MSA PremAire Cadet Escape Respirator Einrichtungshandbuch

PremAire® Cadet

Escape Respirator:

Carrier and Harness

MSA 014 (L) Rev. 0 © MSA 2010 Prnt. Spec. 10000005389 (I) Mat. 10110431

Doc. 10110431

MAINTENANCE AND REPAIR

MSA 014 (L) Rev. 0 - 10110431

CARRIER AND HARNESS

TABLE OF CONTENTS

Carrier and Harness...........................................................2

Parts List ............................................................................2

DISASSEMBLY ..................................................................3

Hoses .................................................................................4

Cylinder Carrier ..................................................................4

Harness ..............................................................................5

REASSEMBLY ...................................................................5

Harness ..............................................................................6

Strap Carrier .......................................................................7

Bag Carrier .........................................................................7

Hoses .................................................................................8

Item Part Number Description

1 10037253 Optional Shoulder Pad (Kevlar only)

10071047 Nylon Shoulder Strap

10071048 Kevlar Shoulder Strap

10071049 Nylon Pull Strap

10071050 Kevlar Pull Strap

4 10022245 Belt Mount

5 10040450 Side Buckle (male only)

10071091 Nylon Waist Strap

10071093 Kevlar Waist Strap

10071092 Nylon Waist Strap (large)

10071094 Kevlar Waist Strap (large)

10073512 Nylon Hose Strap

10073513 Kevlar Hose Strap

Strap Carrier (Complete)

10073516 Nylon Strap Carrier

10073517 Kevlar Strap Carrier

9 10062798 Clamp (2 required)

10071095 Strap, Nylon (2 required)

10071096 Strap, Kevlar (2 required)

10061349 Nylon Bag Carrier for 5 minute carbon cylinder

10061353 Kevlar Bag Carrier for 5 minute carbon cylinder

10061350 Nylon Bag Carrier for 10 minute carbon cylinder

10061354 Kevlar Bag Carrier for 10 minute carbon cylinder

10078802 Nylon Bag Carrier for 15 minute carbon cylinder

10078803 Kevlar Bag Carrier for 15 minute carbon cylinder

Carrier and Harness Parts List

DISASSEMBLY

Hoses

1. If necessary, use an

11/16” wrench to dis-

connect the supply

hose.

2. If necessary, use an

11/16” wrench to dis-

connect the second

stage regulator hose.

Strap Carrier

1. Use the o-ring removal

tool to remove the o-

rings. Discard the o-

rings.

Note: Be careful not to

scratch the o-ring groove.

2. Remove the ring from

the split ring.

3. Disconnect the hose

strap.

4. Disconnect the cylinder

carrier from the shoul-

der strap and pull strap.

5. Use the slot head

screwdriver bit or 9/32”

socket to unscrew the

clamps.

5. Pass the clamps

through the carrier

straps.

3MSA 014 (L) Rev. 0 - 10110431

CARRIER AND HARNESS

Harness

1. Unweave the waist strap from the male buckle.

2. Remove the belt mount.

3. Pass the waist strap

through the shoulder

strap and pull strap.

4. Remove the waist strap

from the pull strap.

5. Unweave the pull strap

from the friction buckle.

6. Remove the second stage hose from the shoulder

strap.

7. If present, remove the

shoulder pad.

REASSEMBLY

Note: The following procedures reassemble the respirator

for use with the cylinder mounted on the right hip. See

PremAire® Cadet Escape Open-Circuit,

Pressure-Demand, Escape, Self-Contained

Breathing Apparatus or Combination, Open-

Circuit, Pressure-Demand, Escape, Self-

Contained Breathing Apparatus and Type C,

Supplied-Air Respirator, Operation and

Instructions (P/N 10063148) for instructions on

converting to left-hip mounting.

MSA 014 (L) Rev. 0 - 10110431

CARRIER AND HARNESS

Harness

Nylon Shoulder Strap 10071047

Kevlar Shoulder Strap 10071048

Nylon Pull Strap 10071049

Kevlar Pull Strap 10071050

Belt Mount 10022245

Side Buckle (Male only) 10040450

Nylon Waist Strap 10071091

Kevlar Waist Strap 10071093

Nylon Waist Strap (Large) 10071092

Kevlar Waist Strap (Large) 10071094

1. Pass the shoulder strap

through the optional

shoulder pad.

