MSI US54G Bedienungsanleitung

1. ENGLISH................................................…3

2. DEUTSCH................................................13

3. FRANÇAIS...............................................23

4. ESPAÑOL................................................33

5. ITALIANO.................................................43

6. NEDERLANDS........................................ 53

7. ČESKY..................................................... 63

8. PORTUGUÊS.......................................... 73

9. POLSKI....................................................83

10. PУCCKИЙ................................................93

11. Polski.....................................................103

12. Pols........................................................113

13. Polski.....................................................123

14. ไทย...................................................….133

15. 简体中文.................................................143

16. 繁體中文.................................................153

Version 1.0

P/N: G52-C6861X1

For Radio Product (purly) (EMC+LVD+RF)

EC DECLARATION OF CONFORMITY (EUROPE)

MICRO-STAR INTERNATIONAL declares that the Wireless 11g USB2.0

Stick (MSI US54G) conforms to the specifications listed below, following

the provisions of the European R&TTE directive 1999/5/EC and Low

Voltage Directive 73/23/EEC:

EN 301 489-1..., EN301 489-n (n depends on product requirement) General

EMC requirements,

EN 609 50 Safety requirement,

EN 300 328-2 Technical requirement for Radio equipment.

NOTE: This equipment is intended to be used in all EU and EFTA countries.

Outdoor use may be restricted to certain frequencies and/or may require a

license for operation. For more details, please contact MICRO-STAR

INTERNATIONAL.

NOTE: Combinations of power levels and antennas resulting in a radiated

power level of above 100 mW are considered as not compliant with the

above mentioned directive and are not allowed for use within the European

community and countries that have adopted the European R&TTE directive

1999/5/EC and/or the CEPT recommendation Rec 70.03. For more details

on legal combinations of power levels and antennas, please contact

MICRO-STAR INTERNATIONAL.

Technical Support:

1. Visit the MSI website for technical guide, driver and software updates,

and other information: http://www.msi.com.tw/

2. Contact our technical staff at: [email protected]

ENGLISH

Before You Begin

This Quick Start Guide can be used for your MSI US54G – the

Wireless 11g USB2.0 Stick, providing you with easy installation steps

to help you build your network easily and quickly. For further

instructions, please refer to your User’s Guide. For the latest

information or other technical support, please visit MSI website at:

http://www.msi.com.tw.

How to Use This Guide

If you want to... refer to...

install your wireless network adapter page 5

install software page 6 ~ 7

connect the network page 8 ~ 11

QuickStartGuide

Hardware Installation

Connection 1

The hardware installation for US54G is simply plugging it into an

available USB port on your desktop/notebook computer.

Connection 2

If necessary, you can connect the provided USB cable to your

computer, and connect US54G to the cable.

USB port

Installing US54G

Software Setup

After installing the wireless adapter to your computer and then turning

on the computer, the operating system will detect a new device and

start the configuration automatically. Please CANCEL the system’s

Add New Hardware Wizard here to install the required driver and

utility from InstallShield Wizard of your Software CD.

Insert the Software CD into your CD-ROM drive, and the Setup

program should launch automatically.

If the Autorun program does not launch automatically, click Start at

the taskbar and select Run.... Type E:\setup.exe (where E is your

CDROM drive) in the Open box and click OK to launch the Setup

program manually.

The main screen of Setup program will appear as below. Click the

Install Software button.

QuickStartGuide

Software Setup (2)

The welcome screen of InstallShield Wizard appears. Click Next.

Read and accept the License Agreement; then, click Next.

In the following window, enter the user’s information (User Name and

Organization) in the respective fields; then, click Next.

Click Install and the program will copy the necessary files to the

system. The progress indicator shows the installing status.

Click Finish when the installation is completed. The MSI Wireless

LAN icon will appear in the status area.

MSI Wireless LAN icon

[

Connecting Network

After installing the software, the MSI wireless adapter provides you

with a convenient and powerful utility that allows you to set up,

configure, and know your networking status easily and clearly.

Your MSI wireless adapter can be used by two networking modes:

Infrastructure mode and Ad-hoc mode.

Infrastructure Mode allows your computer to communicate with the

other computers in the network through an Access Point.

To connect the Access Point:

1. Click the MSI Wireless LAN icon to bring up the Wireless

Network Connection window.

2. In the list of Available wireless networks, select (highlight) the

network you want, and then click Connect.

select

click

QuickStartGuide

Connecting Network (2)

Advanced Settings for Infrastructure Mode

Follow the instructions below to configure advanced settings in the

Infrastructure mode.

1. Click Advanced in the Wireless Network Connection window.

2. You can click Refresh to search the available Access Points in the

network again. The results will be displayed in the Available

Networks field.

3. Select one network (Access Point) you want, and click Configure

to set up the selected network.

4. For security purpose, you can set up the Network Key and

Authentication.

5. Click OK to complete the configuration. The MSI Wireless LAN

icon indicates the connection status.

Connecting Network (3)

Ad-hoc Mode allows your computer to communicate directly with any

computer installed with compatible wireless adapter.

To build the Ad-hoc network:

1. Click the MSI Wireless LAN icon to bring up the Wireless

Network Connection window. Then, click Advanced.

2. Click Add.

3. Set up the Network Name (SSID) and Network Key (if needed)

for the Ad-hoc network.

4. Check “This is a computer-to-computer [ad hoc] network;

wireless access points are not used” option and click OK to

enable the Ad-hoc mode, and return to the Wireless Connection

window.

Andere Handbücher für US54G

Inhaltsverzeichnis

Sprachen:

Andere MSI Adapter Handbücher

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung