 kg (3000 lbs.)

Model MQTP-MASSEY/AGCO

Length x Width x Height 119 x 56 x 18 cm

(47 x 22 x 7 in.)

Weight 61 kg (135 lbs.)

Rated Operang Capacity 2268 kg (5000 lbs.)

Model MQTP-TV140

Length x Width x Height 180 x 66 x 38 cm

(71 x 26 x 15 in.)

Weight 163 kg (360 lbs.)

Rated Operang Capacity 2268 kg (5000 lbs.)

Wear Protecve Equipment

• Wear gloves to protect hands from burns if hydraulic couplers be-

come hot during operation.

• Never wear sandals or other light footwear when operating or servic-

ing the attachment. Wear protective footwear when handling blades

or heavy parts.

• Do not wear loose tting clothing which may become entangled

when operating or servicing the attachment.

Parking Safely

1. Follow the instructions in the tractor operator’s manual to park the

tractor loader safely.

2. Fully lower the attachment to level ground.

3. Stop the tractor engine and remove the key from the switch.

4. Do not leave the tractor operator seat until the engine and all other

moving tractor and attachment parts have stopped.

5. Follow the instructions in the tractor operator’s manual to exit the

tractor safely.

Operang Aachments Safely

• Do not allow anyone to operate the attachment unless they have rst

read and understood the tractor loader and the attachment operator’s

manuals.

• Do not allow anyone to operate the attachment unless they have rst

read and understood the safety and warning decals on the tractor

loader and on the attachment.

• The attachment owner is responsible for training others to safely

operate the attachment, and is responsible for any injuries or harm

which occurs while the attachment is being operated.

• Before operating, replace any worn or damaged safety decals.

• Before operating, thoroughly inspect the attachment to be sure all

hardware (bolts, nuts, etc.) is installed and tightened.

• Before operating, thoroughly inspect the attachment to be sure it is

in working order. If the attachment is damaged or otherwise not in

working order, do not operate until it has been repaired by a qualied

Safety

technician.

• Before raising or lowering the attachment be sure the area is clear of

bystanders.

• Do not operate the tractor loader or the attachment if you are under

the inuence of alcohol, drugs, or medications which may cause

drowsiness.

• Do not allow children to operate the tractor loader or the attachment.

• Do not allow anyone who has not been trained to operate the tractor

loader or the attachment.

• Never allow riders on the attachment.

• Keep hands, feet or other objects away from underneath the attach-

ment while operating.

• Fully lower the attachment to level ground when you are done oper-

ating.

• Never leave the attachment unattended while in a raised position.

• When transporting the attachment installed on the tractor loader,

travel at a slower speed to maintain control.

Servicing Safely

• Disconnect the attachment hydraulic hoses from the tractor loader

before servicing. Do not service the attachment when the hydraulic

hoses are installed on the tractor loader.

• Remove the attachment from the tractor loader before servicing

when instructed to do so in this manual.

• Do not allow anyone to service the attachment unless they have rst

read and understood the tractor loader and the attachment operator’s

or service manuals.

• Do not allow anyone to service the attachment unless they have rst

read and understood the safety and warning decals on the tractor

loader and on the attachment.

• The attachment owner is responsible for training others to safely

service the attachment, and is responsible for any injuries or harm

which occurs while the attachment is being serviced.

• Before inspecting or servicing the attachment, follow the Parking

Safely instructions in this manual and disconnect the attachment

Safety

hydraulic hoses from the tractor loader.

• Always securely block the attachment to prevent accidental release

of the lifting mechanism when inspecting or servicing the attach-

ment.

Hydraulic Fluid Safety

• Read and understand the hydraulic safety information in the tractor

loader operator’s manual before operating or servicing the attach-

ment.

• Use cardboard or a board when you check for a leak.

• Fluid in hydraulic hoses is under extreme pressure. If uid is injected

into your skin seek medical treatment immediately.

• Do not handle any hydraulic components until pressure has been

relieved from the system.

• Disconnect the attachment hydraulic hoses from the tractor loader

before inspection or service.

• Inspect attachment hydraulic hoses and hose shields for damage or

wear before attaching to the tractor loader.

Safety Decals

Safety decals may be installed on the attachment to warn users of safety

hazards:

• DANGER decals provide warnings about hazardous situations which

will result in death or serious injury if not avoided.

• WARNING decals provide warnings about hazardous situations

which could result in death or serious injury if not avoided.

• CAUTION decals provide warnings about hazardous situations

which could result in injury if not avoided.

Read and understand all safety decals before operating or servicing the

attachment.

See the Safety Decal Location illustration in this manual to conrm

where decals are installed on the attachment.

Safety decals which are missing, worn or faded must be replaced. Re-

placement safety decal part numbers are included in this manual. Contact

the attachment manufacturer for replacement decals.

Installing the Quick-Tach Adapter on the Tractor Loader

Picture Note: For easier installation on some loader models you may

need to tilt the Adapter at an angle as shown.

1. Move the wedge levers (A) to the upright position as shown before

installing on the tractor loader.

IMPORTANT

AVOID DAMAGE!

The wedge pins in the Adapter may be damaged

if they are extended during installaon. Move the

wedge levers to the unlocked (up) posion before

installaon on, and aer removal from, the loader.

Installing and Removing

Installing on Tractor Loader (Model MQTP, MQTP-GLOBAL)

1. Follow the instructions in the tractor loader operator’s manual to

install the attachment and exit the operator station safely.

2. Follow the instructions to attach the tractor loader to the Adapter at

the attaching points (A).

Installing on Tractor Loader (Model MQTP-CHALMERS-500)

1. Follow the instructions in the tractor loader operator’s manual to

install the attachment and exit the operator station safely.

2. Follow the instructions to attach the tractor loader to the Adapter at

the attaching points (A).

Installing and Removing

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MRF Traktorzubehör Handbücher

MRF

MRF BG72 Bedienungsanleitung

MRF

MRF TB8X21 Bedienungsanleitung

MRF

MRF SB60A Bedienungsanleitung

MRF

MRF MQTP-JD120-500 Bedienungsanleitung

MRF

MRF TS36 Bedienungsanleitung

MRF

MRF BS96 Bedienungsanleitung

Beliebte Traktorzubehör Handbücher anderer Marken

Land Pride

Land Pride SGC0548 Bedienungsanleitung

Swisher

Swisher Versa Commercial Pro VSP50 Bedienungsanleitung

matev

matev FPS-FKH-Kioti CX 2510 Bedienungsanleitung

matev

matev SCA-130 Bedienungsanleitung

Toro

Toro 08733 Bedienungsanleitung

Avantco

Avantco A425119 Bedienungsanleitung

FTS

FTS G-FTL Series Bedienungsanleitung

Sami

Sami 150-50 Bedienungsanleitung

CAMSO

CAMSO TTS 30 Series Bedienungsanleitung

Luda

Luda tractorCam S Bedienungsanleitung

HLA

HLA BALE KNIFE Series Bedienungsanleitung

P.Lindberg

P.Lindberg 9059890 Betriebsanleitung

Ventrac

Ventrac KD482 Bedienungsanleitung

Original Tractor Cabs

Original Tractor Cabs 4421381 Datenblatt

Grouser Products

Grouser Products 760 Bedienungsanleitung

Degelman

Degelman Landroller Programmierhandbuch

Bush Hog

Bush Hog BS1 Series Bedienungsanleitung

MX MX A104 Bedienungsanleitung