2. Weave the pull strap through the friction buckle.

a. Pass the pull strap from back to front through the

buckle.

b. Pass the strap over the bar and from front to back

through the buckle.

Note: Make sure the stiffener is properly oriented.

3. Pass the waist strap through the shoulder strap.

Note: Make sure the

stiffener is properly

oriented.

4. Install the belt mount to

the pull strap.

5. Weave the waist strap through the male

buckle.

Strap Carrier

Nylon Strap Carrier 10073516

Kevlar Strap Carrier 10073517

Nylon Hose Strap 10073512

Kevlar Hose Strap 10073513

1. Position the straps

equal distances to the

left and right of the

centerline.

a. Position the clamps

at the edges of the

label.

5MSA 014 (L) Rev. 0 - 10110431

CARRIER AND HARNESS

b. Use a slot head

screwdriver bit or

9/32” socket and

inch-pound torque

wrench to tighten to

35 ± 10 in.lbs.

2. Attach the carrier to the

shoulder strap and pull

strap.

3. Attach the hose strap to

the shoulder strap.

4. Attach the hose strap to

the ring.

5. If necessary, reconnect the supply and second stage

regulator hoses.

Bag Carrier

Nylon Bag Carrier for 5 minute carbon cylinder 10061349

Kevlar Bag Carrier for 5 minute carbon cylinder 10061353

Nylon Bag Carrier for 10 minute carbon cylinder 10061350

Kevlar Bag Carrier for 10 minute carbon cylinder10061354

Nylon Bag Carrier for 15 minute carbon cylinder 10078802

Kevlar Bag Carrier for 15 minute carbon cylinder10078803

1. Attach the carrier to the

shoulder strap and pull

strap.

2. Attach the hose strap.

Hoses

1. Replace the o-rings.

a. Apply a small amount of Christo-Lube to a new

o-ring.

b. Carefully stretch the

new o-ring onto the

hose.

c. Use the o-ring

removal tool to slide

the o-ring into the

groove.

Note: Be careful not to

scratch the o-ring groove.

MSA 014 (L) Rev. 0 - 10110431

CARRIER AND HARNESS

d. If necessary, use an 11/16” crowfoot and inch-pound

torque wrench to connect the supply hose and

tighten to 125 +/- 25 in.lbs.

2. If necessary, use an 11/16” crowfoot and inch-pound

torque wrench to connect the second stage regulator

hose and tighten to 125 +/- 25 in.lbs.

7MSA 014 (L) Rev. 0 - 10110431

Inhaltsverzeichnis

Andere MSA Sicherheitsausrüstung Handbücher

MSA

MSA NC-217 Bedienungsanleitung

MSA

MSA PrimaX IR Bedienungsanleitung

MSA

MSA NightFighter Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

MSA

MSA GVC Series Bedienungsanleitung

MSA

MSA SCBA Basic Apparatus AirGo Bedienungsanleitung

MSA

MSA V-GARD 900 Series Bedienungsanleitung

MSA

MSA Latchways PRD 68220 Bedienungsanleitung

MSA

MSA V Series Bedienungsanleitung

MSA

MSA ProtoAir FPA-W44 Bedienungsanleitung

MSA

MSA V-SHOCK Bedienungsanleitung

MSA

MSA M1 Installationsanleitung

MSA

MSA OptimAir 3000 Bedienungsanleitung

MSA

MSA Suretyman Rescue Utility System Bedienungsanleitung

MSA

MSA V-TEC SRL Bedienungsanleitung

MSA

MSA ULTIMA X5000 Benutzerhandbuch

MSA

MSA SSR 30/100 Bedienungsanleitung

MSA

MSA HUB Bedienungsanleitung

MSA

MSA alphaBELT Pro Bedienungsanleitung

MSA

MSA Workman SRL-R Bedienungsanleitung

MSA

MSA V-SHOCK PFL Bedienungsanleitung

MSA

MSA left/RIGHT Bedienungsanleitung

MSA

MSA AirXpress One Fire Bedienungsanleitung

MSA

MSA Rail Slider Bedienungsanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung

GRIDMESH ANCHOR

GRIDMESH ANCHOR GA01 Bedienungsanleitung